Can't get AC Log to connect to my IC-705

Scott Davis

If anyone has any insights for Jonathan, they would be much appreciated!

73, Scott

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: ka6usa@...
Sent: Mon, Feb 1, 2021 2:41 pm
Subject: [N3FJPSoftwareUsers] Can't get AC Log to connect to my IC-705

Hi Friends, I still can't get the 705 to connect. I can get the frequency command to work but that's all. Running v 6.8 on Win 10.

I've read all on this thread. Some are conflicting. Here are my settings. Welcoming any hints. Thanks. de KA6USA.

Rig Name = Icom and Icom2 (tried both)
Read Frequency Command = FE FE A4 E0 03 FD
Read Mode Command = FE FE A4 E0 04 FD
Convert To Hex = True
Com Port Name = COM4 (there are two - COM4 is the CI-V)
Baud Rate = 9600 (matches the speed in my device manager - also tried 56k)
Parity = None
Stop Bits = 1
Data Bits = 8
Power Option = RTS (tried RTS and None)
Polling Rate = 2000


Don't know what changed but all working now. Sorry for the fire drill. 73, Jonathan