Date   

Re: Louisiana QSO Party

Scott Davis
 

Hi Bobby,

Thanks for your e-mail.  You bet.  I've just updated the software code as you requested.  This will be part of the global contest software release I am planning for January, Lord willing.

Consider it done!  :)

Happy Thanksgiving!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bobby Baker <robert.baker@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Nov 27, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Louisiana QSO Party

Scott, we have recently started using checking software when checking LAQP logs and in the cabrillo file N3FJP creates the contest name is "LAQP" is there a way to change that to say"LA-QSO-PARTY".  This is the contest name it wants to see.   Would be a great help as at the present time i have to go into each log and correct it before we can run the log.

Thanks
Bobby Baker WM5H


Re: "Running" question -- GOT IT!

George Sabinar
 

What was the answer? There may be others who also may want to know.

G.

KD4FJ

On Wednesday, November 27, 2019, 07:26:37 PM CST, Glenn Kurzenknabe via Groups.Io <bgkurz@...> wrote:


I got the answer to my question….

TNX

Glenn, K3SWZ


"Running" question -- GOT IT!

Glenn Kurzenknabe <bgkurz@...>
 

I got the answer to my question….

TNX

Glenn, K3SWZ


Running on CW with N3FJP

Glenn Kurzenknabe <bgkurz@...>
 

Can anyone tell me how to “run” on CW with N3FJP???  Phone is obvious, but I cannot figure out anyway to “run” on CW??

CQ WW DX,  ARRL DX Contest, ARRL and CQ 160 Contests in particular..

Thanks

73

Glenn, K3SWZ


FIL SETTINGS ETC TOP MENU logdata.mdb and info bar

Wilbur Doolittle
 

Is there some way to adjust font size when adjusting window size or do I need to delete the config file or what files to get back on track

also I have to adjust bearing font to keep clock visible?
thanks AB8WD


Louisiana QSO Party

Bobby Baker
 

Scott, we have recently started using checking software when checking LAQP logs and in the cabrillo file N3FJP creates the contest name is "LAQP" is there a way to change that to say"LA-QSO-PARTY".  This is the contest name it wants to see.   Would be a great help as at the present time i have to go into each log and correct it before we can run the log.

Thanks
Bobby Baker WM5H


Upcoming RTTY Roundup - using Ham Radio Deluxe

Ed Proctor
 

Just a reminder that the W4ELP Lookup program with bridge for N3FJP loggers is ready to go for the ARRL RTTY Roundup in January. Recent improvements have made operation smoother and more reliable for users of older HRD version 5.24. Also included are changes to maintain compatibility with the latest HRD V6.7. This program allows any N3FJP logger, including AC Log, to be used in real time with Ham Radio Deluxe DM780 digital software of with HRD Logbook. It is free and can be downloaded at https://groups.io/g/W4ELP.
If you anticipate using this, please download early and practice well before the contest!
73,
Ed - W4ELP


Re: Winkeyer Emulator and RemoteRig RRC Query

Scott Davis
 

Hi Mike,

Thanks for your e-mail.  There have been no changes to the hot keys for the CW form.  As always, Ctrl + W displays the CW setup form and Ctrl + Shift + W displays the mini form.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: cwtopop <mj451@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Nov 26, 2019 8:12 am
Subject: Re: [N3FJPSoftwareUsers] Winkeyer Emulator and RemoteRig RRC Query

Speaking of Winkeyer, the function menu for Winkeyer used to appear on
the main ACL screen.  Now, with the Cntrl + Shift + W command the
function menu appears on a separate screen by itself. Anyone know how to
get it back on the main screen?

Thanks and goo DX!

W4DL   Mike in EL96wf






Re: Logging question

Larry Banks
 

You will probably receive NILs for those Qs as they will submit using the call that they sent.  ALWAYS log the call you hear.  You just need to hit enter a second time to log those calls.

73 -- Larry -- W1DYJ

 

From: robert
Sent: Monday, November 25, 2019 21:06
Subject: [N3FJPSoftwareUsers] Logging question
 
During this weekends DX contest I wrkd.  MW/R6AF. The software said error The 3rd digit must be a number. So I logged Him as MW1/R6AF which logged OK. Later i wrkd. FS/VA3DF. Same thing. I just quickly redid the call as VA3DF/FO & it logged OK. Not run into this in previous contests.
K9IL


Re: Winkeyer Emulator and RemoteRig RRC Query

cwtopop
 

Speaking of Winkeyer, the function menu for Winkeyer used to appear on the main ACL screen.  Now, with the Cntrl + Shift + W command the function menu appears on a separate screen by itself. Anyone know how to get it back on the main screen?

Thanks and goo DX!

W4DL   Mike in EL96wf


Re: Logging question

Scott Davis
 

Hi Robert,

Thanks for your e-mail.  If you read the dialogue carefully, it alerts you that there isn't a numerical value in the 2nd or 3rd character, but it also tells you just to press enter to log the QSO anyway.  Just press enter again and you are all set.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: robert <k9ilmustang@...>
To: n3fjp users <n3fjpsoftwareusers@groups.io>
Sent: Tue, Nov 26, 2019 5:37 am
Subject: [N3FJPSoftwareUsers] Logging question

During this weekends DX contest I wrkd.  MW/R6AF. The software said error. The 3rd digit must be a number. So I logged Him as MW1/R6AF which logged OK. Later i wrkd. FS/VA3DF. Same thing. I just quickly redid the call as VA3DF/FO & it logged OK. Not run into this in previous contests.
K9IL


Re: Log too big?

Jerry W1IE
 

There could be significant improvement in the redesign of the Access table. Right now, Scott has only one table which is very flat (in other words, it holds all the data and the data is all ASCII) so if it was designed in at least the 2nd Norm, things would start to move faster. You can help move things along by adding some indexes on some of the tables, such as the callsign field.

There are other things that could be done.

Best regards,

Jerry, W1IE

-----Original Message-----
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Jim Shorney
Sent: Monday, November 25, 2019 21:16 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Log too big?


All good points Mike. I was aiming at the lowest common denominator here, the ham that is not very computer savvy and just wants to make'ergofaster. The easiest answer there is to just get a bleeding edge computer. Any current front-line gaming rig should do.

73

-Jim
NU0C

On Mon, 25 Nov 2019 06:21:46 -0700
"Mike Olbrisch" <@Mike_KD5KC> wrote:

Good morning.



There is more to it than just the volume of records. Amount of memory, amount of FREE memory, processor and speed, and what other programs running in the background can all make a huge difference.



One FREE thing you can do to speed it up is this. Open your task manager and see what-all you have running. Look to see what processes might be monopolizing your processor cycles, or reserving your memory. Turn off those things you don t need.



Look at my QRZ profile-photo of the operating desk. That is an older Win-7 (64 bit) I got from an SK sale. It isn t anything special. The only thing I did was double the memory and clean out all the programs it wouldn t need. All I use it for is logging and digital work. Sure, a nice new Win-10 box would be nicer. But this works, and I see no need to spend $$$$ for a replacement.



If I have to upgrade it from Win-7 to Win-10, it may suffer and need to be replaced once Win-7 is no longer supported. We ll see.



Give it a look. Best of luck!



Mike KD5KC -- El Paso -- Texas.



The canyons are calling, colorful and deep. But I have promises to keep.

And miles to go still in my Jeep... And miles to go still in my Jeep...







ADVENTURE: The respectful pursuit of trouble.









On Sun, Nov 24, 2019 at 6:36 PM Jim Shorney <@NU0C <mailto:@NU0C> > wrote:


27,000 QSOs will slow the database down. That's just the way it is. You can either run in Last 50 mode like most of us probably do or you can buy the fastest bad-boy computer you can get your hands on and equip it with the most RAM and fastest SSD you can get.

73

-Jim
NU0C

On Sun, 24 Nov 2019 15:49:25 -0600
"Dale Martin" <@kg5u <mailto:@kg5u> > wrote:

Any suggestions other than just using the logsheet in the 'Last 50' mode?
There's a lot of 'downtime' in FT8, so I use it to go through the
log and update the not-yet-confirmed QSOs S/R status to Y/Y and
removing the confirmed QSO from LOTW.







Re: Logging question

Rebecca Milligan
 

Hi,

 

I had the same message but there was a dialogue box that asked me if I wanted to log it anyway.  It logged correctly after selecting the option to log anyway.

 

N4EFS

 

From: robert
Sent: Tuesday, November 26, 2019 5:37 AM
To: n3fjp users
Subject: [N3FJPSoftwareUsers] Logging question

 

During this weekends DX contest I wrkd.  MW/R6AF. The software said error. The 3rd digit must be a number. So I logged Him as MW1/R6AF which logged OK. Later i wrkd. FS/VA3DF. Same thing. I just quickly redid the call as VA3DF/FO & it logged OK. Not run into this in previous contests.

K9IL

 


Logging question

robert
 

During this weekends DX contest I wrkd.  MW/R6AF. The software said error. The 3rd digit must be a number. So I logged Him as MW1/R6AF which logged OK. Later i wrkd. FS/VA3DF. Same thing. I just quickly redid the call as VA3DF/FO & it logged OK. Not run into this in previous contests.
K9IL


Re: Log too big?

Dale Martin, KG5U
 

Many thanks to all for the comments. 

The computer is an i5  at 3GHz. RAM is a puny 8GB. I may have a suitable memory card in another computer I no longer use. I'll pop that in and see if there's a difference. 

But, keeping the display list to 50 works for me.

73,
dale, kg5u


Re: Log too big?

Jim Shorney
 

All good points Mike. I was aiming at the lowest common denominator here, the ham that is not very computer savvy and just wants to make'ergofaster. The easiest answer there is to just get a bleeding edge computer. Any current front-line gaming rig should do.

73

-Jim
NU0C

On Mon, 25 Nov 2019 06:21:46 -0700
"Mike Olbrisch" <@Mike_KD5KC> wrote:

Good morning.



There is more to it than just the volume of records. Amount of memory, amount of FREE memory, processor and speed, and what other programs running in the background can all make a huge difference.



One ”FREE” thing you can do to speed it up is this. Open your task manager and see what-all you have running. Look to see what processes might be monopolizing your processor cycles, or reserving your memory. Turn off those things you don’t need.



Look at my QRZ profile-photo of the operating desk. That is an older Win-7 (64 bit) I got from an SK sale. It isn’t anything special. The only thing I did was double the memory and clean out all the programs it wouldn’t need. All I use it for is logging and digital work. Sure, a nice new Win-10 box would be nicer. But this works, and I see no need to spend $$$$ for a replacement.



If I have to upgrade it from Win-7 to Win-10, it may suffer and need to be replaced once Win-7 is no longer supported. We’ll see.



Give it a look. Best of luck!



Mike – KD5KC -- El Paso -- Texas.



The canyons are calling, colorful and deep. But I have promises to keep.

And miles to go still in my Jeep... And miles to go still in my Jeep...







ADVENTURE: The respectful pursuit of trouble.









On Sun, Nov 24, 2019 at 6:36 PM Jim Shorney <@NU0C <mailto:@NU0C> > wrote:


27,000 QSOs will slow the database down. That's just the way it is. You can either run in Last 50 mode like most of us probably do or you can buy the fastest bad-boy computer you can get your hands on and equip it with the most RAM and fastest SSD you can get.

73

-Jim
NU0C

On Sun, 24 Nov 2019 15:49:25 -0600
"Dale Martin" <@kg5u <mailto:@kg5u> > wrote:

Any suggestions other than just using the logsheet in the 'Last 50' mode?
There's a lot of 'downtime' in FT8, so I use it to go through the log and
update the not-yet-confirmed QSOs S/R status to Y/Y and removing the
confirmed QSO from LOTW.







Re: Log too big?

Frank MacKenzie-Lamb
 

I’m with you Don……especially staying with ACLog

 

73

Frank

NG1I

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Don N4KC
Sent: Monday, November 25, 2019 10:00 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Log too big?

 

Well, I have a fairly fast Win10 machine with plenty of RAM, yet when I switch from "Last 50" to "All" it takes 13 seconds to display the data. I have about 24,000 records in ACLog. I can see how this would delay showing that your FT8 QSO had been successfully logged. Obviously, ACLog has to do a lot of work each time a change is made, including logging a new contact, when you are displaying that many records.

I'd say you have three choices:

1) As KD5KC (great suffix, Mike!) suggests above, invest in the fastest machine you can and stop all processes you don't need so as to save RAM, or

2) Accept that it will take ten to fifteen seconds for WSJT-X to confirm that you have successfully logged the FT8 QSO, or

3) Keep ACLog on ""Last 50" and do the database housekeeping when you are not logging contacts.

Note that I did not suggest trying other logging programs. I suspect you'd see similar behavior with most (if not all) and, more importantly, there are none as good as ACLog...in my humble opinion.

73,

Don N4KC
www.donkeith.com
www.n4kc.com
  


Re: Winkeyer Emulator and RemoteRig RRC Query

Scott Davis
 

Hi Dennis,

Thanks for your follow up.  To change the Winkey settings in the software, click Settings > Transmit > CW.  Then click the Winkeyer button on the form that appears, but I doubt you need to change anything from defaults as Winkeyer isn't rig dependent..

Again, if you have your radio configured for keyer instead of straight key, it will not work.  You must have Winkeyer plugged into your straight key jack.

Good luck!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dennis - WU6X <wu6x@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Nov 25, 2019 12:48 pm
Subject: Re: [N3FJPSoftwareUsers] Winkeyer Emulator and RemoteRig RRC Query

What it sounds like is that the macros are keying the radio and sending CW, but not distinguishing the difference between a dot or dash. Is there a software setting in the CW transmission settings I may need to change? Currently everything is set to defaults. 
Dennis WU6X 


Re: Winkeyer Emulator and RemoteRig RRC Query

Dennis - WU6X
 

What it sounds like is that the macros are keying the radio and sending CW, but not distinguishing the difference between a dot or dash. Is there a software setting in the CW transmission settings I may need to change? Currently everything is set to defaults. 

Dennis WU6X 


Re: Log too big?

Frank MacKenzie-Lamb
 

Mike, you hit the nail on the head….my laptop 32GB memory and 1T solid state drive…all works well

 

Have a nice T-Day everyone!

 

Frank

NG1I

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mike Olbrisch
Sent: Monday, November 25, 2019 8:22 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Log too big?

 

Good morning.

 

There is more to it than just the volume of records.  Amount of memory, amount of FREE memory, processor and speed, and what other programs running in the background can all make a huge difference.

 

One ”FREE” thing you can do to speed it up is this. Open your task manager and see what-all you have running.  Look to see what processes might be monopolizing your processor cycles, or reserving your memory.  Turn off those things you don’t need.

 

Look at my QRZ profile-photo of the operating desk.  That is an older Win-7 (64 bit) I got from an SK sale.  It isn’t anything special.  The only thing I did was double the memory and clean out all the programs it wouldn’t need.  All I use it for is logging and digital work.  Sure, a nice new Win-10 box would be nicer.  But this works, and I see no need to spend $$$$ for a replacement.

 

If I have to upgrade it from Win-7 to Win-10, it may suffer and need to be replaced once Win-7 is no longer supported.  We’ll see.

 

Give it a look.  Best of luck!

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

On Sun, Nov 24, 2019 at 6:36 PM Jim Shorney <jshorney@...> wrote:


27,000 QSOs will slow the database down. That's just the way it is. You can either run in Last 50 mode like most of us probably do or you can buy the fastest bad-boy computer you can get your hands on and equip it with the most RAM and fastest SSD you can get.

73

-Jim
NU0C

On Sun, 24 Nov 2019 15:49:25 -0600
"Dale Martin" <kg5u@...> wrote:

> Any suggestions other than just using the logsheet in the  'Last 50' mode?
> There's a lot of 'downtime' in FT8, so I use it to go through the log and
> update the not-yet-confirmed QSOs S/R status to Y/Y and removing the
> confirmed QSO from LOTW.