Hi Roy, First, why don’t you all use the FD software. Also – you do not need a Cabrillo File. A Dupe Sheet is sufficient, which you can generate from ACLog. ACLog does not generate a Cabrillo as it is

Hi Tim, You can set up your two rigs, save the settings, and then switch between to two sets of settings using CNTRL-X. See the bottom left of the rig setup screen. 73

Thanks Scott – this change is good news for this year. Larry / W1DYJ

Hi Les, Not a stupid question at all. (Perhaps a stupid answer...) You may have to use CNTRL-SHIFT-R to stop the rig interface so that it doesn’t prefill some of the entries. Then just type in the dat

Hi Jim, You beat me to it. K2H/SU is not allowed by the FCC. Note that many other combinations are also not allowed but are used, such as W1xxx/M which indicates the ham is in England. This is one of

They must not be an EXACT match. 73

Correction – I should have said a stable connection from JTAlert to QRZ. Larry / W1DYJ

Hi Mark, Since ACLog gets it's data from QRZ, if you do not have a stable connection to QRZ the data will not be logged. Check to be sure you have QRZ set up properly. 73

Hi Mark, The best way to be sure is to upload them both ways. Then, no matter how they uploaded you would have it. 73

Hi Randy – the same command: Ctrl + Shift + R 73

Hi Jeff, Have you tried EDIT >> FILL FIELDS DETERMINED BY CALL? It will fill empty fields from your QRZ feed or from wherever you have selected. 73

Hi Jeff, You need to change the display to 100% – from what you say below you are not doing that. SETTINGS >> APPEARANCE >> FORM SIZE 73

Hi Bub, Use Cntrl-Shift-R to take ACLog out of rig control mode first, then do your search. 73 -- Larry -- W1DYJ

Hi all, I do a lot of contesting and load my logs to ACLog with the contest name in the Comments field. I then do a “Fill Fields” operation. Because the Comments field has info in it, QRZ doesn’t load

Sorry – hit send to quickly. Didn’t add my name/ call. 73

Hi Ranmid (call??), There have been many emails about this due to the new TQSL. Check to be sure you have your call sign is in the Operator field in your ACLog setup.

Hi Bill, (call?), Check your LoTW certificate date. ACLog does not use your date for this at all. 73

Hi Megan, Clicking on the “Worked” column will copy the list to your clipboard. Then just past it to whatever. 73

Hi tom, It’s probably not ACLog that is hanging. It’s probably the spotting cluster you are using. Open up the DX spotting window (Cntrl-D) and disable/enable spotting. Sometimes choosing a different

Hi Chuck, You don’t mention what contest you are in, but in general it’s much better and easier to use Scott’s contest software if one is available. When one isn't available for the few small contests