Date   

dx spotting in FT8

John Wiener
 

Hi
I've been trying to get N3FJP to send into to a spot site.  I monitor DXSummit.  I find that when I am on FT4, my spots are listed automatically.  If I switch to FT8, they are not.
I can find no toggle, etc that would differentiate logging behavior between FT4 and FT8.  ACLog USED to log my FT8 spots.
My setup is WSJT-X 2.1.0, JTAlert 2.15.7 and ACLog 6.6
Your thoughts?
John AB8O


Re: New Feature(s)

K8TS
 

I used the band map “block….” For the first time after many, many years, and found it very useful, finding stations that had only been spotted minimally.  Will be using more often.  Once a “runner” has been worked, he never shows again unless he moves to a different portion of the band.

Dale K8TS

 

Sent from Mail for Windows 10

 

From: Mike Saeger
Sent: Monday, March 16, 2020 4:24 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] New Feature(s)

 

I spent the weekend using the WIQP log. Prefer it to N1MM -- but, there are 2 features of N1MM I wish I had back.

  1. I operate Search and Pounce (S&P). I listen, enter the log info into the log -- work  the station -- Press Enter to Log the Q. Sometimes though, the pileup is just too large and I click on another station on my panadapter planning to come back later. Once I change frequency, N1MM erases the log entry. I like that. Could your log do that too?
  2. When I click on a frequency on the panadapter, N1MM displays the station you already worked on that frequency. If I am Searching & Pouncing, I then don't waste time waiting for the "running" station to ID -- I go merrily on my way. I think N1MM remembers if you actually worked the station before and might use a color code to remind you to either skip this station or you waited around before (see above) and didn't work him.

Your answer could be -- well then use N1MM -- OK I could do that, but if you ever add this feature to your log it would be about perfect!

Mike N9MS

 


Re: New Feature(s)

Scott Davis
 

Hi Ed,

Thanks for your e-mail.  There isn't a way to block duplicates on the list, only the band map.  Additionally, while you can use it for entities confirmed in AC Log, it is mostly applicable to specific call signs in the contest software that, if worked again, would be identified as duplicates in your log.  In either case, it doesn't hide duplicate unworked spots.

Capture.JPG



More details on setting up the band map are here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Ed W2LCQ via Groups.Io <w2lcq@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Mar 17, 2020 12:03 am
Subject: Re: [N3FJPSoftwareUsers] New Feature(s)

Scott,

I see multiple spots for the same station On the lower panel of the log which I believe is the Bandmap. Sometimes 5-6. spots. You said to go to the more filter section and block duplicates but I  cannot find a check box with that name. Would you please provide the exact wording of the applicable box. Thanks so much. 

All best, Ed

73, Ed Jones W2LCQ

CWops 701 - SKCC 5474T - FISTS 12294
                 Frankford Radio Club

“I am busy just now again on electro-magnetism, and think I have got hold of a good thing, but can't say....” —-Michael Faraday

On Mar 16, 2020, at 5:17 PM, Scott Davis via Groups.Io <SNKDavis@...> wrote:


Hi Mike,

Thanks for your e-mail and suggestions.  Responses inserted:



-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 4:24 pm
Subject: [N3FJPSoftwareUsers] New Feature(s)

I spent the weekend using the WIQP log. Prefer it to N1MM -- but, there are 2 features of N1MM I wish I had back.

**  Thanks for using my software.  I'm really happy you liked it!  :)

  1. I operate Search and Pounce (S&P). I listen, enter the log info into the log -- work  the station -- Press Enter to Log the Q. Sometimes though, the pileup is just too large and I click on another station on my panadapter planning to come back later. Once I change frequency, N1MM erases the log entry. I like that. Could your log do that too?
**  I don't have any Flex equipment here, so my ability to code for the panadapter specifically is limited.  My software interfaces with Flex via their DLL.  If you click on a spot on my software's band map, my software will clear the previous call and tune immediately to the spot frequency.
  1. When I click on a frequency on the panadapter, N1MM displays the station you already worked on that frequency. If I am Searching & Pouncing, I then don't waste time waiting for the "running" station to ID -- I go merrily on my way. I think N1MM remembers if you actually worked the station before and might use a color code to remind you to either skip this station or you waited around before (see above) and didn't work him.
**  For the band map, on the DX Spotting set up form, click the More Filter button and then enable the option to block duplicates.  Again, I understand that you are asking about the panadapter.  If I ever wind up with a rig with a panadapter, I will see what I can do.

Thanks again for your suggestions!

**  Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Your answer could be -- well then use N1MM -- OK I could do that, but if you ever add this feature to your log it would be about perfect!

Mike N9MS


Re: New Feature(s)

Ed W2LCQ <w2lcq@...>
 

Scott,

I see multiple spots for the same station On the lower panel of the log which I believe is the Bandmap. Sometimes 5-6. spots. You said to go to the more filter section and block duplicates but I  cannot find a check box with that name. Would you please provide the exact wording of the applicable box. Thanks so much. 

All best, Ed

73, Ed Jones W2LCQ

CWops 701 - SKCC 5474T - FISTS 12294
                 Frankford Radio Club

“I am busy just now again on electro-magnetism, and think I have got hold of a good thing, but can't say....” —-Michael Faraday


On Mar 16, 2020, at 5:17 PM, Scott Davis via Groups.Io <SNKDavis@...> wrote:


Hi Mike,

Thanks for your e-mail and suggestions.  Responses inserted:



-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 4:24 pm
Subject: [N3FJPSoftwareUsers] New Feature(s)

I spent the weekend using the WIQP log. Prefer it to N1MM -- but, there are 2 features of N1MM I wish I had back.

**  Thanks for using my software.  I'm really happy you liked it!  :)

  1. I operate Search and Pounce (S&P). I listen, enter the log info into the log -- work  the station -- Press Enter to Log the Q. Sometimes though, the pileup is just too large and I click on another station on my panadapter planning to come back later. Once I change frequency, N1MM erases the log entry. I like that. Could your log do that too?
**  I don't have any Flex equipment here, so my ability to code for the panadapter specifically is limited.  My software interfaces with Flex via their DLL.  If you click on a spot on my software's band map, my software will clear the previous call and tune immediately to the spot frequency.
  1. When I click on a frequency on the panadapter, N1MM displays the station you already worked on that frequency. If I am Searching & Pouncing, I then don't waste time waiting for the "running" station to ID -- I go merrily on my way. I think N1MM remembers if you actually worked the station before and might use a color code to remind you to either skip this station or you waited around before (see above) and didn't work him.
**  For the band map, on the DX Spotting set up form, click the More Filter button and then enable the option to block duplicates.  Again, I understand that you are asking about the panadapter.  If I ever wind up with a rig with a panadapter, I will see what I can do.

Thanks again for your suggestions!

**  Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Your answer could be -- well then use N1MM -- OK I could do that, but if you ever add this feature to your log it would be about perfect!

Mike N9MS


Re: New Feature(s)

Mike Saeger
 

Clicking on the  panadapter just sends a frequency change to the radio via CAT control. Really nothing special. My SDR (Hermes) uses the Kenwood Ts-2000 CAT commands which already work well with your logging program. You already pick up my band & mode changes. On a “real” radio it would be the same as turning the VFO knob.


Re: New Feature(s)

Scott Davis
 

Hi Mike,

Thanks for your e-mail and suggestions.  Responses inserted:



-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 4:24 pm
Subject: [N3FJPSoftwareUsers] New Feature(s)

I spent the weekend using the WIQP log. Prefer it to N1MM -- but, there are 2 features of N1MM I wish I had back.

**  Thanks for using my software.  I'm really happy you liked it!  :)

  1. I operate Search and Pounce (S&P). I listen, enter the log info into the log -- work  the station -- Press Enter to Log the Q. Sometimes though, the pileup is just too large and I click on another station on my panadapter planning to come back later. Once I change frequency, N1MM erases the log entry. I like that. Could your log do that too?
**  I don't have any Flex equipment here, so my ability to code for the panadapter specifically is limited.  My software interfaces with Flex via their DLL.  If you click on a spot on my software's band map, my software will clear the previous call and tune immediately to the spot frequency.
  1. When I click on a frequency on the panadapter, N1MM displays the station you already worked on that frequency. If I am Searching & Pouncing, I then don't waste time waiting for the "running" station to ID -- I go merrily on my way. I think N1MM remembers if you actually worked the station before and might use a color code to remind you to either skip this station or you waited around before (see above) and didn't work him.
**  For the band map, on the DX Spotting set up form, click the More Filter button and then enable the option to block duplicates.  Again, I understand that you are asking about the panadapter.  If I ever wind up with a rig with a panadapter, I will see what I can do.

Thanks again for your suggestions!

**  Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Your answer could be -- well then use N1MM -- OK I could do that, but if you ever add this feature to your log it would be about perfect!

Mike N9MS


Re: SSL Certificate

Scott Davis
 

Hi John,

Thanks for your e-mail.  If you are receiving the TLS security error when you attempt to download from LoTW, upgrading to AC Log 6.4 or later will correct that (current version is 6.6).  Details are here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 4:49 pm
Subject: [N3FJPSoftwareUsers] SSL Certificate

What do I look for in the IE browser to find the Lotw certificate and delete it. I see a bunch there but I am not sure which one to remove.
73 John


SSL Certificate

w4fga@...
 

What do I look for in the IE browser to find the Lotw certificate and delete it. I see a bunch there but I am not sure which one to remove.
73 John


New Feature(s)

Mike Saeger <mike.saeger@...>
 

I spent the weekend using the WIQP log. Prefer it to N1MM -- but, there are 2 features of N1MM I wish I had back.

  1. I operate Search and Pounce (S&P). I listen, enter the log info into the log -- work  the station -- Press Enter to Log the Q. Sometimes though, the pileup is just too large and I click on another station on my panadapter planning to come back later. Once I change frequency, N1MM erases the log entry. I like that. Could your log do that too?
  2. When I click on a frequency on the panadapter, N1MM displays the station you already worked on that frequency. If I am Searching & Pouncing, I then don't waste time waiting for the "running" station to ID -- I go merrily on my way. I think N1MM remembers if you actually worked the station before and might use a color code to remind you to either skip this station or you waited around before (see above) and didn't work him.
Your answer could be -- well then use N1MM -- OK I could do that, but if you ever add this feature to your log it would be about perfect!

Mike N9MS


Re: WIQP Scoring

KB5WCK
 

No problem. Just thought I would ask.


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via Groups.Io <SNKDavis@...>
Sent: Monday, March 16, 2020 12:43:24 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] WIQP Scoring
 
Hi Jeff,

Thanks for your e-mail.  Sorry, no, the size of the data entry fields themselves are not user customizable.

I'm sorry that I didn't have the answer you are looking for.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Grantham <jeff@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Mar 16, 2020 1:18 pm
Subject: Re: [N3FJPSoftwareUsers] WIQP Scoring

Is there a way to change the size of the comments field? I would like to change the width to allow for a couple more fields to be displayed in the entry area.


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via Groups.Io <SNKDavis@...>
Sent: Monday, March 16, 2020 6:00:01 AM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] WIQP Scoring
 
Hi Mike,

Thanks for your e-mail.  When you write the Cabrillo file, power multipliers and other bonuses are added to your base score.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 2:20 am
Subject: [N3FJPSoftwareUsers] WIQP Scoring

I submitted my Cabrillo log but the "Claimed Score" in the log does not match the Total Score shown on the WIQP log.

I'm confused. What is my score?

Mike N9MS


Re: WIQP Scoring

Scott Davis
 

Hi Jeff,

Thanks for your e-mail.  Sorry, no, the size of the data entry fields themselves are not user customizable.

I'm sorry that I didn't have the answer you are looking for.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Grantham <jeff@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Mar 16, 2020 1:18 pm
Subject: Re: [N3FJPSoftwareUsers] WIQP Scoring

Is there a way to change the size of the comments field? I would like to change the width to allow for a couple more fields to be displayed in the entry area.


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via Groups.Io <SNKDavis@...>
Sent: Monday, March 16, 2020 6:00:01 AM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] WIQP Scoring
 
Hi Mike,

Thanks for your e-mail.  When you write the Cabrillo file, power multipliers and other bonuses are added to your base score.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 2:20 am
Subject: [N3FJPSoftwareUsers] WIQP Scoring

I submitted my Cabrillo log but the "Claimed Score" in the log does not match the Total Score shown on the WIQP log.

I'm confused. What is my score?

Mike N9MS


Re: WIQP Scoring

KB5WCK
 

Is there a way to change the size of the comments field? I would like to change the width to allow for a couple more fields to be displayed in the entry area.


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via Groups.Io <SNKDavis@...>
Sent: Monday, March 16, 2020 6:00:01 AM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] WIQP Scoring
 
Hi Mike,

Thanks for your e-mail.  When you write the Cabrillo file, power multipliers and other bonuses are added to your base score.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 2:20 am
Subject: [N3FJPSoftwareUsers] WIQP Scoring

I submitted my Cabrillo log but the "Claimed Score" in the log does not match the Total Score shown on the WIQP log.

I'm confused. What is my score?

Mike N9MS


Re: WIQP Scoring

Scott Davis
 

Hi Mike,

Thanks for your e-mail.  When you write the Cabrillo file, power multipliers and other bonuses are added to your base score.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mike Saeger <mike.saeger@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Mar 16, 2020 2:20 am
Subject: [N3FJPSoftwareUsers] WIQP Scoring

I submitted my Cabrillo log but the "Claimed Score" in the log does not match the Total Score shown on the WIQP log.

I'm confused. What is my score?

Mike N9MS


Re: QRZ Internet Access Error

Scott Davis
 

Hi Milford,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  The only settings in AC Log related to QRZ Online lookup are:

-  A valid QRZ UserName
-  A valid QRZ Password
- The check box checked to Enable QRZ Internet Lookup
-  Make sure no other callbook lookup options are selected.

In addition:

-  You'll need to set your Windows Protection and / or Internet protection software to allow AC Log to access the Internet
-  A QRZ subscription in good standing

Also, make sure that you don't have any unusual characters in your user name or password.  If you stick to letters and numbers you will be fine.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Milford Craig via Groups.Io <tacjac@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Mar 15, 2020 8:26 pm
Subject: [N3FJPSoftwareUsers] QRZ Internet Access Error

Good evening Ladies and Gentlemen


Working on FT8 and using N3FJP, JT Alert, and Amateur Contact Log.  When
a contact is made. the contact information is logged but the window
comes up with the 'QRZ Internet Access Error'.

I can click it off and then when I go to add information, (i.e. the band
or mode) this window comes up again.

I checked with QRZ and they suggested that it was my password for QRZ. 
I did have a symbol in it and QRZ thought that this may cause an error
with N3FJP.

I adjusted the password but it did not halo the challenge with the 'QRZ
Internet Access Error'.

Please help me with this challenge.

--
73

Milford Craig
N3WYG

"A VETERAN--whether active duty, retired, or National Guard or
reserve--is someone who, at one point in their life, wrote a
blank check made payable to 'The United States of America',
for an amount of 'up to and including my life'."





WIQP Scoring

Mike Saeger <mike.saeger@...>
 

I submitted my Cabrillo log but the "Claimed Score" in the log does not match the Total Score shown on the WIQP log.

I'm confused. What is my score?

Mike N9MS


QRZ Internet Access Error

Milford Craig
 

Good evening Ladies and Gentlemen


Working on FT8 and using N3FJP, JT Alert, and Amateur Contact Log.  When a contact is made. the contact information is logged but the window comes up with the 'QRZ Internet Access Error'.

I can click it off and then when I go to add information, (i.e. the band or mode) this window comes up again.

I checked with QRZ and they suggested that it was my password for QRZ.  I did have a symbol in it and QRZ thought that this may cause an error with N3FJP.

I adjusted the password but it did not halo the challenge with the 'QRZ Internet Access Error'.

Please help me with this challenge.

--
73

Milford Craig
N3WYG

"A VETERAN--whether active duty, retired, or National Guard or
reserve--is someone who, at one point in their life, wrote a
blank check made payable to 'The United States of America',
for an amount of 'up to and including my life'."


Re: ACLOG LoTW Authentication UPDATE RESOLVED

Steve <steve@...>
 

After removing the HTTPS/SSL certificate for LoTW in the default browser, both upload and download in ACLog are working as they should.

73

Steve

W5CIA

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Steve
Sent: Friday, March 13, 2020 8:24 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] ACLOG LoTW Authentication

 

Hey Scott

Thanks for the reply and support, I have isolated the issue to browser related. When closed (Opera or Edge) both upload real time and download on demand are working as they should in ACLog.

Something corrupt buried down deep in Windows, I did all the obvious i.e. flushing cache, history, ui/pw, etc.

Anyway, nothing wrong on your end from what I can tell. I’ll advise the group if I can get this figured out.

73

Steve

W5CIA

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Scott Davis via Groups.Io
Sent: Thursday, March 12, 2020 1:28 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] ACLOG LoTW Authentication

 

Hi Steve,

 

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I just did a download from LoTW in AC Log and it worked fine here.  Make sure your Internet protection software isn't clamping down on AC Log and that your sign on credentials are correct.  More details are here:

 

 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Larry Banks via Groups.Io <larryb.w1dyj@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Mar 12, 2020 1:48 pm
Subject: Re: [N3FJPSoftwareUsers] ACLOG LoTW Authentication

My understanding is that the problem IS NOT at the LoTW end.


73 -- Larry -- W1DYJ

 

From: Bill W0EJ

Sent: Thursday, March 12, 2020 13:29

Subject: Re: [N3FJPSoftwareUsers] ACLOG LoTW Authentication

 

Steve, QRZ.com can’t download from LoTW and have now posted that info on your Settings window. I can upload with DXKeeper and my ACLog downloaded successfully yesterday. I’d guess LoTW has a glitch to work out.   My intent was just to let you know, you are not the only one with LoTW issues.

73 Bill W0EJ

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Steve
Sent: Thursday, March 12, 2020 12:02
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] ACLOG LoTW Authentication

 

Good Morning
Yesterday starting around 2000z, I noticed my auto upload was not working from AC Log to LoTW.
I verified LoTW was up and manually uploaded an adif via TQSL with no issues. Problem has been
intermittent since. Close and reopen ACLOG usually allows for a few auto upload QSO's and then stops again. Problem is also affecting downloading LoTW to ACLOG.
Windows 10 Current Update
TQSL 2.5.1
ACLOG 6.6
Any thoughts and advice are greatly appreciated.
Thanks
Steve
W5CIA

 

Virus-free. www.avast.com


Re: Call Sign Question N4MNC

Mike Olbrisch
 

Drag the warning pop-up out of the way.  You’ll see a block called OPERATOR.  Many of us messed it up by putting our names in it.  That block needs to contain your call sign too.  That should fix it for you.

 

Good luck.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Carl Batchelder
Sent: Sunday, March 15, 2020 10:55 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Call Sign Question N4MNC

 

I just bought AC Log, and it didn't like the call sign I entered.   I've had this call sign for a month, and it show on the FCC site, and my QRZ login with that call sign works.  What "behind-the-scenes" check is failing for this?

 

image.png

 


Carl

 

Virus-free. www.avast.com


Re: Call Sign Question N4MNC

Scott Davis
 

Hi Carl,

Thanks for your e-mail.  You left the information message covering the Operator field, so I can't tell what value you typed there?


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Carl Batchelder <carlbatchny@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Mar 15, 2020 12:54 pm
Subject: [N3FJPSoftwareUsers] Call Sign Question N4MNC

I just bought AC Log, and it didn't like the call sign I entered.   I've had this call sign for a month, and it show on the FCC site, and my QRZ login with that call sign works.  What "behind-the-scenes" check is failing for this?

image.png


Carl

Virus-free. www.avast.com


Call Sign Question N4MNC

Carl Batchelder <carlbatchny@...>
 

I just bought AC Log, and it didn't like the call sign I entered.   I've had this call sign for a month, and it show on the FCC site, and my QRZ login with that call sign works.  What "behind-the-scenes" check is failing for this?

image.png


Carl

Virus-free. www.avast.com