Date
1 - 11 of 11
IC-705
|
Larry Stowell K1ZW
Has anybody interfaced an Icom IC-705 yet???
I need help 73 Larry K1ZW
|
|
|
|
Scott Davis
Hi Larry,
Thanks for your e-mail. What is the rig ID and cat specifications for the 705 from your manual? 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 10:32 am Subject: [N3FJPSoftwareUsers] IC-705 Has anybody interfaced an Icom IC-705 yet???
I need help 73 Larry K1ZW
|
|
|
|
AI3KS
Scott, Larry,
toggle quoted messageShow quoted text
Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual. Think I would try setting it up as a 7300, change the address and see what happens. Steve, AI3KS
On 20/10/11 10:36, Scott Davis via
groups.io wrote:
|
|
|
|
Scott Davis
Thanks Steve, yes, that should do it.
Larry, please let us know how you make out.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: AI3KS <AI3KS.01@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 11:01 am Subject: Re: [N3FJPSoftwareUsers] IC-705
Scott, Larry,
Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual. Think I would try setting it up as a 7300, change the address and see what happens. Steve, AI3KS On 20/10/11 10:36, Scott Davis via
groups.io wrote:
Hi
Larry,
Thanks for your e-mail. What is the rig ID and cat
specifications for the 705 from your manual?
73, Scott
N3FJP
Serving the Amateur Radio community with contesting
and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared
to give an answer to everyone who asks you to give the reason for the hope that you have.
But do this with gentleness and respect...
-----Original
Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 10:32 am Subject: [N3FJPSoftwareUsers] IC-705 Has anybody interfaced an Icom
IC-705 yet???
I need help 73 Larry K1ZW
|
|
|
|
Larry Stowell K1ZW
Scott & Steve I got it working in the PAQSOP but not in N3FJP I'll look closer tomorrow. and let you know( I really like the 705)' 73 Larry K1ZW
On 10/11/2020 11:51 AM, Scott Davis via
groups.io wrote:
|
|
|
|
Scott Davis
Hi Larry,
Thanks for the good report! From the PAQP software, on the rig interface page, while the program is polling your 705, click Save Settings under the Rig List.
Start AC Log and click Load Settings and select the file you saved.
That will do the trick.
Please click the Copy to Clipboard button on the rig interface form and send along your 705 settings, so that I can add them to the web site.
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 6:51 pm Subject: Re: [N3FJPSoftwareUsers] IC-705 Scott & Steve
I got it working in the PAQSOP but not in N3FJP I'll look closer
tomorrow.
and let you know( I really like the 705)'
73 Larry K1ZW
On 10/11/2020 11:51 AM, Scott Davis via
groups.io wrote:
Thanks
Steve, yes, that should do it.
Larry, please let us know how you make out.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting
and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared
to give an answer to everyone who asks you to give the reason for the hope that you have.
But do this with gentleness and respect...
-----Original
Message-----
From: AI3KS <AI3KS.01@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 11:01 am Subject: Re: [N3FJPSoftwareUsers] IC-705 Scott, Larry,
Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual. Think I would try setting it up as a 7300, change the address and see what happens. Steve, AI3KS On 20/10/11
10:36, Scott Davis via groups.io wrote:
Hi Larry,
Thanks for your e-mail. What is the rig ID and
cat specifications for the 705 from your manual?
73, Scott
N3FJP
Serving the Amateur Radio community with
contesting and general logging software since
1997.
1 Peter 3 vs 15: Always be
prepared to give an answer to everyone who
asks you to give the reason for the hope that you
have. But do this with
gentleness and respect...
-----Original
Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 10:32 am Subject: [N3FJPSoftwareUsers] IC-705 Has anybody interfaced an
Icom IC-705 yet???
I need help 73 Larry K1ZW
|
|
|
|
Larry Stowell K1ZW
Scott & Steve Very easy I changed the CI-V address to 98h same as my 7610. The 705 greats to more com ports, so that's all I changed, com port. I was surprised that the 705 doesn't have a baud rate setting. Everything should be that easy 73 Larry K1ZW
On 10/11/2020 11:51 AM, Scott Davis via groups.io wrote:
|
|
|
|
Art Olson
Scott
Here are my settings for the ICOM 705
Rig Name = Icom Read Frequency Command = FE FE A4 E0 03 FD Read Mode Command = FE FE A4 E0 04 FD Convert To Hex = True Com Port Name = COM8 Baud Rate = 56000 Parity = None Stop Bits = 1 Data Bits = 8 Power Option = RTS Numeric Frequency = 21.446 String Frequency = 21.44600 Mode = SSB Polling Rig = True Polling Rate = 2000 Return Mode = True Return Frequency = True Mode From Frequency = False Version = Rig Interface Setup 2.8 (Ctrl R) Buffer = þþ¤à ýþþठBuffer Converted from HEX = FE FE A4 E0 03 FD FE FE E0 A4 03 00 60 44 21 00 FD
73 Art N2AJO
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Sunday, October 11, 2020 8:10 PM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] IC-705
Hi Larry,
Thanks for the good report! From the PAQP software, on the rig interface page, while the program is polling your 705, click Save Settings under the Rig List.
Start AC Log and click Load Settings and select the file you saved.
That will do the trick.
Please click the Copy to Clipboard button on the rig interface form and send along your 705 settings, so that I can add them to the web site.
Enjoy! 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Scott & Steve I got it working in the PAQSOP but not in N3FJP I'll look closer tomorrow. and let you know( I really like the 705)' 73 Larry K1ZW On 10/11/2020 11:51 AM, Scott Davis via groups.io wrote: Thanks Steve, yes, that should do it.
Larry, please let us know how you make out.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Scott, Larry, On 20/10/11 10:36, Scott Davis via groups.io wrote: Hi Larry,
Thanks for your e-mail. What is the rig ID and cat specifications for the 705 from your manual? 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Has anybody interfaced an Icom IC-705 yet???
|
|
|
|
Scott Davis
Super, thanks loads Art! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Art Olson <olson339@...> To: N3FJPSoftwareUsers@groups.io Sent: Mon, Oct 12, 2020 4:11 pm Subject: Re: [N3FJPSoftwareUsers] IC-705 Scott
Here are my settings for the ICOM 705
Rig Name = Icom
Read Frequency Command = FE FE A4 E0 03 FD
Read Mode Command = FE FE A4 E0 04 FD
Convert To Hex = True
Com Port Name = COM8
Baud Rate = 56000
Parity = None
Stop Bits = 1
Data Bits = 8
Power Option = RTS
Numeric Frequency = 21.446
String Frequency = 21.44600
Mode = SSB
Polling Rig = True
Polling Rate = 2000
Return Mode = True
Return Frequency = True
Mode From Frequency = False
Version = Rig Interface Setup 2.8 (Ctrl R)
Buffer = þþ¤à
ýþþठBuffer Converted from HEX = FE FE A4 E0 03 FD FE FE E0 A4 03 00 60 44 21 00 FD
73
Art N2AJO
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Sunday, October 11, 2020 8:10 PM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] IC-705 Hi Larry,
Thanks for the good report! From the PAQP software, on the rig interface page, while the program is polling your 705, click Save Settings under the Rig List.
Start AC Log and click Load Settings and select the file you saved.
That will do the trick.
Please click the Copy to Clipboard button on the rig interface form and send along your 705 settings, so that I can add them to the web site.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 6:51 pm Subject: Re: [N3FJPSoftwareUsers] IC-705 Scott & Steve
I got it working in the PAQSOP but not in N3FJP I'll look closer tomorrow.
and let you know( I really like the 705)'
73 Larry K1ZW
On 10/11/2020 11:51 AM, Scott Davis via groups.io wrote:
Thanks Steve, yes, that should do it.
Larry, please let us know how you make out.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: AI3KS <AI3KS.01@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 11:01 am Subject: Re: [N3FJPSoftwareUsers] IC-705 Scott, Larry,
Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual. Think I would try setting it up as a 7300, change the address and see what happens. Steve, AI3KS On 20/10/11 10:36, Scott Davis via groups.io wrote:
Hi Larry,
Thanks for your e-mail. What is the rig ID and cat specifications for the 705 from your manual?
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 11, 2020 10:32 am Subject: [N3FJPSoftwareUsers] IC-705 Has anybody interfaced an Icom IC-705 yet???
I need help 73 Larry K1ZW
|
|
|
|
Larry Stowell K1ZW
Here it is Scott
I have a IC-7610 and its setup the same so all I have to do is change the com port Rig Name = Icom2 Read Frequency Command = FE FE 98 E0 03 FD Read Mode Command = FE FE 98 E0 04 FD Convert To Hex = True Com Port Name = COM11 Baud Rate = 115200 Parity = None Stop Bits = 1 Data Bits = 8 Power Option = None Numeric Frequency = 7.172 String Frequency = 7.17200 Mode = SSB Polling Rig = True Polling Rate = 100 Return Mode = True Return Frequency = True Mode From Frequency = False Version = Rig Interface Setup 2.8 (Ctrl R) Buffer = þþà Buffer Converted from HEX = FE FE E0 98 04 00 02 FD 73 Larry K1ZW
|
|
|
|
Scott Davis
Thanks Larry! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...> To: N3FJPSoftwareUsers@groups.io Sent: Mon, Oct 12, 2020 6:08 pm Subject: [N3FJPSoftwareUsers] IC-705 Here it is Scott
I have a IC-7610 and its setup the same so all I have to do is change
the com port
Rig Name = Icom2
Read Frequency Command = FE FE 98 E0 03 FD
Read Mode Command = FE FE 98 E0 04 FD
Convert To Hex = True
Com Port Name = COM11
Baud Rate = 115200
Parity = None
Stop Bits = 1
Data Bits = 8
Power Option = None
Numeric Frequency = 7.172
String Frequency = 7.17200
Mode = SSB
Polling Rig = True
Polling Rate = 100
Return Mode = True
Return Frequency = True
Mode From Frequency = False
Version = Rig Interface Setup 2.8 (Ctrl R)
Buffer = þþà
Buffer Converted from HEX = FE FE E0 98 04 00 02 FD
73 Larry K1ZW
|
|
|