Hi Scott and all... I'm primed and ready for FD 2020. I am planning to use FT8 with WSJT-X, JTAlert and N3FJP FD Logger. It's all setup, tested and ready to roll. I used the same setup (except for

Good morning Andrew. After sleeping on it last night, the only other solution I could think of is this. With ALL records selected on the button (not last 50), then click on the COUNTRY

Hi Larry, Thanks for your e-mail. I'm sorry that you have run into trouble. To clear the API error, first make sure no other programs, such as AC Log, are running and already using that port. Then

Hi Andrew, Thanks for your e-mail. Sorry, AC Log doesn't currently have any NOT logic functionality. I'm sorry that I didn't have the answer that you were looking for. Enjoy! 73,

I have a computer that will not seem to work with JT Alert and the N3FJP ARRL Field Day Logger. It gives me the error from N3FJP Field Day Logger 6.3 that says This program's server is already running

In the full log I would like it to only show my QSOs with DX stations. I can get it to show all of one country at a time, but I can't seem to use (NOT) USA. 73, Andrew K8AKC

Not quite certain just what you are asking – but if it is total countries you have worked, click AWARDS à STATES COUNTIES COUNTRIES. Add any filters in the boxes provided, like a single band or

In ACL I would like to view countries other than mine, is there a way to do this? Thanks and 73. Andrew K8AKC

Scott, Thanks for the prompt reply. Hopefully, you're getting some rest in advance of this weekend. I restarted today and all seems well with the world. 73s, Jeff, KO4DCO

H Bryan, Thanks for your follow up. Just multi select all the QSOs you want to be treated as having been uploaded from the main form. Then click Edit > Mark Selected Records as QSO > Sent and enter

Thank you, Scott. I have done as suggested and all of my entries where VE3QN is shown as Operator now show "L" in the "S Conf By" column. There are, however, a few hundred entries under my previous

Thanks for the suggestion Poul! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to

Hi Dennis, Thanks for your e-mail. Real time uploads occur within one second after pressing enter. When real time uploading is not enabled, the uploads don't occur until you initiate the

For AClog 6.6, may I suggest you change the Alt-D shortcut in LoTW Manager 1.9 from Add station location to Done? (There are 2 underlined D shortcuts) This is the way it works with the other eLog

So I installed flrig v 1.3.50. I fire it up and tell the applications to use flrig for radio type. The problem now is, flrig won't run longer than about 2 minutes before it spontaneously shuts down.

Sorry if I missed this but how long after one logs a QSO in ACLog does the software upload to LOTW and ACLog? I have had a couple of instances of logging the wrong call or QSO info, and quickly going

Hi Michael, You need to set JTAlert to automatically start WSJT-X and then N3FJP, with appropriate delays. In JTAlert: Settings >> Manage Settings >> Applications >> Auto-start. I use 1500 ms for

When I try to start JTAlert first, I get a box that says "WSJT-X must be running before JTAlert can continue." Also, all instructions regarding N3FJP say it must be running before the digital program

Not sure if I was clear. Once you get FLRig running select that as your radio in wsjtx and fldigi Get Outlook for iOS

Hi Michael, I start JTAlert and then have it start WSJT-X and then whichever N3FJP program I am using at the time, in that order. WSJT-X does the rig interfacing. 73 -- Larry -- W1DYJ