When WSJT-X does the QSO entry into ACL, it will, more often than not, NOT include the County. When I manually enter a QSO in ACL, it will consistently include the County in the log entry. Why

You didn't ask this, but you might want to try out GridTracker with the two other programs. The three work well together. It's just a simple matter of configuring GridTracker to send it's data to ACL

Thanks for the quick reply! I will look at those options.

Hi KD8VRX, Thanks for your e-mail. In addition to the remedy I sent in my previous reply, all my contest software now has the option to either not export, or map the Operator field, if you wish to

Hi Vance, Thanks for your e-mail. I'm sorry that you've run into trouble. First try right clicking on the link and then click Save As. If that doesn't correct the problem, this FAQ will get you

Hi Steve, Thanks for your e-mail. If you don't wish to see a column at all, just go ahead and grab the right edge of the column header and then drag left until it has a 0 width. Thanks for your

Hi Jim, Thanks for your e-mail. My software obtains your default user folder path that you have specified in Windows on startup. You can change your default Windows settings as detailed here (be

Hi Maury, Thanks for your e-mail. Both marking occur simultaneously, so it sounds like the QSOs were marked in some other way than the automated function. Go ahead and do an All Data download and

Hi Bill, Thanks for your e-mail. That error message is returned from TQSL, not AC Log. Checking the option to add your station callsign on AC Log's LoTW form should correct that: If you have any

Hi Pat, Thanks for your e-mail. I'm sorry that you've run into trouble. Your Internet protection software is clamping down on the software or file. Setting the proper permissions in your protection

Bill and I seem to have a similar issue. Our club(WC8VOA) took part in NAQP using the N3FJP(NAQP) logging software. We exported all the contacts from NAQP via ADI file and imported them into the

I can't get the hyper link to work for downloading FD log. It times out. I'm using Chrome . I have tried it with Firefox also, same issue. Any help or suggestions appreciated. Thanks, KX4BI

Scott...I am taking your software (ver 6.8) for a test drive. I am migrating from DXBase2007. I like a clean log record and getting rid of unused columns, which to me are clutter. I do not want to

I have installed ACL, but 'SHOW FILE LOCATIONS" reveals that the installer keeps putting all my related files into the path C:\Users\Jim\OneDrive\Documents\Affirmatech. I can't find any way to change

I install the logbook back and don't want to install back. Second error i have. 73 Pat

Click the green Code button and select download ZIP. This will get you all the files in one ZIP file. All you really need are wsjtx_to_n3fjp.py and config but I would just unzip the whole folder to

Configuration and using it seems simple enough but I never have been able to download anything from github. I'll try later, not my favorite site to download anythign from. It never was, thanks.

Hi all I have been going through some old QSO's that don't have any confirmation on S or R ("N" showing on both). When I look at the QSO via EDIT, I see that there is an "L" on Sent Conf By and on

Only hard if you are not computer savvy: https://github.com/dslotter/wsjtx_to_n3fjp/ 73 -Jim NU0C "John Miller" <n1umjjohn@...> wrote: