I need more cowbell! Jeff Freedman, K7JF Gig Harbor, Washington

Thanks, got it adjusted.-- Ryan Trullinger/Tru-Image Photography KC0QNB Gothenburg Nebraska

Hi, Thanks for your e-mail. Click Settings > Appearance > Main List Size on Form and enter your preferred size. Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with

Hi Frank, Thanks for your follow up. Details are in the CW setup text narrative on the CW setup form as follows: To enable the Tab Sends Message (TSM) option, press Ctrl + Shift + G from the main

I just configured ACL for WWFF-KFF but I also want to use the program for "normal" stuff. To do that I need more room on the screen. I really don't need to see my last 50 contacts, is there a way to

Per the ADIF spec, OPERATOR is "the logging operator's callsign", and further "if OWNER_CALLSIGN is absent, STATION_CALLSIGN shall be treated as both the logging station's callsign and the callsign of

Maybe I'm having an old age moment. I still don't get it. Are we talking about the messages stored under the F-Keys? If so I have never used shift-cntl-g. I just hit an F-Key and the message is sent.

Hi Nickus, Thanks for your e-mail. While either is fine in AC Log, some services, such as QRZ will reject the QSO record if it doesn't see a valid call sign in the Operator field (even though it will

Hi Charlie, Thanks for your e-mail. Here in the USA, since we are not in EU we only send QTCs. We don't receive them. Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community

Hi all I never really took notice of this until now. AC Log fills the operator field with my call sign but I’ve noticed one of the digital mode programs I recently started using fills the operator

Ok guys I’m going to make an effort for the first time this weekend in the WAE DX contest. I have the contest program all set and understand the whole QTC exchange protocol, etc. My question(s) here

Thanks for the report Tim. You would still likely want to disable the mode return, as your mode would actually be FT8, RTTY, PSK31, etc., but I will give that some thought for the future. Thanks

This announcement was sent in error, sorry.

I noticed this issue this weekend with the HPM Contest. Had the rig interface on, and had "Mode Determined By" Rig selected, The software would stay selected as "Phone" when I turned "Data" on in my

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should

Re installed VE7CC and spots are now being processed correctly. 73, Buzz, K3GWK

Salve Buzz, in data domenica 8 settembre 2019, alle ore 22:32, hai scritto: You have tested an other DXcluster if the issues persist? -- I migliori 73, Scrivi a:

When I click on the "SPOT LAST" block the last station worked information appears in the box. When I click on "SEND" the DX Cluster responds but no information is posted. This is a relatively new

Hi Bob, Thanks for your e-mail. When you click on a DX Spot, the frequency is gleaned from the spot post. You'll find the successful settings other Kenwood 2000 users have sent along

Hi Nickus, Thanks for your e-mail. Set your default rig as the first rig and make sure you are polling that rig when you close the rig interface form. Thanks for the audio suggestion for rig switch