Date
1 - 2 of 2
Rig control Settings for FT-100D
|
I used these rig control settings for my Yaesu FT-100D with an FTDI FT232 cable I got on Amazon for $19.
Yaesu 100D Rig Name = Yaesu 100D Read Frequency Command = 00 00 00 02 10 Read Mode Command = Convert To Hex = True Baud Rate = 4800 Parity = None Stop Bits = 2 Data Bits = 8 Power Option = None Polling = 500ms 73, Noel W2MSA
|
|
|
|
Scott Davis
Thanks for the good report Noel!
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Noel W2MSA <noelw2msa@...> To: N3FJPSoftwareUsers@groups.io Sent: Thu, Oct 22, 2020 9:58 pm Subject: [N3FJPSoftwareUsers] Rig control Settings for FT-100D I used these rig control settings for my Yaesu FT-100D with an FTDI FT232 cable I got on Amazon for $19.
Yaesu 100D Rig Name = Yaesu 100D Read Frequency Command = 00 00 00 02 10 Read Mode Command = Convert To Hex = True Baud Rate = 4800 Parity = None Stop Bits = 2 Data Bits = 8 Power Option = None Polling = 500ms 73, Noel W2MSA
|
|
|