Date   

Re: ACLOG not logging LOTW

 

 Tnx  for the e-mail. Ur program is working fine. I was not giving LOTW long enuff time to post it..
All the contacts I made on PSK showed up on LOTW..
Its working fine. I am sure LOTW is extremely busy.
73 DAVE NU4N


N3FJP Country Files - 02 November 2020

Jim Reisert AD1C
 

There are new country files for ACLog and related software by N3FJP.

To update the country files from the logging program menu, select:

Files -> Download Country Files From AD1C

You should download all three files. When done, you can re-start your
logging program.

Manual installation instructions are here:

https://www.country-files.com/n3fjp-info/

Here are the release notes:

https://www.country-files.com/n3fjp-02-november-2020/

N3FJP - 2 November 2020
Version entity is United States, K

Added/changed Entities/Prefixes/Callsigns:

* MM7CGR is Shetland Islands, *GM/s
* IQ6KX/9 is Sicily, *IT9
* 9M4JAY is East Malaysia, 9M6
* LU3HRS/Z is Antarctica, CE9 in ITU zone 73
* EA2EJO/8 is Canary Islands, EA8
* GB0CSG and GB2SBS are both Scotland, GM
* KP2X and KP2Y are both in ITU zone 7, not ITU zone 6
* KL2A is in ITU zone 8, not ITU zone 6
* KH2GM is in CQ zone 4, not CQ zone 5
* KP2X and KP2Y are both in CQ zone 4, not CQ zone 3
* KL2A is in CQ zone 5, not CQ zone 3
* AH0CC, AL8B, KH6JKL, KL3FY, KL7BB, NH6AD, NH6AJ, NL7BI, WH6DMS, WH7TR,
WP2Q and WP4QQA are all United States, K in CQ zone 3, ITU zone 6
* KH6IQD, KL3KZ and KL7FQQ are all United States, K in CQ zone 4, ITU zone 7
* KL4EJ and KP4HMR are both United States, K in CQ zone 4, ITU zone 8
* AL8A, KH2AK, KL4XR, KL7EA, KP4CMR, NH6SZ, WH6EFX, WP4MO, WP4OOI
and WP4OQH are all United States, K in CQ zone 5, ITU zone 8
* AA1AB and AG6BC are both Mariana Islands, KH0
* K1TOR, KB9YGQ, KF5JFX, N7OBR, NH2HR, W7WKS, WB1HAL, WK1K and WX0H
are all Hawaii, KH6
* KD2UVU is American Samoa, KH8
* KB8LJT, KD9QKS, KF7GCF, KI7BKQ and N7ELD are all Alaska, KL
* KG6WWV, KI5KQH and KM4ZWY are all Puerto Rico, KP4
* LU1HB/J and LU4AA/X are both Argentina, LU
* PE1BOJ/J is Netherlands, PA
* RU9CK/M is European Russia, UA
* RT30DX is European Russia, UA in ITU zone 30
* RN1M/P and RV30DX are both Kaliningrad, UA2
* R30MDXC, R9CZ/M, RM30DX and RY30DX are all Asiatic Russia, UA9
* RN3QOP/4/M is Asiatic Russia, UA9 in CQ zone 16
* RQ30DX is Asiatic Russia, UA9 in CQ zone 18, ITU zone 32
* RX30DX and RZ30DX are both Asiatic Russia, UA9 in CQ zone 19, ITU zone 34

Removed Entities/Prefixes/Callsigns:

* JW2US in Bear Island, *JW/b
* AL7A, KH6JUZ, KL7W and KP3RC in United States, K
* WD6DGS in Guam, KH2
* K7SGA in Alaska, KL
* R9CZ/M in European Russia, UA

If you have any questions, send E-mail to Jim Reisert AD1C (at the
address below) or make a post to the N3FJP software users reflector.

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us


Re: ACLOG not logging LOTW

Scott Davis
 

Hi Dave,

Thanks for your e-mail.  I'm sorry that you've run into trouble.

I'm a little confused.  AC Log won't show an L in the Sent Confirmed By field to indicate an LoTW upload (and that L can't appear without the record being successfully uploaded) until you do a subsequent download after your upload, so I am not clear what you mean by saying AC Log says it has been uploaded?

Also, FLDigi does not require a bridge to AC Log.  FLDigi will connect directly with all of my software as detailed here:

http://www.n3fjp.com/help/digitalsetup.html#fldigi

Please take us step by step through your process and we will better able to help.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave Tucker Nu4N <dwtucker19@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Nov 1, 2020 2:25 pm
Subject: [N3FJPSoftwareUsers] ACLOG not logging LOTW

Hello scott. I am using aclog with Fldigi. AClog after a qso says its been upload to LOTW.
I go to my activity page on LOTW web site.
I do a search of the call I just worked and the qso does not show up.??
Have any idea why LOTW page does not show the qso.
I tried the FLDigi brdge but the program really screws up my FLDIGI program.
Have any ideas??  Thanks
73 Dave NU4N
Oh I am using the latest version of AClog.


Re: Germany

Jeff KB6CA
 

Great story, Mike.

 

Jeff KB6CA

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Donald R Beck
Sent: November 1, 2020 08:11 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Germany

 

Great story. Thanks 

DR Beck

Toolbox Productions,Inc.



On Nov 1, 2020, at 07:56, Mike Olbrisch <mike-2020@...> wrote:



As a person who visits Germany often, and with family and many friends there, I can say that pre-unification it was the Federal Republic of Germany (FRG) in the west, and the German Democratic Republic (DDR) in the east.  The falter and decline of communism allowed for the fall of the wall/fence/border separating West from East in 1989, which allowed the free flow of citizen back and forth across the border.  Then in Mar of 1990, reunification of the two countries began.  In essence, West Germany (still known as The Federal Republic of Germany) absorbed East Germany, and The German Democratic Republic ceased to exist.

My brother-in-law Helmut-DG7NFV took me to a radio club meeting in Meiningen, right at the very border where I was once a U.S. Soldier.  Needless to say I was quite apprehensive entering former enemy territory.  All the hams there were friendly and welcoming to an American.  I found their dialect of German a little difficult, but we got on well.  But it wasn’t until the owner of the gasthaus (restaurant) came to take our dinner orders that I really learned how it was.  In my best German I made my dinner order.  The owner hesitated, then asked “American”?   Hell, where is this going I thought.  But - truth….   I answered yes.  “Soldier?” he asked.  I once was a soldier I replied.  “Where?” he asked.  I pointed out the window.  So he put his pen and paper down, took my right hand in both of his, and with tears in his eyes he thanked me for his freedom.  My eyes were not dry either.  It was a very moving experience, one that has been repeated each time I visit the club in Meiningen and activate SOTA summits in the region.

This was one time we got it right!  And Germany is still officially The Federal Republic of Germany.  The other countries, you’ll have to find people who visit them.

BTW, there are several border museums, including one near Meiningen.  I visited it once, it stirred up strong memories.

<image002.jpg>

 

<image014.jpg>

<image015.jpg>

 

<image016.jpg>

 

<image017.jpg>



Lots of memories.  Hard duty, with great troopers.  I wouldn’t change a thing.  And it found me a wife.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

<image018.jpg>

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Chuck K4RGN
Sent: Sunday, November 1, 2020 7:56 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Germany

 

Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


ACLOG not logging LOTW

 

Hello scott. I am using aclog with Fldigi. AClog after a qso says its been upload to LOTW.
I go to my activity page on LOTW web site.
I do a search of the call I just worked and the qso does not show up.??
Have any idea why LOTW page does not show the qso.
I tried the FLDigi brdge but the program really screws up my FLDIGI program.
Have any ideas??  Thanks
73 Dave NU4N
Oh I am using the latest version of AClog.


Re: Germany

Larry Stowell K1ZW
 

Thanks Mike

73 Larry K1ZW

On 11/1/2020 10:57 AM, Mike Olbrisch wrote:

As a person who visits Germany often, and with family and many friends there, I can say that pre-unification it was the Federal Republic of Germany (FRG) in the west, and the German Democratic Republic (DDR) in the east.  The falter and decline of communism allowed for the fall of the wall/fence/border separating West from East in 1989, which allowed the free flow of citizen back and forth across the border.  Then in Mar of 1990, reunification of the two countries began.  In essence, West Germany (still known as The Federal Republic of Germany) absorbed East Germany, and The German Democratic Republic ceased to exist.

My brother-in-law Helmut-DG7NFV took me to a radio club meeting in Meiningen, right at the very border where I was once a U.S. Soldier.  Needless to say I was quite apprehensive entering former enemy territory.  All the hams there were friendly and welcoming to an American.  I found their dialect of German a little difficult, but we got on well.  But it wasn’t until the owner of the gasthaus (restaurant) came to take our dinner orders that I really learned how it was.  In my best German I made my dinner order.  The owner hesitated, then asked “American”?   Hell, where is this going I thought.  But - truth….   I answered yes.  “Soldier?” he asked.  I once was a soldier I replied.  “Where?” he asked.  I pointed out the window.  So he put his pen and paper down, took my right hand in both of his, and with tears in his eyes he thanked me for his freedom.  My eyes were not dry either.  It was a very moving experience, one that has been repeated each time I visit the club in Meiningen and activate SOTA summits in the region.

This was one time we got it right!  And Germany is still officially The Federal Republic of Germany.  The other countries, you’ll have to find people who visit them.

BTW, there are several border museums, including one near Meiningen.  I visited it once, it stirred up strong memories.

 

  

Lots of memories.  Hard duty, with great troopers.  I wouldn’t change a thing.  And it found me a wife.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Chuck K4RGN
Sent: Sunday, November 1, 2020 7:56 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Germany

 

Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


Re: Germany

Donald R Beck
 

Great story. Thanks 

DR Beck
Toolbox Productions,Inc.

On Nov 1, 2020, at 07:56, Mike Olbrisch <mike-2020@...> wrote:



As a person who visits Germany often, and with family and many friends there, I can say that pre-unification it was the Federal Republic of Germany (FRG) in the west, and the German Democratic Republic (DDR) in the east.  The falter and decline of communism allowed for the fall of the wall/fence/border separating West from East in 1989, which allowed the free flow of citizen back and forth across the border.  Then in Mar of 1990, reunification of the two countries began.  In essence, West Germany (still known as The Federal Republic of Germany) absorbed East Germany, and The German Democratic Republic ceased to exist.

My brother-in-law Helmut-DG7NFV took me to a radio club meeting in Meiningen, right at the very border where I was once a U.S. Soldier.  Needless to say I was quite apprehensive entering former enemy territory.  All the hams there were friendly and welcoming to an American.  I found their dialect of German a little difficult, but we got on well.  But it wasn’t until the owner of the gasthaus (restaurant) came to take our dinner orders that I really learned how it was.  In my best German I made my dinner order.  The owner hesitated, then asked “American”?   Hell, where is this going I thought.  But - truth….   I answered yes.  “Soldier?” he asked.  I once was a soldier I replied.  “Where?” he asked.  I pointed out the window.  So he put his pen and paper down, took my right hand in both of his, and with tears in his eyes he thanked me for his freedom.  My eyes were not dry either.  It was a very moving experience, one that has been repeated each time I visit the club in Meiningen and activate SOTA summits in the region.

This was one time we got it right!  And Germany is still officially The Federal Republic of Germany.  The other countries, you’ll have to find people who visit them.

BTW, there are several border museums, including one near Meiningen.  I visited it once, it stirred up strong memories.

<image002.jpg>
 
<image014.jpg>

<image015.jpg>
 
<image016.jpg>
 
<image017.jpg>


Lots of memories.  Hard duty, with great troopers.  I wouldn’t change a thing.  And it found me a wife.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

<image018.jpg>

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Chuck K4RGN
Sent: Sunday, November 1, 2020 7:56 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Germany

 

Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


Re: Germany

Mike Olbrisch
 

As a person who visits Germany often, and with family and many friends there, I can say that pre-unification it was the Federal Republic of Germany (FRG) in the west, and the German Democratic Republic (DDR) in the east.  The falter and decline of communism allowed for the fall of the wall/fence/border separating West from East in 1989, which allowed the free flow of citizen back and forth across the border.  Then in Mar of 1990, reunification of the two countries began.  In essence, West Germany (still known as The Federal Republic of Germany) absorbed East Germany, and The German Democratic Republic ceased to exist.

My brother-in-law Helmut-DG7NFV took me to a radio club meeting in Meiningen, right at the very border where I was once a U.S. Soldier.  Needless to say I was quite apprehensive entering former enemy territory.  All the hams there were friendly and welcoming to an American.  I found their dialect of German a little difficult, but we got on well.  But it wasn’t until the owner of the gasthaus (restaurant) came to take our dinner orders that I really learned how it was.  In my best German I made my dinner order.  The owner hesitated, then asked “American”?   Hell, where is this going I thought.  But - truth….   I answered yes.  “Soldier?” he asked.  I once was a soldier I replied.  “Where?” he asked.  I pointed out the window.  So he put his pen and paper down, took my right hand in both of his, and with tears in his eyes he thanked me for his freedom.  My eyes were not dry either.  It was a very moving experience, one that has been repeated each time I visit the club in Meiningen and activate SOTA summits in the region.

This was one time we got it right!  And Germany is still officially The Federal Republic of Germany.  The other countries, you’ll have to find people who visit them.

BTW, there are several border museums, including one near Meiningen.  I visited it once, it stirred up strong memories.

 

  

Lots of memories.  Hard duty, with great troopers.  I wouldn’t change a thing.  And it found me a wife.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Chuck K4RGN
Sent: Sunday, November 1, 2020 7:56 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Germany

 

Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


Re: Germany

Scott Davis
 

Hi Chuck,

Thanks for your e-mail.  ARRL, the ADIF specification, etc., all define the country name as Federal Republic of Germany.  

https://www.adif.org/311/ADIF_311.htm

The country list AC Log (and many other programs) uses is generously maintained by Jim, AD1C.  More details on Jim's country files are here:

http://www.country-files.com/

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chuck K4RGN <K4rgn@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Nov 1, 2020 9:55 am
Subject: [N3FJPSoftwareUsers] Germany

Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


Re: Germany

Donald R Beck
 

Agreed 

DR Beck
Toolbox Productions,Inc.

On Nov 1, 2020, at 06:54, Chuck K4RGN <K4rgn@...> wrote:


Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


Germany

Chuck K4RGN
 

Perhaps the list of country names in ACLOG comes from another source, but why does the source insist on calling Germany the "Federal Republic of Germany"? Unification was 30 years ago, and if anyone still has West Germany and East Germany in their logs, "East" and "West" can keep them separate. Technically it's the "Argentine Republic", the "Republic of Austria", the "United Mexican States", the "Swiss Confederation", etc -- but we use everyday names for those countries. When sorting my contacts in ACLOG it would make more sense for Germany to come under "G" than "F".

73, Chuck, K4RGN 


Re: Band map

Scott Davis
 

Hi John,

Thanks for your e-mail.  Sorry no, but you can just press Esc to clear the fields of a QSO record you don't wish to log.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Romanec <ve4vjr@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 11:11 pm
Subject: [N3FJPSoftwareUsers] Band map

Is there a setting where the QSO fields will not get automatically populated when you click on a spot in the Band Map? A few times already I've accidentally hit enter and logged a QSO with a DX entity i have not worked and have to delete it etc. 


Re: Storing paper QSL cards

Scott Davis
 

Thanks for your thoughts and suggestions Eric!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Eric Vollnogel via groups.io <ericvollnogel@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 6:39 pm
Subject: [N3FJPSoftwareUsers] Storing paper QSL cards

To whom it may concern:

I’ve been collecting paper QSL cards and scan them into my computer.  Is there any way, maybe as an enhancement, to store images (PDFs) of the QSL cards in the N3FJP Amateur Contact Log software (perhaps has a blob in the DB)?  Would the ADIF standard even support this?

Thanks,

ERIC




Band map

John Romanec
 

Is there a setting where the QSO fields will not get automatically populated when you click on a spot in the Band Map? A few times already I've accidentally hit enter and logged a QSO with a DX entity i have not worked and have to delete it etc. 


Storing paper QSL cards

Eric Vollnogel
 

To whom it may concern:

I’ve been collecting paper QSL cards and scan them into my computer. Is there any way, maybe as an enhancement, to store images (PDFs) of the QSL cards in the N3FJP Amateur Contact Log software (perhaps has a blob in the DB)? Would the ADIF standard even support this?

Thanks,

ERIC


Re: Change Font Size

Robert Johnston N9FB
 

Scott & Larry, 

Thank you for the head's up that upgrading to AC Log 6.7 yields the answer to my problem!
Eureka, I have found it! :-)

73 Rob N9FB ..


Re: Change Font Size

Scott Davis
 

Hi Rob,

Thanks for your follow up.  You'll find AC Log 6.7 here:

http://www.n3fjp.com/aclog.html

Upgrades are free to registered users.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Robert Johnston N9FB <robj22020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 3:42 pm
Subject: Re: [N3FJPSoftwareUsers] Change Font Size

Hi Scott, 

Thanks for the reply.  I dont have that option (Change Main Form Font) you pointed me to... When i open Appearance > Colors & Fonts , here is what i see: '


please advise,
thanks Rob N9FB


Re: Change Font Size

Larry Banks
 

Hi Rob,
 
Are you running the latest version of ACLog?

73 -- Larry -- W1DYJ

 

Sent: Saturday, October 31, 2020 15:42
Subject: Re: [N3FJPSoftwareUsers] Change Font Size
 
Hi Scott,

Thanks for the reply.  I dont have that option (Change Main Form Font) you pointed me to... When i open Appearance > Colors & Fonts , here is what i see: '


please advise,
thanks Rob N9FB


Re: Change Font Size

Robert Johnston N9FB
 

Hi Scott, 

Thanks for the reply.  I dont have that option (Change Main Form Font) you pointed me to... When i open Appearance > Colors & Fonts , here is what i see: '


please advise,
thanks Rob N9FB


Re: Change Font Size

Scott Davis
 

Hi Rob,

Thanks for your e-mail.  Responses are inserted:




-----Original Message-----
From: Robert Johnston N9FB <robj22020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 12:57 pm
Subject: Re: [N3FJPSoftwareUsers] Change Font Size


Hi Scott, 
1. Is there any way to change the font of the TIME (UTC and local) -- they are too big right now and so get cut off at the bottom without fitting entirely in the field... 
(My display is a 20" monitor) 



**Click Settings > Appearance > Colors and Fonts and then click this button to adjust the font size:

BearingFont.JPG

2. I would also love to be able to make the 10-10 field wider so that it matches the width of the other fields, but can't find how to do that either. (apologies if i missed it)

**  Sorry, the field widths are currently user customizable.

3. Lastly, is there a way to choose "center" for a header like "Call" or Band?  I like to squeeze columns close together and centering the data keeps it from visually bleeding into adjacent columns . 

**  Sorry, no, the alignment is currently customizable either.

Sorry I was only one for three in answers you were hoping for Rob.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


Thanks and 73, 
Rob N9FB 

2581 - 2600 of 47135