Date   

Re: Sat Ops - TX or RX Freq?

Jim Shorney
 

LoTW does not record frequency. Only band.

73

-Jim
NU0C

On Fri, 4 Dec 2020 14:59:54 -0500
"Archibald Delfish via groups.io" <plentipeppa=icloud.com@groups.io> wrote:

You can log all you Satellite Contacts direct in Tqsl then if you want re-import them into AC log.
I enter both TX and RX frequencies.

73 de N2NWK






Re: Sat Ops - TX or RX Freq?

Archibald Delfish
 

You can log all you Satellite Contacts direct in Tqsl then if you want re-import them into AC log.
I enter both TX and RX frequencies.

73 de N2NWK 


FT8/FT4 Contest

Robert Crossland
 

Good afternoon!
New to the group here.  Thanks in advance for your suggestions and guidance.
I'm confident this has been previously addressed, but I'm wondering, what is the best way to use N3FJP for this weekend's FT8/FT4 Contest?
Thanks again.
Bob, N3FR


Re: Sat Ops - TX or RX Freq?

Frank MacKenzie-Lamb
 

Always the TX frequency….and I have a separate ACLog just for satellites

 

Frank

NG1I

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Ron Pogue
Sent: Friday, December 4, 2020 2:16 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Sat Ops - TX or RX Freq?

 

When using ACLog  for Sat contacts do you log the TX Freq and TX Mode or the RX Freq and RX Mode?  I want to be able to have ACLog upload to LOTW and have them posted correctly and accepted.

 

Thanks,

 

K9RMP


Sat Ops - TX or RX Freq?

Ron Pogue
 

When using ACLog  for Sat contacts do you log the TX Freq and TX Mode or the RX Freq and RX Mode?  I want to be able to have ACLog upload to LOTW and have them posted correctly and accepted.

 

Thanks,

 

K9RMP


Re: Question for Scott

Jim Shorney
 

Right-click > Save Link As... works too.

73

-Jim
NU0C

On Fri, 04 Dec 2020 10:42:35 -0800
"W5DET" <w5det@arrl.net> wrote:

I know in my browsers, *Firefox ( https://www.mozilla.org/en-US/firefox/ )* and *Vivaldi ( https://vivaldi.com )* , if I select SAVE AS I can alter the filename before downloading instead of looking for it after to rename it.  In order to work in this manner, in your browser options, DESELECT Download to Default File Location. EZPZ.


Re: Question for Scott

W5DET
 

I plowed this same ground with Scott some 10 years ago with equal success (lack of).  Scott has his own configuration control system  It works for him.  We don't get to change it.
However, I know in my browsers, Firefox and Vivaldi, if I select SAVE AS I can alter the filename before downloading instead of looking for it after to rename it.  In order to work in this manner, in your browser options, DESELECT Download to Default File Location. EZPZ.

73, Doug Thompson, W5DET
p.s.  I no longer use Windoze, but this is how I operated with XP and Win7 when I did.


Re: Question for Scott

Jim Shorney
 

I consider myself to be generally lazy but I don't see a couple of mouse clicks as a burden if you are already looking at the file anyway. Better than putting extra work on the developers for a solution in search of a problem IMO.

73

-Jim
NU0C

On Fri, 4 Dec 2020 10:46:06 -0600
"Kevin Gray" <n9vpv@arrl.net> wrote:

Extra un-necessary steps Jim.
While the solution does work, it would be completely not needed, if the file "Name" said it all.
Life is short, Time is valuable

I wont reply to this tread again.
It is completely up to Scott what he chooses to do

-----Original Message-----
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On
Behalf Of Jim Shorney
Sent: Friday, December 4, 2020 10:02 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Question for Scott


Right-click on the file and select Properties. Easy-peasy.

73

-Jim
NU0C


Re: Hot ey to exit app

Scott Davis
 

Hi Guys,

The backup function fires regardless of the method you use to close the software.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John AJ1R <JRoe43@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 11:45 am
Subject: Re: [N3FJPSoftwareUsers] Hot ey to exit app

Pat Whelton  KZ5J

I just noticed your reply
The problem with your simple solution I believe is
If you have the "auto backup on exit" option enabled
then I do not think you get a backup made
I assume this why Scott said he would make the change I suggested at some point


Re: Question for Scott

Larry Banks
 

Part of every ham's pre-contest checklist (you all do have one, right?) is to install the latest sw.

Larry / W1DYJ

-----Original Message-----
From: Jim Shorney
Sent: Friday, December 04, 2020 11:10
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Question for Scott


On Fri, 4 Dec 2020 10:24:20 -0500
"Larry Banks via groups.io" <larryb.w1dyj=verizon.net@groups.io> wrote:

I resolve this issue by naming the folder with the version. For instance, my folder for tonight’s contest is:

C:/hamprograms/N3FJP Software/ARRL 160-48

This is another brilliant solution. An organized folder tree is a wonderful thing.

For me it is a three step process. Check my current program version under Help > About; check the latest version on the web site; download new version if necessary.

Or if it is a contest program: IF (day before contest) = YES THEN (download new version). There are always updates.

73

-Jim
NU0C


Re: Question for Scott

Kevin Gray
 

Extra un-necessary steps Jim.
While the solution does work, it would be completely not needed, if the file "Name" said it all.
Life is short, Time is valuable

I wont reply to this tread again.
It is completely up to Scott what he chooses to do

-----Original Message-----
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On
Behalf Of Jim Shorney
Sent: Friday, December 4, 2020 10:02 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Question for Scott


Right-click on the file and select Properties. Easy-peasy.

73

-Jim
NU0C


On Fri, 4 Dec 2020 09:12:46 -0600
"Kevin Gray" <n9vpv@arrl.net> wrote:

If I download the installer for ACLog, I usually end up with this.



Any Idea which one is which ? Me either, unless I re-name them after
download. This make it more difficult to keep archived versions in case the
“New” one doesn’t work.




Re: Hot ey to exit app

John AJ1R
 

Pat Whelton  KZ5J

I just noticed your reply
The problem with your simple solution I believe is
If you have the "auto backup on exit" option enabled
then I do not think you get a backup made
I assume this why Scott said he would make the change I suggested at some point


Re: Question for Scott

Jim Shorney
 

On Fri, 4 Dec 2020 10:24:20 -0500
"Larry Banks via groups.io" <larryb.w1dyj=verizon.net@groups.io> wrote:

I resolve this issue by naming the folder with the version. For instance, my folder for tonight’s contest is:

C:/hamprograms/N3FJP Software/ARRL 160-48

This is another brilliant solution. An organized folder tree is a wonderful thing.

For me it is a three step process. Check my current program version under Help > About; check the latest version on the web site; download new version if necessary.

Or if it is a contest program: IF (day before contest) = YES THEN (download new version). There are always updates.

73

-Jim
NU0C


Re: Question about synced data from LoTW and the Overwrite Existing Data option

Scott Davis
 

Hi Paul,

Thanks for your follow up.  Any time a QSO is found in your log and marked as confirmed, the Updated text occurs, even if the QSO was already marked in a previous download.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Paul AC9O <pphiliphome@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 8:12 am
Subject: Re: [N3FJPSoftwareUsers] Question about synced data from LoTW and the Overwrite Existing Data option

Thanks for the information. It's helpful to fully understand what may happen.

I have done some experimenting, checking the box and not back dating. Now, each time I download, it says Update or Updated and Confirmed on all QSO/QSL every time. I checked the data on LoTW and it appears those fields match in both places. Why would it say "Updated" when there's nothing to update?

73
Paul, AC9O


Re: Question for Scott

Jim Shorney
 

Right-click on the file and select Properties. Easy-peasy.

73

-Jim
NU0C


On Fri, 4 Dec 2020 09:12:46 -0600
"Kevin Gray" <n9vpv@arrl.net> wrote:

If I download the installer for ACLog, I usually end up with this.



Any Idea which one is which ? Me either, unless I re-name them after download. This make it more difficult to keep archived versions in case the “New” one doesn’t work.


Re: Question for Scott

Jim Shorney
 

And the version of your previously downloaded files can be found in the file Properties > Details.

73

-Jim
NU0C

On Fri, 4 Dec 2020 12:13:32 +0000 (UTC)
"Scott Davis via groups.io" <SNKDavis=aol.com@groups.io> wrote:

Hi George,
Thanks for your e-mail.  The easiest approach is to join my Announcement Only e-mail group, so you are alerted to all new releases (as you are here as well).
https://groups.io/g/N3FJPSoftware

Even without that, there is no need to download the software to check the current version.  The current version is already displayed at the top of each download page:

As well as on the complete list of all programs here:
http://www.n3fjp.com/purchasepackage.html



Finally, you will find the version number along with each program's revision summary:

Enjoy!

73, ScottN3FJPhttp://www.n3fjp.com
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: WB5JJJ - George <wb5jjj@gmail.com>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 12:04 am
Subject: [N3FJPSoftwareUsers] Question for Scott

Scott:

I spend a lot of time checking your site for the latest versions only to find out that I already have that file on my NAS.  Lately, I've been adding the version number to these files myself to save the download.  I don't usually keep all the programs installed on my computer at once.  

Can I ask if you can put the version number along with the file name, so I can compare what I have with what is on your site without having to install/run the program?  

Thanks.


Re: Question for Scott

Larry Banks
 

Hi George,
 
I resolve this issue by naming the folder with the version.  For instance, my folder for tonight’s contest is:
 
C:/hamprograms/N3FJP Software/ARRL 160-48
 
I do keep all of the software on my SSD, and change the file name to the new version when I upgrade.   If you don’t want to keep the software, you could still leave the folder there so you would know what the version is.

73 -- Larry -- W1DYJ

 

Sent: Friday, December 04, 2020 0:04
Subject: [N3FJPSoftwareUsers] Question for Scott
 
Scott:

I spend a lot of time checking your site for the latest versions only to find out that I already have that file on my NAS.  Lately, I've been adding the version number to these files myself to save the download.  I don't usually keep all the programs installed on my computer at once. 

Can I ask if you can put the version number along with the file name, so I can compare what I have with what is on your site without having to install/run the program? 

Thanks.
--
73's
George - WB5JJJ
Hamshack Holine #4969


Re: Question for Scott

Kevin Gray
 

I tend to agree with George, and Steve.

 

If I download the installer for ACLog, I usually end up with this.

Any Idea which one is which ? Me either, unless I re-name them after download. This make it more difficult to keep archived versions in case the “New” one doesn’t work.

 

My approach so far has been to change the names after download to keep things straight, that way I always have the option to see exactly what I do have, without taking the time to re-download.

 

 

Your milage and disk space may vary, but this has been my approach.

 

73 Kevin, N9VPV

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Friday, December 4, 2020 8:47 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Question for Scott

 

Hi Steve,

 

Thanks for your follow up and clarification.  Sorry, no, that isn't in the cards, but don't worry, after the next release, all the programs will check for a later version automatically on start up.

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 9:02 am
Subject: Re: [N3FJPSoftwareUsers] Question for Scott

Scott,

I think what George is asking for (and I do the same thing) would be to include the version in the filename (for example ACLog6.7, FIELDDAY6.2). Don't know how much extra work that would be.

That makes it a simple task to compare the downloaded version with that listed on the website as I don't always download a new version if the contest is still some time away, but always check right before I get set up for it.

Steve, AI3KS

On 20/12/04 07:13, Scott Davis via groups.io wrote:

Hi George,

 

Thanks for your e-mail.  The easiest approach is to join my Announcement Only e-mail group, so you are alerted to all new releases (as you are here as well).

 

 

Even without that, there is no need to download the software to check the current version.  The current version is already displayed at the top of each download page:

 

 

As well as on the complete list of all programs here:

 

 

 

 

Finally, you will find the version number along with each program's revision summary:

 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: WB5JJJ - George <wb5jjj@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 12:04 am
Subject: [N3FJPSoftwareUsers] Question for Scott

Scott:

I spend a lot of time checking your site for the latest versions only to find out that I already have that file on my NAS.  Lately, I've been adding the version number to these files myself to save the download.  I don't usually keep all the programs installed on my computer at once.  

Can I ask if you can put the version number along with the file name, so I can compare what I have with what is on your site without having to install/run the program?  

Thanks. 
--
73's
George - WB5JJJ
Hamshack Holine #4969

 


Re: Question for Scott

AI3KS
 

Even Better!

Thanks Scott.

Steve AI3KS

On 20/12/04 09:47, Scott Davis via groups.io wrote:
Hi Steve,

Thanks for your follow up and clarification.  Sorry, no, that isn't in the cards, but don't worry, after the next release, all the programs will check for a later version automatically on start up.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 9:02 am
Subject: Re: [N3FJPSoftwareUsers] Question for Scott

Scott,

I think what George is asking for (and I do the same thing) would be to include the version in the filename (for example ACLog6.7, FIELDDAY6.2). Don't know how much extra work that would be.

That makes it a simple task to compare the downloaded version with that listed on the website as I don't always download a new version if the contest is still some time away, but always check right before I get set up for it.

Steve, AI3KS

On 20/12/04 07:13, Scott Davis via groups.io wrote:
Hi George,

Thanks for your e-mail.  The easiest approach is to join my Announcement Only e-mail group, so you are alerted to all new releases (as you are here as well).


Even without that, there is no need to download the software to check the current version.  The current version is already displayed at the top of each download page:

Capture.JPG

As well as on the complete list of all programs here:


Capture2.JPG


Finally, you will find the version number along with each program's revision summary:

Capture3.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: WB5JJJ - George <wb5jjj@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 12:04 am
Subject: [N3FJPSoftwareUsers] Question for Scott

Scott:

I spend a lot of time checking your site for the latest versions only to find out that I already have that file on my NAS.  Lately, I've been adding the version number to these files myself to save the download.  I don't usually keep all the programs installed on my computer at once.  

Can I ask if you can put the version number along with the file name, so I can compare what I have with what is on your site without having to install/run the program?  

Thanks. 
--
73's
George - WB5JJJ
Hamshack Holine #4969



Re: Question for Scott

Scott Davis
 

Hi Steve,

Thanks for your follow up and clarification.  Sorry, no, that isn't in the cards, but don't worry, after the next release, all the programs will check for a later version automatically on start up.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 9:02 am
Subject: Re: [N3FJPSoftwareUsers] Question for Scott

Scott,

I think what George is asking for (and I do the same thing) would be to include the version in the filename (for example ACLog6.7, FIELDDAY6.2). Don't know how much extra work that would be.

That makes it a simple task to compare the downloaded version with that listed on the website as I don't always download a new version if the contest is still some time away, but always check right before I get set up for it.

Steve, AI3KS

On 20/12/04 07:13, Scott Davis via groups.io wrote:
Hi George,

Thanks for your e-mail.  The easiest approach is to join my Announcement Only e-mail group, so you are alerted to all new releases (as you are here as well).


Even without that, there is no need to download the software to check the current version.  The current version is already displayed at the top of each download page:

Capture.JPG

As well as on the complete list of all programs here:


Capture2.JPG


Finally, you will find the version number along with each program's revision summary:

Capture3.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: WB5JJJ - George <wb5jjj@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Dec 4, 2020 12:04 am
Subject: [N3FJPSoftwareUsers] Question for Scott

Scott:

I spend a lot of time checking your site for the latest versions only to find out that I already have that file on my NAS.  Lately, I've been adding the version number to these files myself to save the download.  I don't usually keep all the programs installed on my computer at once.  

Can I ask if you can put the version number along with the file name, so I can compare what I have with what is on your site without having to install/run the program?  

Thanks. 
--
73's
George - WB5JJJ
Hamshack Holine #4969

1721 - 1740 of 46932