Klaus, It is very easy to set up and works great. In AC Log make sure you have checked API. In WSJT-X make sure you have checked that it can communicate with PSKreporter. In Gridtracker, hit the

Thanks, Scott, but I cannot have this list on another screen and have my log working, I have to close the list, so I can use the log, I did a photo copy of my WAZ and WAS, etc... at ARRL LOTW . --

Hi Klaus, Thanks for your e-mail. I've not had the opportunity to try GridTracker myself, but I understand it is very easy to interface with my software. In AC Log, just click Settings > Application

Dave sent me a message this morning that he has resolved the COM port conflict. :) The RI feature made the 10 meter contest a lot easier and fun when working CW. One key to execute the FT-891 "ZIN"

Have you made any headway with satellites?

Yep, when using a satellite, just put "SAT" in the Prop Mode box and the name of satellite in the Sat box, AO-7 etc. Good luck 73 NZ3M

OK tnx…..I just have to configure the boxes in on the bottom of the call sign list…..I’ll give it a try

I want to link WSJT-X, Grid Tracker, and JTLog. Does anyone have suggestions on where to find the settings for this? 73 Klaus K6KHB

Hi Dale, Thanks for your e-mail. There is nothing in AC Log that blocks the county with Call Book lookup. If it is provided in the data source, it will be included. Enjoy! 73,

Jim, The signalink is just a sound card. If you want rig control as well, you will need to add a CI-V cable such as the RTSystems USB-RTS01. Then in the ACLog setup for

I use it for everything including sats. Very simple and non-complex. Only what I need.

I've been using your logging program on a Windows 7 laptop for some time now, but never linked it to my ICOM 706MKII transceiver. When I attempt to, under Rig - Interface - Help, my radio doesn't

Why does my ACL only fill in counties in the logsheet from time to time? Is the inclusion of the county a feature that is only enabled if the station is a paying subscriber to QRZ? That and there

I'm just getting started with satellites. I would be interested in any help here as well Thanks, Steve K4ELI

Hi Paul, Thanks for your e-mail. - When properly configured, JTAlert should always transfer the correct mode when it logs the QSO. You might want to ping the JTAlert folks on that. That said, you

Hello AClog support Very happy customer here with AClog now in use for a few months - have sent a few referrals from vk4 in your direction. Three questions from me: Sometimes an FT8 qso is not logged

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should

Hi Dave, Thanks for your follow up. Try selecting None from the keying options (assuming you are doing everything via rig interface). Otherwise, make sure your CW com port is different from your rig

Hi Scott, Well getting closer. The article was very helpful and with the Yaesu CAT Control documentation, things are becoming clearer. Here is what I am able to do. I can use the test CW F9 key in

Hi Dave, Thanks for your e-mail. You can key your 450 D, either by using a keyer such as Winkeyer connected to your rig's straight key jack, or by using rig interface commands directly via rig