yes

Is the baud rate that high, 38.4?

Bob I have an FT-2000. Get a new serial adapter. Avoid prolific chipsets. They got counterfeited some years back. You can download new drivers from their website and a utility to detect counterfeits.

Hi Buzz, Thanks for your e-mail. The Cabrillo spec only allows for a two character mode designation. RY is used to designated RTTY and DG is used for all other digital modes. Enjoy! 73,

Hi Ken, Thanks for your e-mail. The ARRL RTTY RU software wasn't developed with this past weekend's contest in mind. That said, you can easily enter the correct values before creating the Cabrillo

In the submission file that was created by my log (RTTY Roundup Contest Log 3.7), none of the contacts listed show either FT8 or FT4 as the mode. DG is the only mode listed in the Cabrillo file. Is

Issue: Not fully communicating with Yaesu FT-2000. First off, I have been using N3FJP loggers for years and since April 2019 using a USB to RS-232 Serial Adapter. Model is the Insignia NS-PU99501

Scott, I just submitted the Ccabrillo file from your RTTY Roundup software and got the following feedback from the contest robot. They have changed the contest from a RTTY contest to an FT4/F8

Hi Steve, Thanks for your e-mail. My software will accept whatever is sent from Grid Tracker, so you will need to report your request to the Grid Tracker developer, so that Grid Tracker properly

Alas, 3.7 also doesn't successfully transfer the state from the WSJT-X output (using GridTracker) so it won't log. This is what happened with my last contact: and this is how the QSO appeared in the

Thanks Scott. Using a different browser did the trick. Have a great weekend. James AG5VE

Hi James, First try using a different browser. If that doesn't work, right click on the download link, click Save As and save the .exe to a location that is easy to find. Then, using Windows

Have you cleared your cache -- Lou WA5LOU

Larry, Yes I did. I also deleted the files from the "downloads" folder. James AG5VE

Hi James, Did you first uninstall RTTY RU using Windows Control Panel? 73 -- Larry -- W1DYJ

Scott, I just uninstalled ARRL RTTY RU, deleted the .exe file from my downloads folder and rebooted the computer Went to your website (http://www.n3fjp.com/rttyroundup.html) and downloaded the file at

Hi James, Thanks for your e-mail. Version 3.7 is currently on the web site (as of 8:18 AM EST this morning). I just double checked to make sure and 3.7 installed properly from the site here. If you

Scott, I downloaded ARRL RTTY RU per the link below, but it still shows Ver 3.6 in the header. Is this correct? Please advise. Thanks for a great suite of programs. James AG5VE

Hi Steve, Thanks for your e-mail. Version 3.6 of my ARRL RTTY RU software was released prior to the ADIF committee defining their ADIF spec to use a mode / submode scheme to transfer FT4. All of my

FT4 is a submode of MFSK as defined in the ADIF spec. The current version ADIF Master has FT4 correctly listed as a submode of MFSK. 73 -Jim NU0C "Steve Carter" <steve@...> wrote: