Date   

TQSL

Joe Pfeuffer
 

I'm at a loss maybe someone has an idea?

In the past ACLog has uploaded to TQSL without any issue.
Now I get an odd error message [below], yet the PC TQSL program works just fine.

Both use the same TQSL directory.

Ideas appreciated.

73

Error Message is:
TQSL Version 2.5.3 [v2.5.3]
Error: The selected station location could not be found
Final Status: Command Syntax Error(10)


Re: CQ-WPX: Re-sending last sequence #

Mel Marcus
 


Sounds like it could be done with an f-key  serial -1

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CQ-WPX: Re-sending last sequence #
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, June 01, 2020 12:33 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Gary,

Thanks for your e-mail.  Not at this time.  I will give that some thought for the future.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Gary Johnson via groups.io <hadadezerzobah@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jun 1, 2020 12:52 pm
Subject: [N3FJPSoftwareUsers] CQ-WPX: Re-sending last sequence #

I use the ! in my macros to automatically log rather than use ENTER to log the Q. So when I hear "NR?", I have to move my hand over to the keyer paddle to re-send that Q's sequence #, because Logger has already incremented the sequence # in preparation for the next Q. Is there any way to create a macro so a function key will send "new sequence # minus 1"?

Gary, N8LR


Re: CQ-WPX: Re-sending last sequence #

Scott Davis
 

Hi Gary,

Thanks for your e-mail.  Not at this time.  I will give that some thought for the future.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Gary Johnson via groups.io <hadadezerzobah@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jun 1, 2020 12:52 pm
Subject: [N3FJPSoftwareUsers] CQ-WPX: Re-sending last sequence #

I use the ! in my macros to automatically log rather than use ENTER to log the Q. So when I hear "NR?", I have to move my hand over to the keyer paddle to re-send that Q's sequence #, because Logger has already incremented the sequence # in preparation for the next Q. Is there any way to create a macro so a function key will send "new sequence # minus 1"?

Gary, N8LR


CQ-WPX: Re-sending last sequence #

Gary Johnson
 

I use the ! in my macros to automatically log rather than use ENTER to log the Q. So when I hear "NR?", I have to move my hand over to the keyer paddle to re-send that Q's sequence #, because Logger has already incremented the sequence # in preparation for the next Q. Is there any way to create a macro so a function key will send "new sequence # minus 1"?

Gary, N8LR


Re: Logging CQ WPX CW

Scott Davis
 

Hi Tom,

Thanks for your e-mail.  Here is a current screen shot of my log:

Capture.JPG

The last station I worked was F6IRA, Rec 350, which also happens to be QSO 350 (but doesn't have to be).

I am about to work UD4F, which I will send 351.  

Again, remember, your record number and number sent may not be the same if you deleted or edited a QSO.

If your set up is not behaving similarly, please send a screen shot along.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Tom and Toni Hauer <rdrnrtom@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, May 31, 2020 2:37 pm
Subject: [N3FJPSoftwareUsers] Logging CQ WPX CW

I am using automated keying for the contest, it is set up in settings under CW settings.  I am using a WinKeyer interface to my rig and the # as instructed for the serial number in the keying sequence ( ie. TU 5NN #  in the F3 position).  It is sending one number higher than it is actually logging in #S.  If I try to correct the log it still sends one number higher than it logs no matter what I do. 

The number shown at the bottom of the screen, for the next contact is the number it sends but the log enters one number less - no matter what I do!!

Oh, I am using TAB and ENTER to execute F2 and F3 - so if I do a search and pounce I enter the call, hit TAB (sends F2, my call) Tab again over to #R, enter the number I receive and hit ENTER to log the call and send the contents of F3.

Any ideas?  All my #S in the log appear one lower than actually sent!!

Tom Hauer, K0YA
HLARC ARES EC
319 551-9788
PO Box 1522 (mailing ADR)
11700 E FM 1431 R37
Marble Falls, Tx 78654
EM00wn
Latitude:  30.568805
Longitude:  -98.140287


Logging CQ WPX CW

Tom Hauer K0YA
 

I am using automated keying for the contest, it is set up in settings under CW settings.  I am using a WinKeyer interface to my rig and the # as instructed for the serial number in the keying sequence ( ie. TU 5NN #  in the F3 position).  It is sending one number higher than it is actually logging in #S.  If I try to correct the log it still sends one number higher than it logs no matter what I do. 

The number shown at the bottom of the screen, for the next contact is the number it sends but the log enters one number less - no matter what I do!!

Oh, I am using TAB and ENTER to execute F2 and F3 - so if I do a search and pounce I enter the call, hit TAB (sends F2, my call) Tab again over to #R, enter the number I receive and hit ENTER to log the call and send the contents of F3.

Any ideas?  All my #S in the log appear one lower than actually sent!!

Tom Hauer, K0YA
HLARC ARES EC
319 551-9788
PO Box 1522 (mailing ADR)
11700 E FM 1431 R37
Marble Falls, Tx 78654
EM00wn
Latitude:  30.568805
Longitude:  -98.140287


Re: Counties are not logging from Fldigi in the 070 TDW contest.

Scott Davis
 

Hi Jim,

Thanks for you e-mail.  The only setting in AC Log to interface with FLDigi is to enable the API.  From there, FLDigi handles all the data that is transferred, so you should touch base with the FLDigi folks on any API behaviors you would like to see FLDigi facilitate.  You will find their support group here:

https://groups.io/g/winfldigi/

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jim Ruff via groups.io <W7JHR@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, May 30, 2020 6:49 pm
Subject: [N3FJPSoftwareUsers] Counties are not logging from Fldigi in the 070 TDW contest.

Any idea why the counties are logging into Aclog from Fldigi and how might I fix it?
Thanks,
Jim


Counties are not logging from Fldigi in the 070 TDW contest.

Jim Ruff
 

Any idea why the counties are logging into Aclog from Fldigi and how might I fix it?
Thanks,
Jim


Re: Telnet spots from Gridtracker to AClog telnet

KB7ZTI
 

Thanks Scott that helped out alot


On Fri, May 29, 2020 at 1:44 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Mark,

I hope that this helps.  Where t is the new spot:

 VariablesDXSpotRecord dx = new VariablesDXSpotRecord();

 dx.dxCall = t.Substring(26, 13).ToUpper().Trim();
 dx.dxComments = t.Substring(39, 31).Trim();
 dx.dxDateTime2 = t.Substring(70, 5).Trim();

double qf = 0;
qf = StringFunctions.TryParseStringToDouble(t.Substring(FreqStart, 25 - FreqStart).Trim());
dx.dxFrequency = (qf / 1000).ToString("N4");
dx.dxFrom = t.Substring(6, FreqStart - 6).Trim();


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: KB7ZTI <kb7zti@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, May 29, 2020 3:34 pm
Subject: [N3FJPSoftwareUsers] Telnet spots from Gridtracker to AClog telnet

I have successfully created a PERL program that takes the spots showing up in the Gridtracker Callable Roaster and have them sent to AClog via the DX Spotting telnet. But I am only able to receive the first spot. Could some one please tell me (or show me a link) on just what the telnet text structure should be? i.e, length of the message should be for sending, row number for each field (call, qth, band. etc) and what is the end of message character supposed be. (i.e. a carriage return, or some special character)? 

Thank you 73
KB7ZTI
Mark



--
Mark Roles


Re: FD Question

KB5WCK
 

Thanks. That helps a bunch.


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via groups.io <SNKDavis@...>
Sent: Saturday, May 30, 2020 8:44:57 AM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] FD Question
 
Hi Jeff,

Thanks for your e-mail.  Put the club name in ARRL's web form:


Capture.JPG

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Grantham <jeff@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sat, May 30, 2020 9:27 am
Subject: [N3FJPSoftwareUsers] FD Question

I know the rules have changed and I have a question about submissions. Where in the software do we put the club call sign for aggregation?  Do we still put it on the club call sign line in the cabrillo report?



Re: FD Question

Scott Davis
 

Hi Jeff,

Thanks for your e-mail.  Put the club name in ARRL's web form:


Capture.JPG

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Grantham <jeff@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sat, May 30, 2020 9:27 am
Subject: [N3FJPSoftwareUsers] FD Question

I know the rules have changed and I have a question about submissions. Where in the software do we put the club call sign for aggregation?  Do we still put it on the club call sign line in the cabrillo report?



FD Question

KB5WCK
 

I know the rules have changed and I have a question about submissions. Where in the software do we put the club call sign for aggregation?  Do we still put it on the club call sign line in the cabrillo report?



My passwords for KA1FSX

Karl Knapp
 

PLEASE AGAIN
--
Karl Knapp
KA1FSX
Amateur Extra Class
(570)267-4969


Re: FD and JT Alert

wa3gm
 

Greg what seem to be the problem??
Works fine here 

Greg wa3gm


On May 29, 2020, at 4:58 PM, AI3KS <AI3KS.01@...> wrote:

Greg,

Did you look here?

In JTAlert:

Help > Tutorials > N3FJP Contest Logs Logging

Steve, AI3KS


Re: Telnet spots from Gridtracker to AClog telnet

Bill W0EJ
 

Ron, I have it working on my 890S, what kind of control are you talking and which N3JFP package?  You can reply to my email listed on QRZ.com if you don’t mind.

73 Bill W)EJ

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of N2RLH
Sent: Friday, May 29, 2020 15:45
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Telnet spots from Gridtracker to AClog telnet

 

Is anyone using N3FJP rig control with the Kenwood TS-890S? I can’t seem to get it to work correctly. Does anyone have the settings for the 890?

 

Thank You,

Ron/N2RLH 

 

On Fri, May 29, 2020 at 3:42 PM KB7ZTI <kb7zti@...> wrote:

I have successfully created a PERL program that takes the spots showing up in the Gridtracker Callable Roaster and have them sent to AClog via the DX Spotting telnet. But I am only able to receive the first spot. Could some one please tell me (or show me a link) on just what the telnet text structure should be? i.e, length of the message should be for sending, row number for each field (call, qth, band. etc) and what is the end of message character supposed be. (i.e. a carriage return, or some special character)? 

Thank you 73
KB7ZTI
Mark


Re: FD and JT Alert

AI3KS
 

Greg,

Did you look here?

In JTAlert:

Help > Tutorials > N3FJP Contest Logs Logging

Steve, AI3KS


Re: Telnet spots from Gridtracker to AClog telnet

Scott Davis
 

Sorry, you will need this too:

int FreqStart = 16;  //In case there is no colon


                    //See if there is a colon
                    int index = t.IndexOf(":");

                    if (index > -1 && index < 20)
                        FreqStart = index + 1;

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, May 29, 2020 4:44 pm
Subject: Re: [N3FJPSoftwareUsers] Telnet spots from Gridtracker to AClog telnet

Hi Mark,

I hope that this helps.  Where t is the new spot:

 VariablesDXSpotRecord dx = new VariablesDXSpotRecord();

 dx.dxCall = t.Substring(26, 13).ToUpper().Trim();
 dx.dxComments = t.Substring(39, 31).Trim();
 dx.dxDateTime2 = t.Substring(70, 5).Trim();

double qf = 0;
qf = StringFunctions.TryParseStringToDouble(t.Substring(FreqStart, 25 - FreqStart).Trim());
dx.dxFrequency = (qf / 1000).ToString("N4");
dx.dxFrom = t.Substring(6, FreqStart - 6).Trim();


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: KB7ZTI <kb7zti@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, May 29, 2020 3:34 pm
Subject: [N3FJPSoftwareUsers] Telnet spots from Gridtracker to AClog telnet

I have successfully created a PERL program that takes the spots showing up in the Gridtracker Callable Roaster and have them sent to AClog via the DX Spotting telnet. But I am only able to receive the first spot. Could some one please tell me (or show me a link) on just what the telnet text structure should be? i.e, length of the message should be for sending, row number for each field (call, qth, band. etc) and what is the end of message character supposed be. (i.e. a carriage return, or some special character)? 

Thank you 73
KB7ZTI
Mark


Re: Telnet spots from Gridtracker to AClog telnet

N2RLH
 

Is anyone using N3FJP rig control with the Kenwood TS-890S? I can’t seem to get it to work correctly. Does anyone have the settings for the 890?

Thank You,
Ron/N2RLH 

On Fri, May 29, 2020 at 3:42 PM KB7ZTI <kb7zti@...> wrote:
I have successfully created a PERL program that takes the spots showing up in the Gridtracker Callable Roaster and have them sent to AClog via the DX Spotting telnet. But I am only able to receive the first spot. Could some one please tell me (or show me a link) on just what the telnet text structure should be? i.e, length of the message should be for sending, row number for each field (call, qth, band. etc) and what is the end of message character supposed be. (i.e. a carriage return, or some special character)? 

Thank you 73
KB7ZTI
Mark


Re: Telnet spots from Gridtracker to AClog telnet

Scott Davis
 

Hi Mark,

I hope that this helps.  Where t is the new spot:

 VariablesDXSpotRecord dx = new VariablesDXSpotRecord();

 dx.dxCall = t.Substring(26, 13).ToUpper().Trim();
 dx.dxComments = t.Substring(39, 31).Trim();
 dx.dxDateTime2 = t.Substring(70, 5).Trim();

double qf = 0;
qf = StringFunctions.TryParseStringToDouble(t.Substring(FreqStart, 25 - FreqStart).Trim());
dx.dxFrequency = (qf / 1000).ToString("N4");
dx.dxFrom = t.Substring(6, FreqStart - 6).Trim();


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: KB7ZTI <kb7zti@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, May 29, 2020 3:34 pm
Subject: [N3FJPSoftwareUsers] Telnet spots from Gridtracker to AClog telnet

I have successfully created a PERL program that takes the spots showing up in the Gridtracker Callable Roaster and have them sent to AClog via the DX Spotting telnet. But I am only able to receive the first spot. Could some one please tell me (or show me a link) on just what the telnet text structure should be? i.e, length of the message should be for sending, row number for each field (call, qth, band. etc) and what is the end of message character supposed be. (i.e. a carriage return, or some special character)? 

Thank you 73
KB7ZTI
Mark


Telnet spots from Gridtracker to AClog telnet

KB7ZTI
 

I have successfully created a PERL program that takes the spots showing up in the Gridtracker Callable Roaster and have them sent to AClog via the DX Spotting telnet. But I am only able to receive the first spot. Could some one please tell me (or show me a link) on just what the telnet text structure should be? i.e, length of the message should be for sending, row number for each field (call, qth, band. etc) and what is the end of message character supposed be. (i.e. a carriage return, or some special character)? 

Thank you 73
KB7ZTI
Mark