Date   

Re: Unable to delete contact/QSO

Brooks@...
 

haha...can't believe i didn't think of that.  Thanks!

-Brooks


Re: Unable to delete contact/QSO

Scott Davis
 

Hi Brooks,

Thanks for your e-mail.  Left click instead of right click and you will be all set.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Mar 22, 2020 6:13 am
Subject: [N3FJPSoftwareUsers] Unable to delete contact/QSO

When I right click on a QSO and subsequently click the 'delete' button, the edit window flashes a few times and nothing happens.  I can add QSOs and edit them, but unable to delete.  Anyone have any idea what's going on?


Re: UTC Off

Scott Davis
 

Hi Dale,

Thanks for your e-mail.  My software reads the UTC time directly from your OS.  There is nothing to change or set in AC Log.  As long as your OS settings are correct, you will be fine.  More details are here:


http://www.n3fjp.com/faq.html#q51

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Mar 22, 2020 12:31 am
Subject: Re: [N3FJPSoftwareUsers] UTC Off

For mountain time you are correct. we were talking about the gentlemans problem in the central time zone with daylight savings time.

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] UTC Off
From: "Mike Olbrisch" <mike-2020@...>
Date: Sat, March 21, 2020 11:17 pm
To: <N3FJPSoftwareUsers@groups.io>

What is incorrect?  El Paso is on Mountain time.  The rest of Texas is not.  How is that incorrect?  DST in mountain time is 6 hours difference.  Show me where this is wrong Mr. Marcus…..
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel Marcus
Sent: Saturday, March 21, 2020 22:07 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off
 
incorrect CDST -5 CST -6
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] UTC Off
From: "Mike Olbrisch" <mike-2020@...>
Date: Sat, March 21, 2020 9:21 pm
To: <N3FJPSoftwareUsers@groups.io>
Agreed.  On DST, mountain time is 6 hours off UTC right now.  Normally 7 in winter.  We just talked to the relatives in Germany a few hours ago, 4pm here was 11pm there, and presently they are UTC +1.
 
 
Mike – KD5KC -- El Paso -- Texas.
 
The canyons are calling, colorful and deep.  But I have promises to keep.
And miles to go still in my Jeep...   And miles to go still in my Jeep...
 
 
ADVENTURE:  The respectful pursuit of trouble.
 
 
 
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Neil Macklem via Groups.Io
Sent: Saturday, March 21, 2020 20:13 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off
 
Hi Dale,
 
If you computer is showing CDST as -6 hours from UTC, something is amiss with the settings. 
 
CDST is 5 hours behind UTC. CST is 6 hours behind. Here in EDST we are 4 hours behind UTC, when on standard time we are -5 hours.
 
Neil
VE3SST 
 
On Sat, 21 Mar 2020 at 21:36, Dale Holloway, K4EQ
I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Unable to delete contact/QSO

Brooks@...
 

When I right click on a QSO and subsequently click the 'delete' button, the edit window flashes a few times and nothing happens.  I can add QSOs and edit them, but unable to delete.  Anyone have any idea what's going on?


Re: UTC Off

Mel Marcus
 

For mountain time you are correct. we were talking about the gentlemans problem in the central time zone with daylight savings time.

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] UTC Off
From: "Mike Olbrisch" <mike-2020@...>
Date: Sat, March 21, 2020 11:17 pm
To: <N3FJPSoftwareUsers@groups.io>

What is incorrect?  El Paso is on Mountain time.  The rest of Texas is not.  How is that incorrect?  DST in mountain time is 6 hours difference.  Show me where this is wrong Mr. Marcus…..
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel Marcus
Sent: Saturday, March 21, 2020 22:07 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off
 
incorrect CDST -5 CST -6
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] UTC Off
From: "Mike Olbrisch" <mike-2020@...>
Date: Sat, March 21, 2020 9:21 pm
To: <N3FJPSoftwareUsers@groups.io>
Agreed.  On DST, mountain time is 6 hours off UTC right now.  Normally 7 in winter.  We just talked to the relatives in Germany a few hours ago, 4pm here was 11pm there, and presently they are UTC +1.
 
 
Mike – KD5KC -- El Paso -- Texas.
 
The canyons are calling, colorful and deep.  But I have promises to keep.
And miles to go still in my Jeep...   And miles to go still in my Jeep...
 
 
ADVENTURE:  The respectful pursuit of trouble.
 
 
 
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Neil Macklem via Groups.Io
Sent: Saturday, March 21, 2020 20:13 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off
 
Hi Dale,
 
If you computer is showing CDST as -6 hours from UTC, something is amiss with the settings. 
 
CDST is 5 hours behind UTC. CST is 6 hours behind. Here in EDST we are 4 hours behind UTC, when on standard time we are -5 hours.
 
Neil
VE3SST 
 
On Sat, 21 Mar 2020 at 21:36, Dale Holloway, K4EQ
I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Re: UTC Off

Mike Olbrisch
 

What is incorrect?  El Paso is on Mountain time.  The rest of Texas is not.  How is that incorrect?  DST in mountain time is 6 hours difference.  Show me where this is wrong Mr. Marcus…..

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel Marcus
Sent: Saturday, March 21, 2020 22:07 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off

 

incorrect CDST -5 CST -6

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] UTC Off
From: "Mike Olbrisch" <mike-2020@...>
Date: Sat, March 21, 2020 9:21 pm
To: <N3FJPSoftwareUsers@groups.io>

Agreed.  On DST, mountain time is 6 hours off UTC right now.  Normally 7 in winter.  We just talked to the relatives in Germany a few hours ago, 4pm here was 11pm there, and presently they are UTC +1.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Neil Macklem via Groups.Io
Sent: Saturday, March 21, 2020 20:13 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off

 

Hi Dale,

 

If you computer is showing CDST as -6 hours from UTC, something is amiss with the settings. 

 

CDST is 5 hours behind UTC. CST is 6 hours behind. Here in EDST we are 4 hours behind UTC, when on standard time we are -5 hours.

 

Neil

VE3SST 

 

On Sat, 21 Mar 2020 at 21:36, Dale Holloway, K4EQ

I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Re: UTC Off

Mel Marcus
 

incorrect CDST -5 CST -6

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] UTC Off
From: "Mike Olbrisch" <mike-2020@...>
Date: Sat, March 21, 2020 9:21 pm
To: <N3FJPSoftwareUsers@groups.io>

Agreed.  On DST, mountain time is 6 hours off UTC right now.  Normally 7 in winter.  We just talked to the relatives in Germany a few hours ago, 4pm here was 11pm there, and presently they are UTC +1.
 
 
Mike – KD5KC -- El Paso -- Texas.
 
The canyons are calling, colorful and deep.  But I have promises to keep.
And miles to go still in my Jeep...   And miles to go still in my Jeep...
 
 
ADVENTURE:  The respectful pursuit of trouble.
 
 
 
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Neil Macklem via Groups.Io
Sent: Saturday, March 21, 2020 20:13 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off
 
Hi Dale,
 
If you computer is showing CDST as -6 hours from UTC, something is amiss with the settings. 
 
CDST is 5 hours behind UTC. CST is 6 hours behind. Here in EDST we are 4 hours behind UTC, when on standard time we are -5 hours.
 
Neil
VE3SST 
 
On Sat, 21 Mar 2020 at 21:36, Dale Holloway, K4EQ
I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Re: UTC Off

Mel Marcus
 

UTC is the Zulu time zone. central standard time is the Sierra time zone zulu-6, central daylight time is the romeo time zone zulu-5. so your 5 hour offset is correct

Mel
NE9A

-------- Original Message --------
Subject: [N3FJPSoftwareUsers] UTC Off
From: "Dale Holloway, K4EQ" <daleholloway@...>
Date: Sat, March 21, 2020 8:36 pm
To: N3FJPSoftwareUsers@groups.io

I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Re: UTC Off

John K9IJ
 

Uhhh Yes.

When we're in DSTthe time difference between CDT and UTC is only 5 hours.
If your Win 10 clocks are showing a six hour difference, that's wrong. I'm in the
Central time zone It's currently 02:20 UTC and 21:20 CDT. 5 hours difference.

John - K9IJ

On 3/21/2020 8:36 PM, Dale Holloway, K4EQ wrote:
I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ

-- 
No trees were killed in the sending of this message. However, a large number of electrons were terribly inconvenienced !

k9ij@...
Webmaster, Network Admin, Janitor


Re: UTC Off

Mike Olbrisch
 

Agreed.  On DST, mountain time is 6 hours off UTC right now.  Normally 7 in winter.  We just talked to the relatives in Germany a few hours ago, 4pm here was 11pm there, and presently they are UTC +1.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Neil Macklem via Groups.Io
Sent: Saturday, March 21, 2020 20:13 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] UTC Off

 

Hi Dale,

 

If you computer is showing CDST as -6 hours from UTC, something is amiss with the settings. 

 

CDST is 5 hours behind UTC. CST is 6 hours behind. Here in EDST we are 4 hours behind UTC, when on standard time we are -5 hours.

 

Neil

VE3SST 

 

On Sat, 21 Mar 2020 at 21:36, Dale Holloway, K4EQ

I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Re: UTC Off

Neil Macklem
 

Hi Dale,

If you computer is showing CDST as -6 hours from UTC, something is amiss with the settings. 

CDST is 5 hours behind UTC. CST is 6 hours behind. Here in EDST we are 4 hours behind UTC, when on standard time we are -5 hours.

Neil
VE3SST 


On Sat, 21 Mar 2020 at 21:36, Dale Holloway, K4EQ
<daleholloway@...> wrote:
I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


UTC Off

Dale Holloway, K4EQ
 

I'm sure I'm missing something obvious but, nevertheless, I'm missing it. I live in the Central time zone and just discovered that my log is displaying a 5-hour difference between UTC and CDST. The difference should be 6 hours. My Windows 10 settings are correct. I display two clocks on the computer, one Central Daylight and one UTC, and they correctly display a 6-hour difference between them. But, when my computer displays 0200 UTC, my log displays 0100 UTC. I cannot find a setting in ACLog to change this. I assume this problem began when Daylight Savings Time kicked in. What am I missing here?

Dale, K4EQ


Re: Auto-Incrementing Serial Numbers in ACL

Chuck Chamblee, W4LAC
 

Thanks!  I found a simple incrementing counter app for iPhone.
--
73,
W4LAC


Re: AC Log Contact record doesn't seem to have my call sign in the QSO records

Jim Shorney
 

Some services like to see the callsign in the STATION_CALLSIGN ADIF field. ACL does not include this in the ADIF. It is included in the OPERATOR field, which is defined in the ADIF spec as being the operator callsign and what you should enter into the Operator box under Setup. Normally the two calls would be the same, but the two tags allow for operator tracking in scenarios of special event calls, multi-op, or guest operator.

73

-Jim
NU0C


On Sat, 21 Mar 2020 09:00:09 -0400
"Larry Banks via Groups.Io" <larryb.w1dyj=verizon.net@groups.io> wrote:

Hi Steve,

I don’t know were you are uploading to, but when uploading to LoTW it uses your certificate.

73 -- Larry -- W1DYJ



From: Steve Wilson via Groups.Io
Sent: Saturday, March 21, 2020 0:50
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] AC Log Contact record doesn't seem to have my call sign in the QSO records

That doesn't make sense to me. In Settings > Setup..., the first field under Common Fields is the Call sign. I would then expect the call sign to be part of the records. Maybe it is added on the fly when uploading.

Thanks, Steve K6WW



Re: Is there a way to integrate N3FJP AC Log and WSJT-X?

Jim Shorney
 

See https://github.com/dslotter/wsjtx_to_n3fjp .


A simple Python script that works very well under Windows and Linux. Requires Python.

73

-Jim
NU0C


On Fri, 20 Mar 2020 21:53:48 -0700
"Steve Wilson via Groups.Io" <steve_wilson=yahoo.com@groups.io> wrote:

Is there a way to integrate N3FJP AC Log and WSJT-X so as not to have to manually export and import contacts. Would love to have WSJT-X log directly to AC Log!

Thanks, Steve  K6WW

P.S. I did a search on FT8, but I didn't find it helpful to find a bunch of subject lines of just "FT8" and no context. More qualified subject lines are helpful to all. :-)



Re: history

Matt Thomas W5MT
 

Rino,

I know what you're looking for and I have resolved it myself.  Firstly, if you have prior CWOps contest logs saved, you can reopen each of those and select the History files as Scott described earlier and then exit the program; the program will add all the QSO info from that file into ContestHistory.txt.  Repeat that for any additional CWOps (or any N3FJP contest log you have) and the info from each those will be added and the file continue to build as Scott stated.  As ContestHistory very conveniently simply overwrites new data on top of the prior with each new contest, make sure you do this from oldest file to newest so that when done, you have the latest data for everyone in your ContestHistory file.

OR

What you can do is create your own ContestHistory.txt file.  If you're reasonably proficient Excel, you can create your own ContestHistory.txt file from the N3FJP file.  You will need to download from CWOps their membership roster into an Excel file.  From there, get rid of all but callsign, name and CWOps#.  Save a copy of the N3FJP ContestHistory.txt under a different name; this is what you'll use to modify to include all the CWOps member info.  Open the file in Excel.  Very carefully study the format of the ContestHistory.txt, the organization of the columns, the formatting (I think all text is in ""; can't recall now).  You can place all the info from the CWOps membership roster into the appropriate ContestHistory.txt column; you can add this to the bottom of the ContestHistory rows (you'll sort later).  Make sure you enter a date in correct format in the Date column.  When you have all the callsigns in the callsign column, name in name, CWOps# in CWOps column, then select All and sort on callsign.  You WILL have to review ALL the listings, looking for any dupes (two rows with same callsign), you'll need to copy and paste the CWOps info into the N3FJP listing for each of these duplicate callsigns, then delete the unneeded row.  Go through all of it.  When you're done, save as a .txt. file making sure any "" are in the correct place etc. (this is always the trickiest part for me); if I recall, I think I may have to use the CONCATENATE function in Excel.  If happy with all, again copy the original ContestHistory.txt file to a safe location and rename your file ContestHistory.txt and save it.  Open a CWT contest log and enter a few callsigns you know are CWOps and make sure the name and # auto-fill into the correct fields.  It's a little tedious, but once you do it the first time, updating it every few months to pick up new members is much easier.

Hope this helps.
73
Matt
W5MT
CWOps #1868


Re: Auto-Incrementing Serial Numbers in ACL

Larry Banks
 

Hi Chuck,
 
You don’t mention what contest you are in, but in general it’s much better and easier to use Scott’s contest software if one is available.  When one isn't available for the few small contests I am in, I just use a homebrew spreadsheet.

73 -- Larry -- W1DYJ

 

Sent: Saturday, March 21, 2020 12:39
Subject: [N3FJPSoftwareUsers] Auto-Incrementing Serial Numbers in ACL
 
Is there a mechanism in ACLogger that can display a resettable and incrementing "serial number", with the number incrementing each time I hit the "LOG CONTACT" button? Currently I'm jotting down incrementing numbers for use as exchanges for some of the contest QSO's that I'm making, and there has to be a better way of doing that.

--
73,
W4LAC


Auto-Incrementing Serial Numbers in ACL

Chuck Chamblee, W4LAC
 

Is there a mechanism in ACLogger that can display a resettable and incrementing "serial number", with the number incrementing each time I hit the "LOG CONTACT" button? Currently I'm jotting down incrementing numbers for use as exchanges for some of the contest QSO's that I'm making, and there has to be a better way of doing that.

--
73,
W4LAC


Re: IC-7300 vs Dell running XP

kc6mie
 

You are spot on, thanks.  I’ll start looking.

Stephen Spencer

On Mar 21, 2020, at 7:27 AM, Jeff Steinkamp <n7yg@...> wrote:

 Windows XP has been dead for a very long time and Windows 7 just discontinued all support.  Drivers are now required to be digitally signed and Windows XP does not have the support to handle those drivers.  You have a couple of options.  First, if the computer you are using has enough horsepower -- a fast processor and the ability to cram it with 16GB of memory or better -- then you can probably run Windows 8 or 10.  Otherwise, you are probably in the market for a new computer that will support all these newer drivers, especially if the computer you are using is only 32 bit.

kc6mie wrote on 3/20/2020 20:24:
I was running a Yaesu FT-950 and a Dell desktop running XP but just replaced the FT-950 with the IC-7300.  I tried to download the USB driver from Icom but they list only Win 10, 7,8 or 10 no XP.

Any suggestions for a solution besides getting a newer computer?

Thanks,
Stephen kc6mie


--
Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477


Re: Major Log Problem

Mel Marcus
 

I once had that problem then his list all and it showed all contacts.

Mel
NE9A

-------- Original Message --------
Subject: [N3FJPSoftwareUsers] Major Log Problem
From: "Ed W2LCQ via Groups.Io" <w2lcq@...>
Date: Fri, March 20, 2020 7:27 pm
To: N3FJPSoftwareUsers@groups.io

My ACL log contains 900 entries. I imported a log from another logger in ADIF format with 500 entries into ACL. But I now have only 60 entries showing in the log. The highest number showing is 1400 which is correct but I’m missing 1,340 entries. I really don’t know what to do. How do I recover and/or restore my log? Find the missing entries and get the 500 new entries into it? This should be easy but it’s not. Help! Thanks so much. 

Best, Ed

73, Ed Jones W2LCQ

CWops 701/SKCC 5474T/FISTS 12294/LICWC 51
                      Frankford Radio Club