A couple of you have emailed me directly about my discovery that COM port settings were the root of my 10M contest module CW keying problem. I could have remedied the issue before I updated the

Choose a different DX Cluster host. VE7CC seems to be down. -- Lou WA5LOU

Same problem here...DXspots and Ve7cc...neither connect... tested my telnet and it seems to be fine...

Hi Orville, Try a different host. I noticed that ve7cc was not working this morning. 73 -- Larry -- W1DYJ

Hi Orville, Thanks for your e-mail. This FAQ will get you going: The DX Spotting telnet host I usually use is down. How do I select a different host? http://www.n3fjp.com/faq.html#q95 Enjoy! 73,

Scott, For some reason I am unable to access DX Spotting. Portions of the configuration screen are greyed out per the screenshot below. I tried upgrading from 6.5 to 6.6 and that had no effect. Any

Thanks to Scott's suggestion of a potential hardware issue behind the 10M Contest module F key CW keying issue I was having, I updated the Silicon Lab virtual COM drivers. Because of the driver

Hi Craig, Thanks for your e-mail. There is a huge list of DX spotting sites to choose from here: http://www.dxcluster.info/telnet/index.php#291 Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the

Frank, Am running CW from my computer keyboard. Goes right to the Icom virtual COM port for keying. Did update the driver, but no difference. The keyboard is wireless, so should try the wired

Seems I only have there telenet connections available now for dxspotting DXspots.com has become iffie at best one of them requires you to sign up with them and never any luck with Ve7cc has never

I’m still running it a Pat says, the condx are BAD up here in New England too ☹

Are you keying CW with your keyboard or have something like a Winkeyer?

Yeah, no... I've been writing finals for my doctoral program all week, and seem to have gotten contest days a bit muddled. I have checked the bands, and I'm hearing no one out there.

Thanks Scott

Thanks Pat I just couldn't find the right description for conditions until I read your e-mail right on 73 Larry K1ZW

Hi Craig, Thanks for your e-mail. From AC Log's menu options click Settings > Reset Columns to Default > DX Spots Widths. Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio

Dave. Hate to tell you this but the contest is half over and condx totally suck. YMMV. Pat – KZ5J

Hi Ed, Thanks for your e-mail. There have been no changes to the actual CW keying. I can't duplicate what you describe here. I'm by no means a hardware guy, but I suspect your PC's com port is

Isn't the contest next weekend? Dave

I have lost seeing the time in this section how do I fix please