This is something I would be very interested in as well. I have been trying to update the fields for SIG_INFO etc but there is now some new requirements for another field. I would pay for a POTA

Hello Scott and Kimberly (and N3FJP logging fans worldwide)! I'm relatively new to parks on the air activations for ham radio and I recently came across some issues pertaining to accurate park

I am using ur log book for FLDIGI. Uploading just fine. Why am I getting a "B" in the qsl sent rather than a "L" I go to LOTW section and it tells me I have already sent the qso. I have both EQSL and

Deni, Scott makes each contest program meet the requirements for that contest. Contest exchanges are built in and contacts are logged with the required info. After the contest,

I have the full version of ACL, but have no idea where to stick or how to make good use of the log that is setup for Nov Sweeps, any help appreciated. 73 - deni WBØTAX

Jeff, Thanks for the follow up. Just one more thing to keep in mind when things suddenly go south. 73, Steve, AI3KS

I meant to get back to everyone regarding my problem. It seems that Microsoft 10 does play nicely with the ICOM driver, in that every time Microsoft 10 does an update it kicks the ICOM driver off the

This issue is closed. Thank you.

Thank you to Dave wo2x!!!! Who called me and helped me out using a TeamViewer troubleshooting session. Always good to have a second pair of eyes when you get stuck. And he found the issue quickly.

Hi Ray, Thanks for your e-mail. When you click File > Open, only files with a .mdb extension are displayed by default, so make sure you are clicking the proper file command. If you are sure you are,

Thanks for the good report Noel! Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be

Hi Daniel, Thanks for your e-mail. I'm sorry that you've run into trouble. First, check to see that you are properly signed into the telnet host and it is functioning properly (you are seeing spots

Evening, I have several different callsigns associated with my N3FJP AC LOG program (my current and original callsigns; my wife's present and original callsigns; club callsign). I have always used the

Daniel, Check your filtering setup. I think you have spots blocked. 73, George K4GM

Daniel, try pulling the power on your pc and plugging the power cord back in. Had a similar problem the other day with a com port and the DX spotting. Pulled the power cord on the pc, put it back

I used these rig control settings for my Yaesu FT-100D with an FTDI FT232 cable I got on Amazon for $19. Yaesu 100D Rig Name = Yaesu 100D Read Frequency Command = 00 00 00 02 10 Read Mode Command

I just recently registered N2FJP. I set up DX spotting and it was working great. I closed the program and the band map is not populating, neither is the lower dx spotting list. I verified that

Thanks loads Anne! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an

I always save my contest logs using a file name appropriate for that contest, but in the future I will exit the contest log program before starting a new log. Gary, N8LR

I had quite a few popups from my AVG software telling me that it was scanning files, but after a bit of clicking, the .9 version is installed -- Anne Dirkman KC9YL See you on the