Date   

Re: Starting a new thread

David
 

If you are logged in to groups.io, select new topic on left column. it will open a email to send.
David
ka4kkf


Re: Rig interface

Scott Davis
 

Hi Stephen,

Thanks for your follow up.  I am sorry that you are still having trouble.  The Convert to Hes is here, and disabled and unchecked by default with the Yaesu Newer selection:

Capture.JPG


I've had good reports on the 950, so I am sure the software is fine.  I don't have any Yaesu equipment myself, but hopefully someone more familiar with your specific rig will have additional insights for you.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: kc6mie <kc6mie@...>
To: 'N3FJPSoftwareUsers@groups.io' <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Nov 10, 2019 8:23 pm
Subject: Re: [N3FJPSoftwareUsers] Rig interface

I'm a little confused by where to post my questions to the group.  I went to the group site and could not find anything that said post new or post anything.  I did follow the recommended settings for the FT-950 as well as setting up my FT-991 with no results.  Can you tell me what "convert to Hex = False" is or what setting that can be found if it is a setting?
Thanks,
Stephen

-----------------------------------------
From: "Scott Davis via Groups.Io"
To: N3FJPSoftwareUsers@groups.io
Cc:
Sent: Sunday November 10 2019 1:28:39PM
Subject: Re: [N3FJPSoftwareUsers] Rig interface

Hi Stephen,

Thanks for your e-mail.  In the rig interface form, try setting the power option to None (depending on your interface hardware, you may not need power, or it may be the other option).   That should remedy the rig keying when you click Test.

I don't have any Yaesu equipment here myself, but you will find the successful settings other 950 users have sent along here:


Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: kc6mie <kc6mie@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Nov 10, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Rig interface

I’m a new user and trying to set up my Ft-950 win the interface.
I can key up the rig with polling but no freq. is displays.
Rig keys up every time I open up AC log.  I have to go to settings to end the polling.
Thanks
Stephen Kc6mie

Stephen Spencer



Re: Rig interface

kc6mie
 

Tried all combinations, without good results.  


Re: Rig interface

Kevin Gray <notsome1else@...>
 

When you receive email from the group, there is usually additional text at the bottom of each email. Scroll down to where it says “Groups.io links:” and click the appropriate link. (ie. New Topic)

 

73 Kevin,, N9VPV

[snip] (see below)


Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#38802) | Reply To Group | Reply To Sender | Mute This Topic | New Topic


This user group is a great forum for asking questions and sharing ideas with the valuable resource of both new and experienced N3FJP Software users, but it does get busy. There is an easy way to cut down on the e-mail volume.

[end snip]

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of kc6mie
Sent: Sunday, November 10, 2019 7:23 PM
To: 'N3FJPSoftwareUsers@groups.io' <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Rig interface

 

I'm a little confused by where to post my questions to the group.  I went to the group site and could not find anything that said post new or post anything.  I did follow the recommended settings for the FT-950 as well as setting up my FT-991 with no results.  Can you tell me what "convert to Hex = False" is or what setting that can be found if it is a setting?

Thanks,

Stephen

-----------------------------------------

From: "Scott Davis via Groups.Io"
To: N3FJPSoftwareUsers@groups.io
Cc:
Sent: Sunday November 10 2019 1:28:39PM
Subject: Re: [N3FJPSoftwareUsers] Rig interface

Hi Stephen,

 

Thanks for your e-mail.  In the rig interface form, try setting the power option to None (depending on your interface hardware, you may not need power, or it may be the other option).   That should remedy the rig keying when you click Test.

 

I don't have any Yaesu equipment here myself, but you will find the successful settings other 950 users have sent along here:

 

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: kc6mie <kc6mie@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Nov 10, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Rig interface

I’m a new user and trying to set up my Ft-950 win the interface.

I can key up the rig with polling but no freq. is displays.

Rig keys up every time I open up AC log.  I have to go to settings to end the polling.

Thanks

Stephen Kc6mie

 

Stephen Spencer

 

 


Starting a new thread

Michael WA7SKG
 

To start a new thread, simply send an email to N3FJPSoftwareUsers@groups.io

This must be a new message with a new Subject line. Do not reply to an older message with a new topic. It fouls up the thread tracking.

Michael WA7SKG


kc6mie wrote on 11/10/19 5:23 PM:

I'm a little confused by where to post my questions to the group. I
went to the group site and could not find anything that said post new or
post anything. I did follow the recommended settings for the FT-950 as
well as setting up my FT-991 with no results. Can you tell me what
"convert to Hex = False" is or what setting that can be found if it is a
setting?

Thanks,

Stephen


Re: Rig interface

kc6mie
 

I'm a little confused by where to post my questions to the group.  I went to the group site and could not find anything that said post new or post anything.  I did follow the recommended settings for the FT-950 as well as setting up my FT-991 with no results.  Can you tell me what "convert to Hex = False" is or what setting that can be found if it is a setting?

Thanks,

Stephen

-----------------------------------------

From: "Scott Davis via Groups.Io"
To: N3FJPSoftwareUsers@groups.io
Cc:
Sent: Sunday November 10 2019 1:28:39PM
Subject: Re: [N3FJPSoftwareUsers] Rig interface

Hi Stephen,

Thanks for your e-mail.  In the rig interface form, try setting the power option to None (depending on your interface hardware, you may not need power, or it may be the other option).   That should remedy the rig keying when you click Test.

I don't have any Yaesu equipment here myself, but you will find the successful settings other 950 users have sent along here:


Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: kc6mie <kc6mie@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Nov 10, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Rig interface

I’m a new user and trying to set up my Ft-950 win the interface.
I can key up the rig with polling but no freq. is displays.
Rig keys up every time I open up AC log.  I have to go to settings to end the polling.
Thanks
Stephen Kc6mie

Stephen Spencer



Re: ACLog and Fldigi

Dan Morris
 

Greg - Well, nobody has answered my query but I googled N3FJP AClog and flidig using API and found something about it.    I brought up both programs and went in to the configuration of fldigi and made sure everything was as in the tutorial and it was. tried it and it actually did connect to ACLog.   So, it is working okay.

Reason I was asking is my PSK ExpressSE digital program by N7YG, Jeff went bonkers on me when I uninstalled another program so I was in a quandry to get something running so I brought up fldigi (my backup)  — I like the program but I just wish there was a data field specifically for the 10-10 and VP numbers and there isn’t and not a good way to get all that info over in to ACLog.

But I did finally get my PSK ExpressSE working again. Just had to reinstall the program and it is working okay now but I will continue to use fldigi occasionally  though.  I got most of all the macros set up in fldigi so I’m ready to go if need be.

Hope this helps.

Dan Morris  KZ3T

I live to live for Him!



On Nov 9, 2019, at 10:41 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Dan

When you find out let me k ow tp please


Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/9/19 12:16 PM (GMT-05:00)
Subject: [N3FJPSoftwareUsers] ACLog and Fldigi

Anyone use fldigi to connect to AClog pls contact me off list directly. I am trying to connect the two programs but does not seem to be working so obviously I’m doing something wrong. Thanks

Dan Morris  KZ3T
dbmorris315@...

I live to live for Him!








Re: Rig interface

Scott Davis
 

Hi Stephen,

Thanks for your e-mail.  In the rig interface form, try setting the power option to None (depending on your interface hardware, you may not need power, or it may be the other option).   That should remedy the rig keying when you click Test.

I don't have any Yaesu equipment here myself, but you will find the successful settings other 950 users have sent along here:


Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: kc6mie <kc6mie@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Nov 10, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Rig interface

I’m a new user and trying to set up my Ft-950 win the interface.
I can key up the rig with polling but no freq. is displays.
Rig keys up every time I open up AC log.  I have to go to settings to end the polling.
Thanks
Stephen Kc6mie

Stephen Spencer



Rig interface

kc6mie
 

I’m a new user and trying to set up my Ft-950 win the interface.
I can key up the rig with polling but no freq. is displays.
Rig keys up every time I open up AC log. I have to go to settings to end the polling.
Thanks
Stephen Kc6mie

Stephen Spencer


Re: WAE & QTC's?

Gary Darnell <wb0rur@...>
 

Thanks, I really like RTTY but don't work very much of it.   I've managed to send QTCs, but how do I get the incoming received QTC info into the QTC receive fields?    


Re: WAE & QTC's?

Charlie Anderson <charlie12-21@...>
 

Hi Gary, from the QTC box it will save itself and show in your contest log. Go get em!


On Nov 10, 2019, at 7:47 AM, Gary Darnell <wb0rur@...> wrote:

Hello all - working some WAE and finally got a request for QTCs.  I can't find any info about how to use the software to "save" that info.  If there's any help - online or otherwise - I'd sure appreciate it.   73 Gary


Re: WAE & QTC's?

Gary Darnell <wb0rur@...>
 

Hello all - working some WAE and finally got a request for QTCs.  I can't find any info about how to use the software to "save" that info.  If there's any help - online or otherwise - I'd sure appreciate it.   73 Gary


Re: ACLog and Fldigi

Larry Krist
 

in AC LOG GO TO

Settings - Application Program Interface

Select top box TCP API Enabled

Do not check bottom box

IN FLDIGI

GO TO  configure - Contest/Logging

Select the  LOG tab

And check Connect box  and enable data stream minimum, I have the other
two checked but you will have to experiment as to what works for you.

It works fine for me here on several different rigs

Make sure both programs have same port number also

Good Luck

Larry - N8CWU

On 11/9/2019 12:16 PM, Dan Morris wrote:
Anyone use fldigi to connect to AClog pls contact me off list directly. I am trying to connect the two programs but does not seem to be working so obviously I’m doing something wrong. Thanks

Dan Morris KZ3T
dbmorris315@...

I live to live for Him!






Re: ACLog and Fldigi

wa3gm
 

Dan

When you find out let me k ow tp please


Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/9/19 12:16 PM (GMT-05:00)
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] ACLog and Fldigi

Anyone use fldigi to connect to AClog pls contact me off list directly. I am trying to connect the two programs but does not seem to be working so obviously I’m doing something wrong. Thanks

Dan Morris  KZ3T
dbmorris315@...

I live to live for Him!







ACLog and Fldigi

Dan Morris
 

Anyone use fldigi to connect to AClog pls contact me off list directly. I am trying to connect the two programs but does not seem to be working so obviously I’m doing something wrong. Thanks

Dan Morris KZ3T
dbmorris315@...

I live to live for Him!


Re: Yaesu 101D, 101MP and 991 Users, Please Test!

Scott Davis
 

Awesome, thanks for the good report Greg!  :)

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Greg Leber <Greg7412@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Nov 8, 2019 8:18 pm
Subject: Re: [N3FJPSoftwareUsers] Yaesu 101D, 101MP and 991 Users, Please Test!

Scott,
Works good with my FTDX101D


Re: Yaesu 101D, 101MP and 991 Users, Please Test!

Greg Leber
 

Scott,
Works good with my FTDX101D


Re: ACLog controls rig's "Voice Memory"

Gary Darnell <wb0rur@...>
 

Yes, that's correct. Was just looking for a couple of examples of the strings being used for the FTdx3000.   


Re: ACLog controls rig's "Voice Memory"

Wilbur Doolittle
 

I think you are referring to the ones under settings.transimit options under cw or phone.
ab8wd

On Fri, Nov 8, 2019 at 1:50 PM Gary Darnell <wb0rur@...> wrote:
I love the idea of being able to control a few things (as mentioned on this thread) with F keys.  Any ideas on where I can find these strings?  I can't seem to locate them anwhere. 
73, Gary
WB0RUR


Re: ACLog controls rig's "Voice Memory"

Gary Darnell <wb0rur@...>
 

Hi Scott - Yaesu FTdx3000.   Thanks for the fast reply!