Date   

HPM150 and Busted Calls

Bob Wilson
 

In the heat of running, I typo'd two calls - one I logged as /1150 and the other as /250. After correcting my typos the score didn't change (a /150 should be 2 points). How do I fix this? I have a licensed copy of MS Access if that helps.

73, Bob N4XU


Re: shift-cntl-g

Scott Davis
 

Hi Bill,

Thanks for the report.  You haven't overlooked anything, the error is mine.  With the HPM software, enter will send the F3 CW string as usual, but tab does not send the F2 CW string.  

This is one of the reasons I am extremely reluctant to attempt to support a new contest with a tight time notification window.  There are just too many things that can fall through the cracks.

Thanks again for the report.  If ARRL decides to make this an annual event, it's all corrected for next time.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bill DeVore <maxrcul@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Sep 2, 2019 1:06 pm
Subject: [N3FJPSoftwareUsers] shift-cntl-g

I really like  the shift-ctrl-g feature found in most of Scott's contesting software. However it doesn't seem to work with the Hiram Percy Contest Log 1.0 I'm sure I'm overlooking something simple.

Bill - W3PNM


Re: ACL and LoTW

Ken Gunther
 

   Thank you Scott, this was simply operator error (PEBKAC) on my part. When downloading data from LoTW I always selected "Download confirmed since..." instead of "Download all since ..." meaning that unconfirmed QSOs never got marked as uploaded and I would always try to upload them again. Your help video on LoTW helped solve my problem.

                                                Have a great Labor Day,
                                                Ken WB2KWC

On 8/28/2019 14:09, Scott Davis via Groups.Io wrote:
Hi Ken,

Thanks for your e-mail.  TQSL performs the actual upload, not AC Log.  This FAQ will get you going:



Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Ken Gunther <Yahoo_groups@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Aug 28, 2019 1:58 pm
Subject: [N3FJPSoftwareUsers] ACL and LoTW

    I have observed some puzzling behavior when trying to upload from
Amateur Contact Log to LoTW. I select eLogs/LoTW/upload contacts not
already uploaded. TQSL is started and I supply my certificate password
and the QSOs are uploaded. During the next hour or so I will work
another 6 stations. Once again I will select eLogs/LoTW/upload contacts
not already uploaded. TQSL will warn me that I am trying to upload 30
duplicate contacts and 6 new contacts. I will be presented 3 buttons
asking me what to do. I can upload duplicate contacts, I can only upload
the new contacts or cancel and not upload anything.

    Why is ACL attempting to upload contacts that have already been
uploaded?


                                        Ken WB2KWC



_._,_._,_




shift-cntl-g

Bill DeVore
 

I really like  the shift-ctrl-g feature found in most of Scott's contesting software. However it doesn't seem to work with the Hiram Percy Contest Log 1.0 I'm sure I'm overlooking something simple.

Bill - W3PNM


Re: HPMaxim issue with FLDigi

Scott Davis
 

Hi Guys,

I just heard from Dave, W1HKJ, the author of FLDigi on this. Dave writes:

"Fldigi was not modified to support HPM/N3FJP logger.  Simply too much work for a one-off event."

I totally understand.  There is a lot more going on under the hood than anyone who hasn't peaked below can fully appreciate.  I am very thankful for all the N3FJP Software Dave does support.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Andy Pungratz <andy32@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Sep 1, 2019 10:47 pm
Subject: Re: [N3FJPSoftwareUsers] HPMaxim issue with FLDigi

Just FYI, I am having the same issue with N3FJP HPM + Fldigi with N3FJP as rig control as Lee is having.  I tried with other N3FJP Contest software and don't have any problems, but with the HPM program it looks like everything is communicating but not confirmed (the "Connected" diamond is not lighting up).  Lee did post the the Fldigi group, but still waiting for a reply.

Thanks,

Andy


Re: Hiram P. Maxim Celebration Now Underway!

Bob Wilson
 

Hey Jack! The league hasn't published any suggested operating frequencies that I'm aware of. It probably would have been a good idea, but maybe they were afraid that some obscure net would complain they were advocating people QRM them. Yesterday I worked a Canadian multiplier way up on 14.340! About the only place I haven't heard HPM activity is in the Extra-class cw sub-band. I've had good luck operating in the General portion.

73, Bob N4XU (ex:WA1IZS)


Re: HPMaxim issue with FLDigi

Jim Shorney
 

I would say ditch the rig control. Run the radio manually and start making contacts!

73

-Jim
NU0C

On Sun, 01 Sep 2019 19:46:56 -0700
"Andy Pungratz" <andy32@...> wrote:

Just FYI, I am having the same issue with N3FJP HPM + Fldigi with N3FJP as rig control as Lee is having.  I tried with other N3FJP Contest software and don't have any problems, but with the HPM program it looks like everything is communicating but not confirmed (the "Connected" diamond is not lighting up).  Lee did post the the Fldigi group, but still waiting for a reply.

Thanks,

Andy



Re: HPMaxim issue with FLDigi

Andy Pungratz
 

Just FYI, I am having the same issue with N3FJP HPM + Fldigi with N3FJP as rig control as Lee is having.  I tried with other N3FJP Contest software and don't have any problems, but with the HPM program it looks like everything is communicating but not confirmed (the "Connected" diamond is not lighting up).  Lee did post the the Fldigi group, but still waiting for a reply.

Thanks,

Andy


Re: Hiram P. Maxim Celebration Now Underway!

Jack Sheehy
 

Does anybody know of any specific suggested operating frequencies?

Thanks & 73,
Jack
W1JS


Re: Request: additional display of DX info

Scott Davis
 

Hi Dave,

Thanks for your e-mail.  I will give that some thought for the future.  

You can always click View > Country List and then click the header to sort by country and see all the prefixes and other info for that country.

Thanks again!

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave <k4em@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Sep 1, 2019 8:45 am
Subject: [N3FJPSoftwareUsers] Request: additional display of DX info

When I select a Country from the pull down menu and then click on Country name. I get a nice summary of  DX for that country. But I would also like to know the PREFIX of that Country in that Window. Could you add the PREFIX just to the right of the Country name at the top of the window? Maybe Short/Long path too? I'm trying minimize keystrokes and I think those two additions would help us Dxer's.
Dave
k4em


Request: additional display of DX info

Dave
 

When I select a Country from the pull down menu and then click on Country name. I get a nice summary of  DX for that country. But I would also like to know the PREFIX of that Country in that Window. Could you add the PREFIX just to the right of the Country name at the top of the window? Maybe Short/Long path too? I'm trying minimize keystrokes and I think those two additions would help us Dxer's.
Dave
k4em


Hiram P. Maxim Celebration Now Underway!

Scott Davis
 

Hi All,

Just a reminder that the Hiram P. Maxim Celebration is now underway and runs for the next 9 days!  The rules are here:


And the software is here:


This program is completely free, so please be sure to tell your friends to give it a try!

I hope to work you during the event!

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


Re: Contest Log

Scott Davis
 

Hi Larry,

Thanks for your e-mail.  With all the other commitments I already have on my plate, the World Wide Digi Contest sponsors didn't announce their contest with sufficient lead time for me to support their 2019 event. Lord willing, I do plan to support it next year.

I'd like to operate X contest. The exchange is X. Which program should I use?

http://www.n3fjp.com/faq.html#q73

I'm sorry that I didn't have the answer you were looking for.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Krist <larrykrist@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Aug 30, 2019 9:39 pm
Subject: [N3FJPSoftwareUsers] Contest Log

Is there a contest log that can be used in this weekends WW-DIGI
contest? Looks like the CW  VHF log may work?

Thanks,

Larry  N8CWU





Re: HPMaxim issue with FLDigi

Scott Davis
 

Hi Lee,

Thanks for your e-mail.  I'm sorry that you have run into trouble.  I'd love to help, but I am by no means an FLDigi guru, so please post your question here:

https://groups.io/g/winfldigi/

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Lee Glassman via Groups.Io <leemanpa@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Aug 30, 2019 6:56 pm
Subject: [N3FJPSoftwareUsers] HPMaxim issue with FLDigi

Probably should have tested this b4, but.. Anyway, I open the FJP HPM Log, set it up correctly, API server on. Start FLDigi, choose n3fjp logging, click connect. Yellow diamodn does not light, but this is in data stream:

RCVD:
<CMD><PROGRAMRESPONSE><PGM>N3FJP's Hiram P. Maxim Contest Log</PGM><VER>1.0</VER><APIVER>1.5</APIVER></CMD><crlf>
SEND:
<CMD><PROGRAM></CMD>SEND:
<CMD><PROGRAM></CMD>RCVD

Over and over again. When I try to choose the contest in FLDigi, I pull down the menu, choose a contest, and it stays there for a second then reverts back to NO CONTEST. When I do an exchange and <LOG>, it logs to the FLDigi log, but not to N3FJP.

What am I missing here? Sorry I waited so long, Scott...


Re: Comment section of ACLog

wa3gm
 

Tnx larry

Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone

-------- Original message --------
From: Larry Krist <larrykrist@...>
Date: 8/30/19 9:21 PM (GMT-05:00)
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog

Got to wsjt File, settings, reporting and uncheck the box that says db reports to comments. That worked for me.

Larry  N8CWU

On 8/30/2019 8:04 AM, wa3gm via Groups.Io wrote:
Hi Scott

When using JT Alert the comments section of AC Log puts in the signal report of the qso  Instead of the name and address of the person.....

How do I get it to go back to putting the name and address and and not the both signal reports.


Thanks
Greg wa3gm 


Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone

-------- Original message --------
From: "Scott Davis via Groups.Io" <SNKDavis@...>
Date: 8/24/19 1:32 PM (GMT-05:00)
Subject: Re: [N3FJPSoftwareUsers] Display Frequency

Hi Bill,

Thanks for your e-mail.  Press Ctrl + Shift + F.  More details are here:



Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bill DeVore <maxrcul@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Aug 24, 2019 1:27 pm
Subject: [N3FJPSoftwareUsers] Display Frequency

I'm working the Ohio QSO party and would like to show Frequency Worked of each station in the N3FJP Recent Contacts window. Not sure how to do that.

Bill - W3PNM


Contest Log

Larry Krist
 

Is there a contest log that can be used in this weekends WW-DIGI
contest? Looks like the CW  VHF log may work?

Thanks,

Larry  N8CWU


Re: Comment section of ACLog

Larry Krist
 

Got to wsjt File, settings, reporting and uncheck the box that says db reports to comments. That worked for me.

Larry  N8CWU

On 8/30/2019 8:04 AM, wa3gm via Groups.Io wrote:
Hi Scott

When using JT Alert the comments section of AC Log puts in the signal report of the qso  Instead of the name and address of the person.....

How do I get it to go back to putting the name and address and and not the both signal reports.


Thanks
Greg wa3gm 


Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone

-------- Original message --------
From: "Scott Davis via Groups.Io" <SNKDavis@...>
Date: 8/24/19 1:32 PM (GMT-05:00)
Subject: Re: [N3FJPSoftwareUsers] Display Frequency

Hi Bill,

Thanks for your e-mail.  Press Ctrl + Shift + F.  More details are here:



Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bill DeVore <maxrcul@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Aug 24, 2019 1:27 pm
Subject: [N3FJPSoftwareUsers] Display Frequency

I'm working the Ohio QSO party and would like to show Frequency Worked of each station in the N3FJP Recent Contacts window. Not sure how to do that.

Bill - W3PNM


HPMaxim issue with FLDigi

Lee Glassman - WA5LEE
 

Probably should have tested this b4, but.. Anyway, I open the FJP HPM Log, set it up correctly, API server on. Start FLDigi, choose n3fjp logging, click connect. Yellow diamodn does not light, but this is in data stream:

RCVD:
<CMD><PROGRAMRESPONSE><PGM>N3FJP's Hiram P. Maxim Contest Log</PGM><VER>1.0</VER><APIVER>1.5</APIVER></CMD><crlf>
SEND:
<CMD><PROGRAM></CMD>SEND:
<CMD><PROGRAM></CMD>RCVD

Over and over again. When I try to choose the contest in FLDigi, I pull down the menu, choose a contest, and it stays there for a second then reverts back to NO CONTEST. When I do an exchange and <LOG>, it logs to the FLDigi log, but not to N3FJP.

What am I missing here? Sorry I waited so long, Scott...


Re: Useful DXCC map

Robert Epling <no3i@...>
 

unsubscribe

On Friday, August 30, 2019, 3:33:49 PM EDT, KC7QY <kc7qy@...> wrote:


Bo,

A very useful and free tool mentioned on this reflector in the past is Club Log. Once you sign up you can upload your AC log and it will tell you which countries you have worked and/or confirmed on each band. It also provides an easy way to order QSLs via OQRS for those Dxpeditions and DXers that use it. Just keep it open in your browser and you can quickly decide if you need a particular country. Scott has included a very user friendly upload tool in AC Log as well. There is even an option on Club Log to list by DX prefix if you want.

73,
Jim KC7QY


Re: Comment section of ACLog

wa3gm
 

Kevin

Yep thst was it.....

Thanks
Greg Wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone

-------- Original message --------
From: Kevin Gray <notsome1else@...>
Date: 8/30/19 4:29 PM (GMT-05:00)
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog

It probably isn’t the settings in ACLog, it’s more than likely the settings in WSJT-X (you didn’t mention it, but I imagine you are using this).

Go to File>Settings

Then click on the “Reporting” Tab ( 5th one over)

Under “Logging” look at the 4th check box down.

Is it checked ??

 

 

 

73 Kevin N9VPV

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of wa3gm via Groups.Io
Sent: Friday, August 30, 2019 9:50 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog

 

Scott

 

 I was hoping someone else in the group here would know what to do or have a resolution for this.....

 

On my other computer it logs the a call book name and address but on my other computer it puts the send and receive Signal report in the comment section.

 

If anyone has a resolution for this please let me know.

 

Tnx

 

Greg wa3gm 

 

 

 

Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone

 

-------- Original message --------

From: "Scott Davis via Groups.Io" <SNKDavis@...>

Date: 8/30/19 8:31 AM (GMT-05:00)

Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog

 

Hi Greg,

 

Thanks for your e-mail.  AC Log will look up the data from previous QSOs (if you have the carry comments data forward option enabled) and QRZ (if enabled),  but any data overwrites are handled by the connected program.  AC Log has no control over that.  

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: wa3gm via Groups.Io <wa3gm@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Aug 30, 2019 8:04 am
Subject: [N3FJPSoftwareUsers] Comment section of ACLog

Hi Scott

 

When using JT Alert the comments section of AC Log puts in the signal report of the qso  Instead of the name and address of the person.....

 

How do I get it to go back to putting the name and address and and not the both signal reports.

 

 

Thanks

Greg wa3gm 

 

 

Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone

 

-------- Original message --------

From: "Scott Davis via Groups.Io" <SNKDavis@...>

Date: 8/24/19 1:32 PM (GMT-05:00)

Subject: Re: [N3FJPSoftwareUsers] Display Frequency

 

Hi Bill,

 

Thanks for your e-mail.  Press Ctrl + Shift + F.  More details are here:

 

 

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Bill DeVore <maxrcul@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Aug 24, 2019 1:27 pm
Subject: [N3FJPSoftwareUsers] Display Frequency

I'm working the Ohio QSO party and would like to show Frequency Worked of each station in the N3FJP Recent Contacts window. Not sure how to do that.

Bill - W3PNM