|
Re: Aclog and fldigi
Scott
I tried that and i get Everything accept the power output and the signal reports....
Greg wa3gm
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
Scott
I tried that and i get Everything accept the power output and the signal reports....
Greg wa3gm
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
|
By
wa3gm
·
#39060
·
|
|
Re: Ctrl-Shift-R feature
Scott,
Thanks for clearing that up. I was wondering myself what sort of can-of-worms would be opened by adding that port on/off function to the present <Ctrl>-<Shift>-<R> function. It’s no
Scott,
Thanks for clearing that up. I was wondering myself what sort of can-of-worms would be opened by adding that port on/off function to the present <Ctrl>-<Shift>-<R> function. It’s no
|
By
Mike Olbrisch
·
#39059
·
|
|
Re: SOTA
You can do that in HamAlert however. A mobile app is also available.
73, Bob N4XU
You can do that in HamAlert however. A mobile app is also available.
73, Bob N4XU
|
By
Bob Wilson
·
#39058
·
|
|
Re: Ctrl-Shift-R feature
Hi Rick,
Thanks for your follow up. The intent of the Ctrl + Shift + R function is enable quick, manual entry of a QSO without the need to disable rig interface. Completely turning off rig
Hi Rick,
Thanks for your follow up. The intent of the Ctrl + Shift + R function is enable quick, manual entry of a QSO without the need to disable rig interface. Completely turning off rig
|
By
Scott Davis
·
#39057
·
|
|
Re: Ctrl-Shift-R feature
And those steps are exactly what I do when I switch to WSJTx.
But why not just disable the port directly in addition to the value updates with the Ctrl-Shift-R to eliminate the last three steps —
And those steps are exactly what I do when I switch to WSJTx.
But why not just disable the port directly in addition to the value updates with the Ctrl-Shift-R to eliminate the last three steps —
|
By
RICHARD SCHMIEDT
·
#39056
·
|
|
Re: SOTA
Hi Dave,
Thanks for your follow up and clarification. Not at this time. I will give that some thought for the future.
73, Scott
N3FJP
http://www.n3fjp.com
Serving the Amateur Radio community with
Hi Dave,
Thanks for your follow up and clarification. Not at this time. I will give that some thought for the future.
73, Scott
N3FJP
http://www.n3fjp.com
Serving the Amateur Radio community with
|
By
Scott Davis
·
#39055
·
|
|
Re: SOTA
Hi Scott.....If I don't know the call....just looking for someone entering the words "SOTA" in the comments field of a spot. Is that possible?
Hi Scott.....If I don't know the call....just looking for someone entering the words "SOTA" in the comments field of a spot. Is that possible?
|
By
Dave Edwards
·
#39054
·
|
|
Re: Aclog and fldigi
Is the “IN” RST and “OUT” RST populated in fldigi when you Log the contact, and send it to ACLog ?
In ACLog under “Settings>RS(T) Settings and Defaults>” . . . . . . is anything
Is the “IN” RST and “OUT” RST populated in fldigi when you Log the contact, and send it to ACLog ?
In ACLog under “Settings>RS(T) Settings and Defaults>” . . . . . . is anything
|
By
Kevin Gray <notsome1else@...>
·
#39053
·
|
|
Re: SOTA
Hi Dave,
Thanks for your e-mail. If you know the call sign(s) that you are looking for, yes. Click File > Watch List and enter the calls. Then, on the same form, in the DX Spot audio alert option,
Hi Dave,
Thanks for your e-mail. If you know the call sign(s) that you are looking for, yes. Click File > Watch List and enter the calls. Then, on the same form, in the DX Spot audio alert option,
|
By
Scott Davis
·
#39052
·
|
|
SOTA
Can I create a voice notification in AClog, when a SOTA spot comes along? In other words, filter for sota spots?
I could use some quick direction on making that happen.
Thanks all!!
Can I create a voice notification in AClog, when a SOTA spot comes along? In other words, filter for sota spots?
I could use some quick direction on making that happen.
Thanks all!!
|
By
Dave Edwards
·
#39051
·
|
|
Re: Aclog and fldigi
Hi Greg,
Thanks for your e-mail. You can click Settings > Fill Fields When Tabbing From Call so that AC Log will default to the last RST entered when tabbing from the Call field. That said, you
Hi Greg,
Thanks for your e-mail. You can click Settings > Fill Fields When Tabbing From Call so that AC Log will default to the last RST entered when tabbing from the Call field. That said, you
|
By
Scott Davis
·
#39050
·
|
|
Re: Aclog and fldigi
I’m at a loss then as mine works just fine here.
Dan Morris
dbmorris315@...
I’m at a loss then as mine works just fine here.
Dan Morris
dbmorris315@...
|
By
Dan Morris
·
#39049
·
|
|
Re: Aclog and fldigi
Yes it is checked
Greg
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
Yes it is checked
Greg
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
|
By
wa3gm
·
#39048
·
|
|
Re: Aclog and fldigi
That is the settings i have also
It puts in everything except the signal report .
Greg
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
That is the settings i have also
It puts in everything except the signal report .
Greg
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
|
By
wa3gm
·
#39047
·
|
|
Re: Aclog and fldigi
Oh, and below the box that has the ‘data stream’ make sure the little box for Enable data stream is checked as well
Dan Morris
dbmorris315@...
I live to live for Him!
Oh, and below the box that has the ‘data stream’ make sure the little box for Enable data stream is checked as well
Dan Morris
dbmorris315@...
I live to live for Him!
|
By
Dan Morris
·
#39046
·
|
|
Re: Aclog and fldigi
Go to: Configure > Contest/Logging > N3FJP Logs —
Under N3FJP logs I have address as 127.0.0.1 and Port is 1100 and make sure to the right of the button that says ‘Default’ that the box is
Go to: Configure > Contest/Logging > N3FJP Logs —
Under N3FJP logs I have address as 127.0.0.1 and Port is 1100 and make sure to the right of the button that says ‘Default’ that the box is
|
By
Dan Morris
·
#39045
·
|
|
Re: Aclog and fldigi
Dan
What settings are you using?.
Greg
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
Dan
What settings are you using?.
Greg
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone
|
By
wa3gm
·
#39044
·
|
|
CW Teacher
The one I have installed of the CW Teacher is version I guess 1.0
Is the one on the web site any newer?
Joe WB9SBD
--
The one I have installed of the CW Teacher is version I guess 1.0
Is the one on the web site any newer?
Joe WB9SBD
--
|
By
Joe WB9SBD
·
#39043
·
|
|
Re: Aclog and fldigi
Greg - My fldigi puts everything in all the data fields in ACLog!! In fact, as soon as I enter the call, all the data is filled in.
Dan Morris KZ3T
dbmorris315@...
I live to live for Him!
Greg - My fldigi puts everything in all the data fields in ACLog!! In fact, as soon as I enter the call, all the data is filled in.
Dan Morris KZ3T
dbmorris315@...
I live to live for Him!
|
By
Dan Morris
·
#39042
·
|
|
Aclog and fldigi
Scott ir anyone
I have fl digi Where it will log the qso in to AC log but it will not put in the report......
Can I make this default to 599 and then change it if I have to.
Thanks
Greg wa3gm
Sent
Scott ir anyone
I have fl digi Where it will log the qso in to AC log but it will not put in the report......
Can I make this default to 599 and then change it if I have to.
Thanks
Greg wa3gm
Sent
|
By
wa3gm
·
#39041
·
|