Jeff, Thanks for the follow up. Just one more thing to keep in mind when things suddenly go south. 73, Steve, AI3KS

I meant to get back to everyone regarding my problem. It seems that Microsoft 10 does play nicely with the ICOM driver, in that every time Microsoft 10 does an update it kicks the ICOM driver off the

This issue is closed. Thank you.

Thank you to Dave wo2x!!!! Who called me and helped me out using a TeamViewer troubleshooting session. Always good to have a second pair of eyes when you get stuck. And he found the issue quickly.

Hi Ray, Thanks for your e-mail. When you click File > Open, only files with a .mdb extension are displayed by default, so make sure you are clicking the proper file command. If you are sure you are,

Thanks for the good report Noel! Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be

Hi Daniel, Thanks for your e-mail. I'm sorry that you've run into trouble. First, check to see that you are properly signed into the telnet host and it is functioning properly (you are seeing spots

Evening, I have several different callsigns associated with my N3FJP AC LOG program (my current and original callsigns; my wife's present and original callsigns; club callsign). I have always used the

Daniel, Check your filtering setup. I think you have spots blocked. 73, George K4GM

Daniel, try pulling the power on your pc and plugging the power cord back in. Had a similar problem the other day with a com port and the DX spotting. Pulled the power cord on the pc, put it back

I used these rig control settings for my Yaesu FT-100D with an FTDI FT232 cable I got on Amazon for $19. Yaesu 100D Rig Name = Yaesu 100D Read Frequency Command = 00 00 00 02 10 Read Mode Command

I just recently registered N2FJP. I set up DX spotting and it was working great. I closed the program and the band map is not populating, neither is the lower dx spotting list. I verified that

Thanks loads Anne! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an

I always save my contest logs using a file name appropriate for that contest, but in the future I will exit the contest log program before starting a new log. Gary, N8LR

I had quite a few popups from my AVG software telling me that it was scanning files, but after a bit of clicking, the .9 version is installed -- Anne Dirkman KC9YL See you on the

Hi David, Thanks for your follow up. Okay, I'm relieved that you were using a relatively current version of AC Log, not a 2005 version. :) First, make sure that you are signing on to Windows with

Hi Rick, Thanks for your e-mail. In addition to the backup on close option built into AC Log, I don't know of any reason you could not copy the log as frequently as you like as well. Enjoy! 73,

Scott Version 5.3 I find LogData in a couple of places but there's nothing in there. This computer is dedicated to your logging program and was working fine when I got

auto install went trouble free

I'd like to make a copy of the log file every 'x' minutes while operating out at the park. I'd hate to lose a couple of hundred QSOs if my laptop chose the worst possible moment to die. Your