Having the same problem Dale, in fact missing county most of the time and today lots of lockups, system just froze, don't understand what is going on Jeff NZ2S

I am running a laptop, i5 processor, 8GB of Ram, Windows 10, and it is continually losing the driver for ICOM, I am having to load it every time I turn on the computer, and go through the RIG setup ev

I meant to get back to everyone regarding my problem. It seems that Microsoft 10 does play nicely with the ICOM driver, in that every time Microsoft 10 does an update it kicks the ICOM driver off the

I guess the frustrating thing is that it all worked perfectly before even at 19.2 baud rate. I have tried the Icom2 selection even though I had it on Icom when it worked, but it behaves the same way.

I have double checked the baud rate, both are on 9.6k rig is set at 94h as you can see ACLog laso set there, still the same problem not talking. As was suggested recycled power on the rig, then checke

As requested Scott, here is the screen with the software set to follow rig

I originally had the baud rate at 19.2, everything was working. Updated and changed both the rig and ACLog to 9.6, after watching the video and reading suggestions on the baud rate. Still is not funct

Here is the data copied to the clipboard Rig Name = Icom Read Frequency Command = FE FE 94 E0 03 FD Read Mode Command = FE FE 94 E0 04 FD Convert To Hex = True Com Port Name = COM3 Baud Rate = 9600 Pa

I updated to ACL 6.7, now my rig (ICOM 7300) is not talking to the computer correctly. I have gone through rig interface the setup again and still it does not talk fully. When I do the interface test