rig interface
|
I dont see where this a column to automaticly enter the frequency for the contact worked. Is this not a feature? I dont see the column in the video or on the sample page
|
|
|
|
Scott Davis
Hi dbeck,
Thanks for your e-mail. Frequency is recorded in all my contest software when rig interface is enabled. To display the frequency column, press Ctrl + Shift + F. More details are here:
http://www.n3fjp.com/faq.html#q74
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: dbeck@... To: N3FJPSoftwareUsers@groups.io Sent: Sun, Oct 25, 2020 10:35 pm Subject: [N3FJPSoftwareUsers] rig interface I dont see where this a column to automaticly enter the frequency for the contact worked. Is this not a feature? I dont see the column in the video or on the sample page
|
|
|
|
Not working. I have a Yaesu 991a. Using com 1. Not polling. Would love to buy this program but it’s not seeing my rig and can’t get the Frequency to show in the fields
toggle quoted messageShow quoted text
DR Beck Toolbox Productions,Inc.
On Oct 26, 2020, at 03:21, Scott Davis via groups.io <SNKDavis@...> wrote:
|
|
|
|
Justin Lentz KF5IVJ
Are you sure that is the com port for the radio when installing the yaesu drivers
Justin Lentz KF5IVJ
Ellis County Amateur Radio Club President and Program Officer
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Donald R Beck <dbeck@...>
Sent: Monday, October 26, 2020 1:20:52 PM To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> Subject: Re: [N3FJPSoftwareUsers] rig interface Not working. I have a Yaesu 991a. Using com 1. Not polling. Would love to buy this program but it’s not seeing my rig and can’t get the Frequency to show in the fields
DR Beck
Toolbox Productions,Inc.
On Oct 26, 2020, at 03:21, Scott Davis via groups.io <SNKDavis@...> wrote:
|
|
|
|
Scott Davis
Hi DR,
Thanks for your follow up. I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:
http://www.n3fjp.com/help/righelp.html
Thanks for your interest in my software! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Donald R Beck <dbeck@...> To: N3FJPSoftwareUsers@groups.io Sent: Mon, Oct 26, 2020 2:20 pm Subject: Re: [N3FJPSoftwareUsers] rig interface Not working. I have a Yaesu 991a. Using com 1. Not polling. Would love to buy this program but it’s not seeing my rig and can’t get the Frequency to show in the fields
DR Beck
Toolbox Productions,Inc.
On Oct 26, 2020, at 03:21, Scott Davis via groups.io <SNKDavis@...> wrote:
|
|
|
|
I use Comm Port 3 for my Yaesu 1200.
Jeff KB6CA
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Justin Lentz
Sent: October 26, 2020 11:22 AM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] rig interface
Are you sure that is the com port for the radio when installing the yaesu drivers
Justin Lentz KF5IVJ Ellis County Amateur Radio Club President and Program Officer From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Donald R Beck <dbeck@...>
Not working. I have a Yaesu 991a. Using com 1. Not polling. Would love to buy this program but it’s not seeing my rig and can’t get the Frequency to show in the fields DR Beck Toolbox Productions,Inc.
|
|
|