Date   

Re: QRZ Error Message

Pat Whelton
 

Thank you Dean for taking the time to comment on QRZ’d problem and then reminding us that it doesn’t belong here.
 
Pat - KZ5J
 

Sent: Tuesday, September 17, 2019 12:16 PM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.


Dean, KC9EOQ
 
On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton <pwhelton@...> wrote:
Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Dean Holste
 

Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.


Dean, KC9EOQ


On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton <pwhelton@...> wrote:
Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: Duplicates

George Davenport
 

Another way you can try is to search do a search for the dupes if you have any info on the QSO in question. I usually search for callsign but you can search by date, band, mode, time, location and other fields. Once I locate the dupe, I just highlight it and delete.


Re: QRZ Error Message

Pat Whelton
 

Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 

Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Mike Olbrisch
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Pat Whelton
 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:
 
QRZ Login
=========
8/06/19 – Twice
8/23/19
9/11/19
9/14/19
9/15/19 – Twice
 
A little much in my opinion.
 
Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.
 
Regards,
 
Pat - KZ5J
 

Sent: Tuesday, September 17, 2019 7:30 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Larry Banks
 

Hi Paul,
 
This happens to me often if I am not actively using JTAlert to make Qs.  Just clear and click the station again and it will reset.  I think it’s the polling of QRZ that has timed out –  my computer does not go to sleep so that is not the cause in my case.

73 -- Larry -- W1DYJ

 

From: Paul Rasp
Sent: Tuesday, September 17, 2019 6:10
Subject: [N3FJPSoftwareUsers] QRZ Error Message
 

Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Mike Olbrisch
 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Scott Davis
 

Hi Paul,

Thanks for your e-mail.  Possibly, but I believe QRZ also resets your key after a period of inactivity.  

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Paul Rasp <cerritas@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Sep 17, 2019 6:10 am
Subject: [N3FJPSoftwareUsers] QRZ Error Message


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Lou Everett, Sr.
 

Internet burps every once and awhile.

Lou WA5LOU




On Tue, Sep 17, 2019 at 5:10 AM Paul Rasp <cerritas@...> wrote:

Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: Duplicates

Scott Davis
 

Hi Ron,

Thanks for your e-mail.  You can't pick and choose once you initiate the process.  If you have any doubts, be sure to back up your log before you proceed.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Ron Pogue <ron.pogue@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Sep 16, 2019 4:10 pm
Subject: [N3FJPSoftwareUsers] Duplicates

How does the duplicate function work in the software?    When you press remove duplicates are you given an option to approve the removals?  Can you merge several duplicates? 


QRZ Error Message

W4ARK
 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Duplicates

Ron Pogue
 

How does the duplicate function work in the software?    When you press remove duplicates are you given an option to approve the removals?  Can you merge several duplicates? 


Re: Glitch in latest version

John Crist <johncrist5958@...>
 

Forget previous emails. User error.
Sorry about that.

On Sat, Sep 14, 2019 at 5:34 PM John Crist <johncrist5958@...> wrote:
Tried that and it didn’t work.

On Sat, Sep 14, 2019 at 5:32 PM Scott Davis via Groups.Io <SNKDavis=aol.com@groups.io> wrote:
Hi John,

Thanks for your e-mail.  No recent changes to form resizing.  To change the form size, set the window state so that it is normal state (not minimized or maximized) and drag the edge with your mouse.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Crist <johncrist5958@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 5:00 pm
Subject: [N3FJPSoftwareUsers] Glitch in latest version

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Re: Glitch in latest version

John Crist <johncrist5958@...>
 

Tried that and it didn’t work.

On Sat, Sep 14, 2019 at 5:32 PM Scott Davis via Groups.Io <SNKDavis=aol.com@groups.io> wrote:
Hi John,

Thanks for your e-mail.  No recent changes to form resizing.  To change the form size, set the window state so that it is normal state (not minimized or maximized) and drag the edge with your mouse.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Crist <johncrist5958@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 5:00 pm
Subject: [N3FJPSoftwareUsers] Glitch in latest version

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Re: Glitch in latest version

Scott Davis
 

Hi John,

Thanks for your e-mail.  No recent changes to form resizing.  To change the form size, set the window state so that it is normal state (not minimized or maximized) and drag the edge with your mouse.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Crist <johncrist5958@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 5:00 pm
Subject: [N3FJPSoftwareUsers] Glitch in latest version

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Glitch in latest version

johncrist5958@...
 

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Re: Power setting

Scott Davis
 

Hi Mel,

Thanks for your e-mail.  AC Log defaults to the power of the previous record.  If you don't want to record power at all, just enter your next QSO with the field blank and it will remain blank on subsequent records.  Otherwise, be sure to enter the correct power when you change power levels.


http://www.n3fjp.com/faq.html#q63

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel - N7GCO <teammel@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 12:29 am
Subject: [N3FJPSoftwareUsers] Power setting

I have two questions:
1). How do you turn off the automatic power setting? I switch power levels all the time. Right now it just keeps putting one in automatically (1000 watts).
2) How do I change the power setting (or remove  it) on 100's of records? I honestly hadn't noticed it was doing this. Right now I have several hundred 30 meter contacts that have listed 1000 watts, when it should be 50-100 watts.
I have known how to do this in the past, but for the life of me I can't remember.


Re: Power setting

Mike Olbrisch
 

Use a free program called ADIF-Master, and block edit your records.

 

Sure, you can do it in notepad too.  But get one character wrong, delete a comma or miss a period, and your database is hosed.  ADIF-Master drives like Excel.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel - N7GCO
Sent: Friday, September 13, 2019 22:29 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Power setting

 

I have two questions:
1). How do you turn off the automatic power setting? I switch power levels all the time. Right now it just keeps putting one in automatically (1000 watts).
2) How do I change the power setting (or remove  it) on 100's of records? I honestly hadn't noticed it was doing this. Right now I have several hundred 30 meter contacts that have listed 1000 watts, when it should be 50-100 watts.
I have known how to do this in the past, but for the life of me I can't remember.


Power setting

Mel - N7GCO - Cheney, WA
 

I have two questions:
1). How do you turn off the automatic power setting? I switch power levels all the time. Right now it just keeps putting one in automatically (1000 watts).
2) How do I change the power setting (or remove  it) on 100's of records? I honestly hadn't noticed it was doing this. Right now I have several hundred 30 meter contacts that have listed 1000 watts, when it should be 50-100 watts.
I have known how to do this in the past, but for the life of me I can't remember.