Date   

Re: Yaesu FTdx101MP

Scott Davis
 

Hi Jeff,

Thanks for your e-mail.  My software is designed for logging, not full rig interface, but it performs the essentials of reading frequency and mode, as well as being able to change frequency by clicking on a DX spot, etc.  You will find the Yaesu 101 MP configuration details here:


All my software is free to try and fully functional.  Please give it a try and see what you think!

Thanks for your interest in my software!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Oberg <bucket@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Aug 4, 2020 6:49 pm
Subject: [N3FJPSoftwareUsers] Yaesu FTdx101MP

Does your software display both main and sub band information.  Does it cover all the functions of the FTdx101MP?


Re: FT-2000 and ACLOG

Scott Davis
 

Hi Joe,

Thanks for your e-mail.  I don't know what you mean when by the Settings > Rig Interface > Transmit tree.  After the Rig Interface form appears, there is a Send button, so I am guessing that is what you are referring to, which just sends the designated frequency to the rig.

I don't have any Yaesu equipment myself, but you will find the successful settings other Yaesu 2000 users have sent along here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: J V <K1vmt@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Aug 4, 2020 6:25 pm
Subject: [N3FJPSoftwareUsers] FT-2000 and ACLOG

Hello,
I am running a Yaesu FT-2000.
I have ACLOG loaded on my computer.
ACLOG loads OKAY, But when I go to settings and select rig interface and Transmit set up it
won't bring up screen, goes back to log screen. So I Can't get to the FT-2000.
Probably something simple..
It's working fully on N1MM..
Any Suggestions...
Thanks
Joe


Re: FT-2000 and ACLOG

J V
 

I should of added to last post that I am using Timewave Navigator interface.

Also Windows 10..

Joe
K1VMT


Yaesu FTdx101MP

Jeff Oberg <bucket@...>
 

Does your software display both main and sub band information.  Does it cover all the functions of the FTdx101MP?


Re: Tagging Contacts for QSL

Mel Marcus
 

is there such a thing as a download from club log?

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Tagging Contacts for QSL
From: "Mitch NW0M" <nw0m@...>
Date: Tue, August 04, 2020 6:42 pm
To: N3FJPSoftwareUsers@groups.io

I just put a 'C' (for Card) in the Rec Conf By and/or Sent Conf By.  And if it has already been confirmed by LOTW with an 'L', I add the 'C' at the beginning so 'CL' is stored in those two fields.  

You could then sort the column by Rec Conf By, and create QSL labels for ones that don't have a 'C' in the Sent Conf By.

For example in Rec Conf By:
  • Blank = no QSL
  • 'L' = LOTW QSL
  • 'C' = Card QSL
  • 'CL' = LOTW and Card QSLs

Good luck.

73, Mitch
 


FT-2000 and ACLOG

J V
 

Hello,

I am running a Yaesu FT-2000.

I have ACLOG loaded on my computer.

ACLOG loads OKAY, But when I go to settings and select rig interface and Transmit set up it

won't bring up screen, goes back to log screen. So I Can't get to the FT-2000.

Probably something simple..

It's working fully on N1MM..

Any Suggestions...

Thanks
Joe


Re: Tagging Contacts for QSL

Mitch NW0M
 

I just put a 'C' (for Card) in the Rec Conf By and/or Sent Conf By.  And if it has already been confirmed by LOTW with an 'L', I add the 'C' at the beginning so 'CL' is stored in those two fields.  

You could then sort the column by Rec Conf By, and create QSL labels for ones that don't have a 'C' in the Sent Conf By.

For example in Rec Conf By:
  • Blank = no QSL
  • 'L' = LOTW QSL
  • 'C' = Card QSL
  • 'CL' = LOTW and Card QSLs

Good luck.

73, Mitch
 


Re: Concerning the *.mdb file used with N3FJP software

Scott Davis
 

Hi Thomas,

Thanks for your follow up and interesting report.  No, all the programs have the exact same Access file structure, all the programs use the same section of code to create the .MDB file and they all open interchangeably here. I have no explanation why properly locating the file in the associated program's location would not work.

Attached is a copy of the file created by the Field Day software.  If you wish to experiment, I would love to hear what comes to light.  Again though, the files are absolutely identical.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Thomas Kocourek <n4fwd.ar@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Aug 4, 2020 4:29 pm
Subject: Re: [N3FJPSoftwareUsers] Concerning the *.mdb file used with N3FJP software

The sent file worked perfectly once I located it correctly within WINE. However, it would not work for ARRL Field Day, Winter Field Day, VHF & Georgia QSO Party logging in spite of locating the mdb file. I can assume that the internal structure is different depending on the logging application.
Would it be too much to ask for help with those versions of N3FJP software. I plan to register my copies once I have them working in Linux. No point in registering if the software is broken due to misplaced/incorrect files.

On Fri, Jul 31, 2020 at 3:32 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Thomas,

Thanks for your e-mail.  Attached is a properly structured, blank .mdb file.

Click File > Show File Locations to see where the software is looking for the file in Linux.

In Windows the default is as follows, but I suspect Wine will map it differently:

C:\Users\snkda\My Documents\Affirmatech\N3FJP Software\ACLog\LogData.mdb

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Thomas Kocourek <n4fwd.ar@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Jul 31, 2020 3:22 pm
Subject: [N3FJPSoftwareUsers] Concerning the *.mdb file used with N3FJP software

I run N3FJP software under WINE in Linux. When I start up N3FJP, it complains about not seeing / or accessing the mdb database file. I found a tool to create a new mdb database file under Linux.
Question 1) In a Windows system, where does the mdb file reside for N3FJP software? <<< so I can place it in the proper place within the WINE structure
Question 2) What would be the table structure necessary for N3FJP to properly use the mdb database file? 


Tagging Contacts for QSL

VE3QN
 

I think I've got AC Log's features for marking QSO's and their confirmation status clear. Now, while I now use LoTW for most confirmations I will still want to send the odd paper QSL. Also, I wish to mark QSO's where I have received a paper QSL for printing labels later. I do paper QSL's in batches dictated by printing label sheets of 14 labels at a time. My question is: Is there a way to tag a contact such that I can later do a sort on my log and bring up the contacts I wish to print QSL labels for?


Re: Concerning the *.mdb file used with N3FJP software

Admin
 

The sent file worked perfectly once I located it correctly within WINE. However, it would not work for ARRL Field Day, Winter Field Day, VHF & Georgia QSO Party logging in spite of locating the mdb file. I can assume that the internal structure is different depending on the logging application.
Would it be too much to ask for help with those versions of N3FJP software. I plan to register my copies once I have them working in Linux. No point in registering if the software is broken due to misplaced/incorrect files.

On Fri, Jul 31, 2020 at 3:32 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Thomas,

Thanks for your e-mail.  Attached is a properly structured, blank .mdb file.

Click File > Show File Locations to see where the software is looking for the file in Linux.

In Windows the default is as follows, but I suspect Wine will map it differently:

C:\Users\snkda\My Documents\Affirmatech\N3FJP Software\ACLog\LogData.mdb

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Thomas Kocourek <n4fwd.ar@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Jul 31, 2020 3:22 pm
Subject: [N3FJPSoftwareUsers] Concerning the *.mdb file used with N3FJP software

I run N3FJP software under WINE in Linux. When I start up N3FJP, it complains about not seeing / or accessing the mdb database file. I found a tool to create a new mdb database file under Linux.
Question 1) In a Windows system, where does the mdb file reside for N3FJP software? <<< so I can place it in the proper place within the WINE structure
Question 2) What would be the table structure necessary for N3FJP to properly use the mdb database file? 


Re: Thinking of Scott, Kimberly and family.

Scott Davis
 

Thanks so much for your well wishes all.  The storm has pulled out of our area and we are fine.

Thanks again!  :)

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: n3fjpsoftwareusers@groups.io
Sent: Tue, Aug 4, 2020 12:31 pm
Subject: Re: [N3FJPSoftwareUsers] Thinking of Scott, Kimberly and family.

Been thru many of TS and Hurricanes. it is not so much the high wind as it is the tornadoes that are spawn. Stay dry and we will see you when it is all over but the shouting.

JoAnn Donaldson - AB8YZ 


Re: Thinking of Scott, Kimberly and family.

JoAnn Donaldson
 

Been thru many of TS and Hurricanes. it is not so much the high wind as it is the tornadoes that are spawn. Stay dry and we will see you when it is all over but the shouting.

JoAnn Donaldson - AB8YZ 


Re: Thinking of Scott, Kimberly and family.

Mike Olbrisch
 

Rgr that!   If you lose power, be sure to log in and tell us ….. <grin>.

I heard winds of 70 MPH still.  That may snap utility poles etc.  Good luck.

 

Mike.

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Tuesday, August 4, 2020 8:40 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Thinking of Scott, Kimberly and family.

 

Thanks Mike!  It is pouring with over 4" of rain already, but we aren't in a flood plane and all is well.  The winds here have been okay so far.  I loosened the lines to all my wire antennas in the woods yesterday in anticipation.  

 

It looks like just a couple more hours of storm here.

 

Thanks for thinking of us!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Mike Olbrisch <mike-2020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Aug 4, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] Thinking of Scott, Kimberly and family.

Looks like Scott & family are in the thick of it right now.  Here’s hoping it is rain and wind, exciting but just a little, and no damages.

Scott, let us know when you’re in the clear and OK.

Everyone else, check the help page first, try to be helpful where possible today to relieve Scott of the chores of running the list so he can concentrate on the passing tropical storm and the safety of family and property.

 

Lots of great answers to many problems right here.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 


Re: Thinking of Scott, Kimberly and family.

Michael Jones
 

I wish you and all who help in the storms path well.


On Aug 4, 2020, at 10:39 AM, Scott Davis via groups.io <SNKDavis@...> wrote:


Thanks Mike!  It is pouring with over 4" of rain already, but we aren't in a flood plane and all is well.  The winds here have been okay so far.  I loosened the lines to all my wire antennas in the woods yesterday in anticipation.  

It looks like just a couple more hours of storm here.

Thanks for thinking of us!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mike Olbrisch <mike-2020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Aug 4, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] Thinking of Scott, Kimberly and family.

Looks like Scott & family are in the thick of it right now.  Here’s hoping it is rain and wind, exciting but just a little, and no damages.

Scott, let us know when you’re in the clear and OK.

Everyone else, check the help page first, try to be helpful where possible today to relieve Scott of the chores of running the list so he can concentrate on the passing tropical storm and the safety of family and property.
 
Lots of great answers to many problems right here.
 
 
Mike – KD5KC -- El Paso -- Texas.
 
The canyons are calling, colorful and deep.  But I have promises to keep.
And miles to go still in my Jeep...   And miles to go still in my Jeep...
 
<image003.jpg>
 
ADVENTURE:  The respectful pursuit of trouble.
 
 
<image003.jpg>


Re: Thinking of Scott, Kimberly and family.

Scott Davis
 

Thanks Mike!  It is pouring with over 4" of rain already, but we aren't in a flood plane and all is well.  The winds here have been okay so far.  I loosened the lines to all my wire antennas in the woods yesterday in anticipation.  

It looks like just a couple more hours of storm here.

Thanks for thinking of us!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mike Olbrisch <mike-2020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Aug 4, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] Thinking of Scott, Kimberly and family.

Looks like Scott & family are in the thick of it right now.  Here’s hoping it is rain and wind, exciting but just a little, and no damages.

Scott, let us know when you’re in the clear and OK.

Everyone else, check the help page first, try to be helpful where possible today to relieve Scott of the chores of running the list so he can concentrate on the passing tropical storm and the safety of family and property.
 
Lots of great answers to many problems right here.
 
 
Mike – KD5KC -- El Paso -- Texas.
 
The canyons are calling, colorful and deep.  But I have promises to keep.
And miles to go still in my Jeep...   And miles to go still in my Jeep...
 
 
ADVENTURE:  The respectful pursuit of trouble.
 
 


Thinking of Scott, Kimberly and family.

Mike Olbrisch
 

Looks like Scott & family are in the thick of it right now.  Here’s hoping it is rain and wind, exciting but just a little, and no damages.

Scott, let us know when you’re in the clear and OK.

Everyone else, check the help page first, try to be helpful where possible today to relieve Scott of the chores of running the list so he can concentrate on the passing tropical storm and the safety of family and property.

 

Lots of great answers to many problems right here.

http://www.n3fjp.com/links-help.html

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 


Re: Upcoming CQ WW Digi Contest

Scott Davis
 

Hi Greg,

Thanks for your e-mail.  Sorry, no, all my contest software is contest specific.  More details are here:


http://www.n3fjp.com/faq.html#q73

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Greg Foster <greg.foster@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Aug 3, 2020 9:52 pm
Subject: [N3FJPSoftwareUsers] Upcoming CQ WW Digi Contest

Scott

Do you have a "module" that will work for this contest, 10m-160m logging grid squares?


Re: Check ADI File For Dupes

Scott Davis
 

Hi Michael,

Thanks for your e-mail.  Not the ADIF file specifically, but you can click File > Remove Duplicates to remove duplicates from your log file.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Tom NB5Q <tknorris0001@...>
To: N3FJPSoftwareUsers@groups.io Group Moderators <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Aug 3, 2020 11:57 pm
Subject: Re: [N3FJPSoftwareUsers] Check ADI File For Dupes

I just checked the ADIF Master program and it will SORT on the Call sign column placing the Dupes next to each other if you do not find another way to check for Dupes.

73,
Tom NB5Q

On Mon, Aug 3, 2020 at 6:14 PM Michael WA7SKG <wa7skg@...> wrote:
Is there an easy way to check an ADI file for duplicate contacts? I use
ACLog and select a bunch of contacts to export to an ADI file. I'd like
to do a quick check on the file for duplicate contacts before I submit.
Not really too hard to scan in a text editor for 10-20 contacts, but
unwieldy for a log of over 20 contacts.


--
73,
Michael WA7SKG

"Any day you do not learn one new thing is a wasted day."




Re: Check ADI File For Dupes

Tom NB5Q
 

I just checked the ADIF Master program and it will SORT on the Call sign column placing the Dupes next to each other if you do not find another way to check for Dupes.

73,
Tom NB5Q

On Mon, Aug 3, 2020 at 6:14 PM Michael WA7SKG <wa7skg@...> wrote:
Is there an easy way to check an ADI file for duplicate contacts? I use
ACLog and select a bunch of contacts to export to an ADI file. I'd like
to do a quick check on the file for duplicate contacts before I submit.
Not really too hard to scan in a text editor for 10-20 contacts, but
unwieldy for a log of over 20 contacts.


--
73,
Michael WA7SKG

"Any day you do not learn one new thing is a wasted day."




Upcoming CQ WW Digi Contest

Greg Foster
 

Scott

Do you have a "module" that will work for this contest, 10m-160m logging grid squares?

2901 - 2920 of 46028