Were you uploading to LoTW or E-ask? If so you can download your log from one of them. Lou WA5LOU

Hi Scott, Thanks for the quick reply. I found the mdb file, but there's nothing in it. Can I assume that I've lost my contacts? Larry Queipo W2GJF

Scott, I notice that some Apps can send ADIF data via TCP/IP. What about adding the feature to you ACLog? That way these Apps can have access to ACLog. It doesn't have to be complicated. Just

Thanks Scott Stephen Spencer

Hi Stephen, Thanks for your e-mail. You'll find the details for interfacing JTAlert with my software here: http://www.n3fjp.com/help/digitalsetup.html That said, most digital programs that you would

I’m trying to set up the AZ out of state AC logging and with phone and CW the program reads all ok. When I switch to FT8 add in jT alert it doesn’t log. AC log reads the Band and freq. as 14.074

Hi Larry, Thanks for your e-mail. Unless you clicked Save As and gave the file a new name, you are looking for LogData.mdb. It will reside in a path something

My computer recently crashed. Stupidly, I didn't build an external backup file. However, I do have access to the hard drive from the old computer. I have downloaded the logger file, but I don't

Good advice. Baud Rates must match

Jeff, I just checked my 7300. Everything was working ok. I changed the baud rate in ACLog and experienced the same thing you have. You may want to double check both ACLog and

Here is the data copied to the clipboard Rig Name = Icom Read Frequency Command = FE FE 94 E0 03 FD Read Mode Command = FE FE 94 E0 04 FD Convert To Hex = True Com Port Name = COM3 Baud Rate =

bingo avast got it ,,,,, all good now stay safe bill This email has been checked for viruses by Avast antivirus software. www.avast.com

Hi Bill, Thanks for your e-mail. I'm sorry that you ran into trouble. Your Internet Protection Software / Windows Permission settings are blocking the PA QSO Party software from accessing the

have ACL installed wortking fine , tried to install PA QSO party and got the attached screen.. ARG///

Hi Jeff, Thanks for your e-mail. I'm sorry that you ran into trouble. You have put an alphabetic O after the E instead of a numeric 0. Replace the O with the 0 and you will be all set. FE FE 94

I updated to ACL 6.7, now my rig (ICOM 7300) is not talking to the computer correctly. I have gone through rig interface the setup again and still it does not talk fully. When I do the interface test

I will do it. Thank you.

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should

I have it working using virtual ports. Thanks for the information. Sent from Mail for Windows 10

Thanks for the information. Sent from Mail for Windows 10 From: Tanner Jones, W9TWJ Sent: Thursday, October 8, 2020 10:48 AM Subject: Re: [N3FJPSoftwareUsers] Which contest database to use?