Hi Tim, Thanks for your e-mail. Sorry, your CW settings don't change automatically when you change rigs. I'm sorry that I didn't have the answer that you were hoping for. Enjoy! 73,

Tnx to those that gave me hint on how to use 2 rigs, wks FB I can switch between 9700 and 7300 no problem. However the Winkeyer ports do not get loaded when I change rigs. I need port 1 to rig 1 port

Hi Ray, Thanks for your follow up. I already sent you my suggestions in this post here: https://groups.io/g/N3FJPSoftwareUsers/message/42025 In addition to the previous suggestions I've already

Hi Lou, Thanks for your e-mail. From the menu options click List > QSOs with Unconfirmed Countries / States. Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with

Thanks, Chris, I will try what you suggested. It has done this the last three times that I have used WSJT-X with JTAlert with ACL jogging. Scott, ACL is on my C: drive and it is using C: drive for

Hi Scott, In the 'awards' tab, one can see the countries/states/etc that have been worked regardless of QSL status or the entities that have been worked AND QSL received. Other than a rather painful

Well, it matters very much what versions you had and have. You cannot transfer settings from v3.x to v6.x. If you were using one of the newer versions, help is here:

Hi Terry, Thanks for your e-mail. This FAQ will get you going: I would like to backup or transfer my AC Log customized settings. Which files should I

Terry, From the N3FJP website FAQ: I would like to backup or transfer my AC Log customized settings. Which files should I copy? You will need the following files for AC Log 4.0 and later (note -

Urgent Help Needed!!! I finally got my Amateur Contest Log to transfer to a new computer with my 8,700 contacts. Now my problem is that the settings did not transfer. The complete setup of where entry

Hi Jesse…I have an illustrated step-by-step for the workings of Winkeyer and an IC-7300….you may not have that radio but the Winkeyer part will set you straight. So as I don’t clog up your

Hi Thomas, Thanks for your e-mail. There is no need to open Winkeyer from the CW set up form (and as you observed, when you exit the form it is close again anyway). The same open code is called when

Sounds good Roy. You won't be sorry. Using software specifically designed for each contest really adds to the ease and the fun! Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio

Thanks Scott, that's the answer to the "problem" if it AC Log doesn't automatically open/connect to winkeyer on startup. Just went down to the shack and verified that once AC Log opens I can hit F1

A friend of mine has a keyer that emulates winkeyer; it makes ba-deep and ba-doop sounds whenever it gets "opened" or "closed". Here's what I've observed: Opening the CW setup window closes the

Mine is interesting too. I have to go into the WinKeyer setup everytime I boot up and set the com port. Otherwise I can't open WinKeyer in the logger! Doesn't look like a log program issue,

Scott, As always, thanks for your quick answer. I now understand that many contests have different Cabrillo formats. Call me lazy, but I figured I could use my ACL software on Field Day, rather

Hi Jesse, No, you have to send at least one character from the main form (even if you previously opened the CW set up form), to initiate connection. 73, Scott N3FJP http://www.n3fjp.com Serving the

Thanks Scott, I will continue to experiment this evening. Does AC log not automatically reconnect to the winkeyer when it opens?

Hi Jesse, Thanks for your follow up. Yes, first send a character to ensure the software is connected to Winkeyer. You should then be able to use the up and down arrow keys after first sending a