I go the same error at first, so I disabled Rig Control in WSJT and enabled it in the Contest Logger, and then all logged OK. Just had to remember to change the band in wsjt. Larry N8CWU Virus-free. w

#contest

Scott as always, good answer, had the Transmit > CW N3FJP API option selected. Thank You much Larry N8CWU

I have a computer that will not seem to work with JT Alert and the N3FJP ARRL Field Day Logger. It gives me the error from N3FJP Field Day Logger 6.3 that says This program's server is already running

Dave is this the 64 bit of 32 bit version, I cannot get it to work with ac log at all. Larry N8CWU

Good to know, I was hoping the new rigs would do it, It does same thing on the FT 1000D. According to the DX Atlas Group, it is because N3FJP requires sole access to the Comm port and it cannot be spi

Scott, This did not solve the problem for me, if you have any call other than the call assigned to the LOTW cert, iin the operator field, it will not upload. If you have it blank it will. Larry N8CWU

The way I have figured out how to get around this with the current software is to put the operator call sign in the initials box and the club call sign in the operator box. Larry N8CWU Virus-free. www

In the Rig setup try these settings Control-R Icom 7100 Rig Name = Icom Read Frequency Command = FE FE 88 E0 03 FD Read Mode Command = FE FE 88 E0 04 FD Convert To Hex = True Baud Rate = 19200 Parity

I have tried the below method and it works great as long as the connection is wired. When I use my laptop, the connection seems to be too slow when operating FT8 and FT4 and JTalert. To work around th

Check your filters in the DX Spotting page and make sure that one of the Block Spots under more filtering is not checked. Larry N8CWU

I got the following email from a fellow ham GE Larry, I noticed the following spots from you: N8CWU EA8DEG 7048.9 [AF-004] 0027z 30 Dec KM4LAO K8Y 7187 [LoTW] YOTA Month SES 0024z 30 Dec N8CWU 9Y4DG 7

in AC LOG GO TO Settings - Application Program Interface Select top box TCP API Enabled Do not check bottom box IN FLDIGI GO TO configure - Contest/Logging Select the LOG tab And check Connect box and

I found an editor, adif master, that allowed me to fix the adi file. Here are the errors I encountered using FLDIGI and N3FJP Logger in the contest. I posted this to the FLDIG site also. Not all cq zo

Scott, Almost every contact that FLDIGI logged was United States with no error, a few logged as USA . After making the CAB file I discovered that all entries that had United States were listed as DX i

Is there a contest log that can be used in this weekends WW-DIGI contest? Looks like the CW VHF log may work? Thanks, Larry N8CWU

Got to wsjt File, settings, reporting and uncheck the box that says db reports to comments. That worked for me. Larry N8CWU

Hi Scott, so far looks like it is working OK for me using Win 10 Larry N8CWU