Date
1 - 6 of 6
Inability to access DX Spotting on ACL.
Orville Burg, II
Scott, For some reason I am unable to access DX Spotting. Portions of the configuration screen are greyed out per the screenshot below. I tried upgrading from 6.5 to 6.6 and that had no effect. Any thoughts appreciated.
Orville, K5VWW
|
|
Scott Davis
Hi Orville,
Thanks for your e-mail. This FAQ will get you going:
http://www.n3fjp.com/faq.html#q95
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Orville Burg, II <orville@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Sun, Dec 15, 2019 10:39 am Subject: [N3FJPSoftwareUsers] Inability to access DX Spotting on ACL. Scott,
For some reason I am unable to access DX Spotting. Portions of the configuration screen are greyed out per the screenshot below. I tried upgrading from 6.5 to 6.6 and that had no effect.
Any thoughts appreciated.
Orville, K5VWW
|
|
Hi Orville,
Try a different host. I noticed that ve7cc was not working this
morning.
73 -- Larry -- W1DYJ
From: Orville Burg, II
Sent: Sunday, December 15, 2019 10:39
Subject: [N3FJPSoftwareUsers] Inability to access DX Spotting on
ACL. Scott, For some reason I am unable to access DX Spotting. Portions of the configuration screen are greyed out per the screenshot below. I tried upgrading from 6.5 to 6.6 and that had no effect. Any thoughts appreciated.
Orville, K5VWW
|
|
George Davenport
Same problem here...DXspots and Ve7cc...neither connect...
tested my telnet and it seems to be fine...
|
|
Lou Everett, Sr. <loueverettsr@...>
Choose a different DX Cluster host. VE7CC seems to be down.
On Sun, Dec 15, 2019 at 10:14 AM George Davenport <KM4ODS@...> wrote: Same problem here...DXspots and Ve7cc...neither connect... --
Lou WA5LOU
|
|
George Davenport
I tried both...neither worked, then suddenly everything is fine...guess both were down.
-- George-- KM4ODS
|
|