Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:

http://www.n3fjp.com/programs/ACLBETA.exe

Be well and enjoy!

73, Kimberly, KA3SEQ

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff

207-944-3297 (c)

 

Jim,

I had the exact issue on two computers, and the Beta resolved it.  I did a complete uninstall and removed the user directories so everything was fresh.

Rick, KN3C

On 2/23/2021 09:57, James Goff wrote:

Thanks, Kimberly. You mention uninstalling the current version. Is that step necessary or can I install BETA right over the existing program?

-Jim

James H. Goff

207-944-3297 (c)

 

On Mon, Feb 22, 2021 at 7:29 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:

http://www.n3fjp.com/programs/ACLBETA.exe

Be well and enjoy!

73, Kimberly, KA3SEQ

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff

207-944-3297 (c)

 

Jim,

I had the exact issue on two computers, and the Beta resolved it.  I did a complete uninstall and removed the user directories so everything was fresh.

Rick, KN3C

On 2/23/2021 09:57, James Goff wrote:

Thanks, Kimberly. You mention uninstalling the current version. Is that step necessary or can I install BETA right over the existing program?

-Jim

James H. Goff

207-944-3297 (c)

 

On Mon, Feb 22, 2021 at 7:29 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:

http://www.n3fjp.com/programs/ACLBETA.exe

Be well and enjoy!

73, Kimberly, KA3SEQ

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff

207-944-3297 (c)