Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

On Oct 21, 2020, at 6:22 AM, Scott Davis via groups.io <SNKDavis@...> wrote:

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

Scott,

   I fired up the Logger and it did say that there was an update. I clicked on the update and it came back up with Ver .9 . So what do we do with this Logger? It is NOT part of list of Serial Numbers.

JoAnn - AB8YZ

On Wednesday, October 21, 2020, 2:42:25 PM CDT, Scott Davis via groups.io <snkdavis@...> wrote:

Awesome, thanks loads Dave!  :)

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Dave via groups.io <kc3am@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Oct 21, 2020 1:58 pm
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Worked great Scott.
Less than a minute and I was at 0.9 with yesterdays contacts.
Dave KC3AM

On 10/21/2020 06:22, Scott Davis via groups.io wrote:

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

--
Hams should be seen as well as heard, 73, Dave KC3AM

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install
Method & WW Digi Software! (I REALLY Need Your Help This Time)
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Wed, October 21, 2020 5:32 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi George,

It is specifically for the annual WW Digi Contest.

Enjoy!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Oct 21, 2020 4:23 pm
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Is this DIGI "plug-in"  only for an individual contest?  Or is it a multi mode digital engine??   More directly:  Does it do RTTY??

George K4GM

On 10/21/2020 4:03 PM, JoAnn Donaldson via groups.io wrote:

Scott,

   I fired up the Logger and it did say that there was an update. I clicked on the update and it came back up with Ver .9 . So what do we do with this Logger? It is NOT part of list of Serial Numbers.

JoAnn - AB8YZ

On Wednesday, October 21, 2020, 2:42:25 PM CDT, Scott Davis via groups.io <snkdavis@...> wrote:

Awesome, thanks loads Dave!  :)

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Dave via groups.io <kc3am@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Oct 21, 2020 1:58 pm
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Worked great Scott.
Less than a minute and I was at 0.9 with yesterdays contacts.
Dave KC3AM

On 10/21/2020 06:22, Scott Davis via groups.io wrote:

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

--
Hams should be seen as well as heard, 73, Dave KC3AM

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install
Method & WW Digi Software! (I REALLY Need Your Help This Time)
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Wed, October 21, 2020 6:49 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Here you go Bill:

https://ww-digi.com/

Enjoy!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Bill Grover <bgrover@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Oct 21, 2020 7:10 pm
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Does it go by another name?  I couldn't find it on WA7BNM's contest website.

Bill, N3EYF

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install
Method & WW Digi Software! (I REALLY Need Your Help This Time)
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Wed, October 21, 2020 5:32 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi George,

It is specifically for the annual WW Digi Contest.

Enjoy!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Oct 21, 2020 4:23 pm
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Is this DIGI "plug-in"  only for an individual contest?  Or is it a multi mode digital engine??   More directly:  Does it do RTTY??

George K4GM

On 10/21/2020 4:03 PM, JoAnn Donaldson via groups.io wrote:

Scott,

   I fired up the Logger and it did say that there was an update. I clicked on the update and it came back up with Ver .9 . So what do we do with this Logger? It is NOT part of list of Serial Numbers.

JoAnn - AB8YZ

On Wednesday, October 21, 2020, 2:42:25 PM CDT, Scott Davis via groups.io <snkdavis@...> wrote:

Awesome, thanks loads Dave!  :)

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Dave via groups.io <kc3am@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Oct 21, 2020 1:58 pm
Subject: Re: [N3FJPSoftwareUsers] Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Worked great Scott.
Less than a minute and I was at 0.9 with yesterdays contacts.
Dave KC3AM

On 10/21/2020 06:22, Scott Davis via groups.io wrote:

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!

Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott

N3FJP

http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

--
Hams should be seen as well as heard, 73, Dave KC3AM