|
Re: Deleting a log database
Or just start a new database file with a different name.
73
-Jim
NU0C
"Mike Olbrisch" <mike-2020@...> wrote:
|
Or just start a new database file with a different name.
73
-Jim
NU0C
"Mike Olbrisch" <mike-2020@...> wrote:
|
By
Jim Shorney
·
#41650
·
|
|
Re: FT-* does not send DX spot
I just noticed something... when looking at VE7CC screen in the config it says Show/DX command error. I also noticed the same message on the DXspots.com screen when I tried that one. Any
|
I just noticed something... when looking at VE7CC screen in the config it says Show/DX command error. I also noticed the same message on the DXspots.com screen when I tried that one. Any
|
By
Malcolm Pelham <malcolm.pelham@...>
·
#41649
·
|
|
Re: FT-* does not send DX spot
So I noticed that my FT 8 spots are not showing up on the VE7CC cluster, but I do see them on the DX Summit. In filtering I have all continents checked and of course Enable DX spotting is checked
|
So I noticed that my FT 8 spots are not showing up on the VE7CC cluster, but I do see them on the DX Summit. In filtering I have all continents checked and of course Enable DX spotting is checked
|
By
Malcolm Pelham <malcolm.pelham@...>
·
#41648
·
|
|
Re: Deleting a log database
Click on FILE à RESET COUNTER à enter a ZERO and click OK.
This will maintain everything you have’ just delete the present log entries.
Hope that helps sir…..
Mike – KD5KC -- El Paso
|
Click on FILE à RESET COUNTER à enter a ZERO and click OK.
This will maintain everything you have’ just delete the present log entries.
Hope that helps sir…..
Mike – KD5KC -- El Paso
|
By
Mike Olbrisch
·
#41647
·
|
|
Deleting a log database
I am just beginning to use N3FJP AC logging software. While I had the trial version I imported a portion of my existing log in ADIF format. I did not pay a lot of attention to the format of the ADIF
|
I am just beginning to use N3FJP AC logging software. While I had the trial version I imported a portion of my existing log in ADIF format. I did not pay a lot of attention to the format of the ADIF
|
By
VE3QN
·
#41646
·
|
|
Re: LOTW Error
Yep that was the one. That seems to have fixed it. Thanks a bunch.
|
Yep that was the one. That seems to have fixed it. Thanks a bunch.
|
By
HamShack1@...
·
#41645
·
|
|
Re: LOTW Error
That is not what LoTW is saying. As you have more than one call, make sure that the LoTW Station Location in ACL has both the correct call and correct station location
Steve, AI3KS
|
That is not what LoTW is saying. As you have more than one call, make sure that the LoTW Station Location in ACL has both the correct call and correct station location
Steve, AI3KS
|
By
AI3KS
·
#41644
·
|
|
Re: LOTW Error
Every place I can find to have a call sign has the N4CTR call sing in it. I'm missing one someplace nut I can't find it. LOTW is using the N4CTR certificate.
|
Every place I can find to have a call sign has the N4CTR call sing in it. I'm missing one someplace nut I can't find it. LOTW is using the N4CTR certificate.
|
By
HamShack1@...
·
#41643
·
|
|
Re: LOTW Error
This QSO was uploaded on the Callsign Certificate for KO4BWH but the qso was logged with N4CTR in the Operator Field.
You either need to change the Operaor to match the callsign certificate or request
|
This QSO was uploaded on the Callsign Certificate for KO4BWH but the qso was logged with N4CTR in the Operator Field.
You either need to change the Operaor to match the callsign certificate or request
|
By
AI3KS
·
#41642
·
|
|
LOTW Error
HELP!!!!!
I have no idea what they are asking me to fix.
|
HELP!!!!!
I have no idea what they are asking me to fix.
|
By
HamShack1@...
·
#41641
·
|
|
Re: FT-* does not send DX spot
What filter settings are you speaking of?
Malcolm Pelham
WF5K
|
What filter settings are you speaking of?
Malcolm Pelham
WF5K
|
By
Malcolm Pelham <malcolm.pelham@...>
·
#41640
·
|
|
Re: N3FJP ACL doesn’t poll after using N1MM+
Steve,
7300 and N3FJP software both set to 115200 baud.
Best, Ed
73, Ed Jones W2LCQ
Frankford Radio Club
BUG 204 CWops 701 SKCC 5474T FISTS 12294 LICWC 051
“I worked for Edison but I quit. I took
|
Steve,
7300 and N3FJP software both set to 115200 baud.
Best, Ed
73, Ed Jones W2LCQ
Frankford Radio Club
BUG 204 CWops 701 SKCC 5474T FISTS 12294 LICWC 051
“I worked for Edison but I quit. I took
|
By
Ed W2LCQ <w2lcq@...>
·
#41639
·
|
|
Re: N3FJP ACL doesn’t poll after using N1MM+
Ed,
Do you have the baud rate locked down in the 7300? Maybe some confusion if it is set to Auto
Steve, AI3ks
|
Ed,
Do you have the baud rate locked down in the 7300? Maybe some confusion if it is set to Auto
Steve, AI3ks
|
By
AI3KS
·
#41638
·
|
|
FTDX-101D MAIN- SUB
Hello,
When I use the MAIN it reads the freq correctly, If I use the SUB it will keep the MAIN freq.
Is there a solution for this are my settings ?
73 Pat - ON3CQ
|
Hello,
When I use the MAIN it reads the freq correctly, If I use the SUB it will keep the MAIN freq.
Is there a solution for this are my settings ?
73 Pat - ON3CQ
|
By
Patrick Moonen
·
#41637
·
|
|
Re: FT-* does not send DX spot
Hi Malcolm,
Thanks for your e-mail. Odds are your FT8 spots are going out fine too, but your filter settings are preventing you from seeing them. Correcting your filter settings will very likely do
|
Hi Malcolm,
Thanks for your e-mail. Odds are your FT8 spots are going out fine too, but your filter settings are preventing you from seeing them. Correcting your filter settings will very likely do
|
By
Scott Davis
·
#41636
·
|
|
Re: N3FJP ACL doesn’t poll after using N1MM+
When I shut down N1MM+ and bring up either SKCC or Ham Radio Deluxe loggers they immediately poll and capture accurate band, frequency and mode data from the 7300. When I try to do the same with N3FJP
|
When I shut down N1MM+ and bring up either SKCC or Ham Radio Deluxe loggers they immediately poll and capture accurate band, frequency and mode data from the 7300. When I try to do the same with N3FJP
|
By
Ed W2LCQ <w2lcq@...>
·
#41635
·
|
|
Re: Icom IC-7200
Ed;
I tried, now we are beyond my expertise.
73
Dale K8TS
Sent from Mail for Windows 10
|
Ed;
I tried, now we are beyond my expertise.
73
Dale K8TS
Sent from Mail for Windows 10
|
By
K8TS
·
#41634
·
|
|
Re: Icom IC-7200
Yes, that is set at 76. The software worked very well with the same rig on my old laptop which died sometime back. I have a newer Dell desktop and so installed AC log on it. The rig and the
|
Yes, that is set at 76. The software worked very well with the same rig on my old laptop which died sometime back. I have a newer Dell desktop and so installed AC log on it. The rig and the
|
By
Ed Briley
·
#41633
·
|
|
Re: Icom IC-7200
Interesting.........
I looked it up on the Icom America site: Amateur>Resources>FAQ>7200>Basic Manual
Dale K8TS
|
Interesting.........
I looked it up on the Icom America site: Amateur>Resources>FAQ>7200>Basic Manual
Dale K8TS
|
By
K8TS
·
#41632
·
|
|
Re: Icom IC-7200
The manual that came with the radio has 43 pages.
Ed Briley KD0MEI Independence, MO
|
The manual that came with the radio has 43 pages.
Ed Briley KD0MEI Independence, MO
|
By
Ed Briley
·
#41631
·
|
