Here is my situation. I plan on dong the CW WPX contest. I will probably only work 40m I have a K3 with the usb interface I have all the parameters set correctly settings > transmit > cw > com 3 and

Hi Ray, AC Log 3.4 and earlier can coexist on the same PC with AC Log 4.0 and later. If you have a 3X or earlier version, you will have to uninstall that first. On the other hand, just use your

On 26 May 2020 at 18:50, Scott Davis via groups.io wrote: The installer seems to different with you. It tells me I have a version installed. > Hi Ray, > No, don't uninstall your current version. 

Ah, that was a question that I didn't see answered. If you lost the entire drive, with no files left, then you are right. If the drive is still functional at all it is possible that the file(s) could

Hi Ray, No, don't uninstall your current version. You can also install 3.4. Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging

Thanks for your thoughts and suggestions Alex! Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15:

Hi John, Thanks for your e-mail. You should use the dedicated Grid Square field, not one of the Other fields, for logging grid squares. This field will populate automatically from QRZ lookups,

On 26 May 2020 at 16:30, Scott Davis via groups.io wrote: The problem is that to install the old version I first apparently have to completely uninstall and delete the new stuff. Kind of leary to

On 26 May 2020 at 11:07, Jim Shorney wrote: But that backs up to the same drive on the same computer. That is the problem I lost the whole drive. Then only have backups of the backup files and

You don't need to use an Other field for grid. There is already a Grid field that you can move into the display area and place in the data entry area. The reason your Other field is carrying forward

Hi Scott, Thank you for the response. I don't want to disable Dx Spotting. I just want to be able to halt the scrolling at times to catch one of the spots when they scroll fast. This would be a

Hello: I finally have the grid square automatically appear on the log page in other spot 1... The problem is, the grid square doesn't display the station I'm trying to log, but it displays the grid

Hi Ray, You may have missed my previous reply. This addresses that: https://groups.io/g/N3FJPSoftwareUsers/message/41867 Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio

You didn't have the internal auto-backup of the "new" version turned on? I should think that would be a default but it has been so long since I installed I don't recall. I changed mine not long back

This situation has been very difficult to follow. Let me ask you. Had these files ever been uploaded to LoTW? Lou WA5LOU -- Lou WA5LOU

On 26 May 2020 at 9:54, Weldon Wheat wrote: OK not as specific as I should be. The main file for the old version got destroyed. And the backup system had somehow marked it as a system file that

Hi Ray, Thanks for your follow up. Under Download, Choose All Data instead of All Confirmed. Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and

On 25 May 2020 at 21:38, K4GM-George wrote: Got that to happen for the confirmed QSOs already. But can't seem to find a way to do unconfirmed ones. > If you use LOTW, download from there.  The

Thanks for the good, but bizarre report Mike (and I do remember the font debacle)! I can't imagine why that would have any affect, but I am glad you found a remedy! Enjoy! 73,

Sent from my Galaxy Tab® E