Date   

Re: Contest logs - multiple counties #contest

Scott Davis
 

Hi Dave,

Thanks for your e-mail.  I could not duplicate what you describe.  I tried your sample here and it worked fine:

HEM+HOW+LRV+SVR

Capture.PNG


Enjoy!

73, Scott
N3FJP


Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: WA9PND <davel1645@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, May 21, 2022 11:25 am
Subject: [N3FJPSoftwareUsers] Contest logs - multiple counties #contest

I am aware that you can log two counties by entering "CNTY1 + CNTY2" in the county box.  Had one this morning on the county line of 4 counties - I tried to enter it as HEM+HOW+LRV+SVR and the out of state ARQP log didn't like it.  Had to close and reopen the log.  Should this work or is the multiple county function limited to two counties?  (Juliet didn't know)


Re: QSL S and R

JoAnn Donaldson
 


First put your mouse over the call and click the Right Button
   Does the QSL Sent have a check mark and does the Sent Conf By have an L
       If it does then the call has been sent to Lotw and should reflect that when you
          do the Lotw download.
       If Not then the call has Not been sent to Lotw.
    Highlight one of the calls in question.
    Then go to eLogs/Lotw.
    Then click selected contacts from main form.
    Do you get an error or does Lotw send that call to Lotw
        If you get an error then ACLog says it has been sent
        If you don't get an error then ACLog just sent that call to Lotw.
              If ACLog does the send to Lotw then wait a few minutes
                   then do the Lotw download and see if that call has chanced.

JoAnn
AB8YZ

On Saturday, May 21, 2022, 10:03:04 AM CDT, Jeff Freedman <k7jfjeff@...> wrote:


Thank you, JoAnn. I actually do your method maybe once every six months. Tried it again and with the exception of a few missed
entries, not changed. Just a long string of Ns in the R column.

Thanks again!
--
Jeff Freedman, K7JF
Gig Harbor, Washington


Contest logs - multiple counties #contest

WA9PND
 

I am aware that you can log two counties by entering "CNTY1 + CNTY2" in the county box.  Had one this morning on the county line of 4 counties - I tried to enter it as HEM+HOW+LRV+SVR and the out of state ARQP log didn't like it.  Had to close and reopen the log.  Should this work or is the multiple county function limited to two counties?  (Juliet didn't know)


Re: QSL S and R

Jeff Freedman
 

Thank you, JoAnn. I actually do your method maybe once every six months. Tried it again and with the exception of a few missed
entries, not changed. Just a long string of Ns in the R column.

Thanks again!
--
Jeff Freedman, K7JF
Gig Harbor, Washington


Re: Having trouble logging to EQF #announcement

David Tucker
 

I have tried about everything I know. Don't know if I need to reload aclog or wsjt-x? This should not be that big of a problem.
Tnx in advance for some hlep.
--

73's Dave NU4N


Re: Having trouble logging to EQF #announcement

 

I have checked the grid squares in both aclot and wsjt-x. Still not getting logged into aclog. Before this happen aclog would show the station info in the logging field . Now it does not.

Any idea?

On 5/20/2022 6:33 PM, Archibald Delfish via groups.io wrote:
If you don't have the same grid square set in WSJT-X and N3FJP, you will get a warning that call not logged.

I run N3FJP, WSJT-X and JTAlert and I start them up in that order.

If you switching between N3FJP logs or starting new logs, you have to close down and restart WSJT after N3FJP starts up, make sure the same gridsquare is set in  N3FJP and WSJT.


On May 20, 2022, at 5:50 PM, David Tucker <nu4ndave@...> wrote:

Still can't log any qso's to ACLOG even after I set all the parameters in ACLOG and WSJT-x.
--

73's Dave NU4N


--
NU4N Dave 73's


Re: Having trouble logging to EQF #announcement

Archibald Delfish
 

If you don't have the same grid square set in WSJT-X and N3FJP, you will get a warning that call not logged.

I run N3FJP, WSJT-X and JTAlert and I start them up in that order.

If you switching between N3FJP logs or starting new logs, you have to close down and restart WSJT after N3FJP starts up, make sure the same gridsquare is set in  N3FJP and WSJT.


On May 20, 2022, at 5:50 PM, David Tucker <nu4ndave@...> wrote:

Still can't log any qso's to ACLOG even after I set all the parameters in ACLOG and WSJT-x.
--

73's Dave NU4N


Re: Having trouble logging to EQF #announcement

David Tucker
 

Still can't log any qso's to ACLOG even after I set all the parameters in ACLOG and WSJT-x.
--

73's Dave NU4N


Re: Having trouble logging to EQF #announcement

David Tucker
 

Well i looked at the settings on the N3FJP website. I have them set  correctly as well and WSJ-T is set correctly. Do I know to reload ACLOG ??
Tnx for the help

--

73's Dave NU4N


Re: QSL S and R

JoAnn Donaldson
 

If you do LOTW have you had ACLog do an download? Just go to elogs/lotw. then under download click "ALL DATA". This will do an complete download of your LOTW file. It will then compare that file to your database. Everyone that has been confirmed will show in blue. Those that you have uploaded but not confirmed will be in Green.
Then setup a schedule where once a month you do a download for the preceding month. Twice a year do an download for the year. Once a year do a "All DATA" to catch those confirmations that are older than a year.

JoAnn
AB8YZ

On Friday, May 20, 2022, 10:58:15 AM CDT, Jeff Freedman <k7jfjeff@...> wrote:


Thanks, Scott. I have no (apparent) problem with the send side. Log shows I haven't received only a couple of QSLs since the beginning of the year.
--
Jeff Freedman, K7JF
Gig Harbor, Washington


Re: Having trouble logging to EQF #announcement

David Tucker
 

Yes I have EPQP with API for WST-x.. I did notice that when I am calling a station I can see that ACLG has his call sign in the logging payne  . My qrz is went correctly but now the station does not show up so therefore it won't log . It go's direct to the WSTX-X log file. Something is wrong and I am not sure. It worked yesterday nut not today?
--

73's Dave NU4N


Re: QSL S and R

Jeff Freedman
 

Thanks, Scott. I have no (apparent) problem with the send side. Log shows I haven't received only a couple of QSLs since the beginning of the year.
--
Jeff Freedman, K7JF
Gig Harbor, Washington


Re: Having trouble logging to EQF #announcement

 

Yes that is the API sent to listen for JTspots.

On 5/20/2022 8:42 AM, Ray Dabkowski wrote:
Hi Dave,

Have you looked here for interfacing N3FJP's logging software (not N3EQF!) to WSJT-x? Scroll down to the WSJT-x section.

http://www.n3fjp.com/help/digitalsetup.html

73 de W8RD
-- 
73'S DAVE NU4N

--
NU4N Dave 73's


Re: Having trouble logging to EQF #announcement

Ray Dabkowski
 

Hi Dave,

Have you looked here for interfacing N3FJP's logging software (not N3EQF!) to WSJT-x? Scroll down to the WSJT-x section.

http://www.n3fjp.com/help/digitalsetup.html

73 de W8RD


Having trouble logging to EQF #announcement

David Tucker
 

I N3EQP set to hear codes from WSJT-x. Ailso have the set up in WSJT-x as before.
Every time I make a qso it says unable to  log but saves it the logfile of WSKT-x.
Any help would be appreciated
--

73's Dave NU4N


Re: Armed Forces QSL

Christopher Scibelli
 




-----Original Message-----
From: Bob Stothfang <bobstothfang@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, May 19, 2022 6:11 pm
Subject: Re: [N3FJPSoftwareUsers] Armed Forces QSL

Here's my  belt and suspenders log path...

I log each contact to ACLog (N3FJP). Then...
I upload to LoTW at the end of the session. Then...
At the end of the day I download any confirmed or accepted LoTW files back into ACLog to update the ACLog entries. Then.....
I import the LoTW updates into my QRZ log directly from LoTW with a couple of easy key strokes. Then...
Each night when I close my ACLog it automatically saves the ACLog mdb file to my DropBox account.
Occasionally I will upload my log to eQSL for any folks that prefer that logging technique.

The mdb file in my DropBox account is my primary backup file stored offsite. If a disaster happens (i.e. Fire, theft, tornado or computer failure etc.) I can easily get my ACLog file back in the original file format that ACLog understands.

73
Bob - W8RES



I had to doublecheck to make sure I had written your message.  I basically do the same thing except I upload to eQSL after each session and I occasionally upload to QRZ for those who use that.  I also upload to Clublog after each session so I can see what I have worked, confirmed, and Verified.


Re: Armed Forces QSL

Bob Stothfang
 

Here's my  belt and suspenders log path...

I log each contact to ACLog (N3FJP). Then...
I upload to LoTW at the end of the session. Then...
At the end of the day I download any confirmed or accepted LoTW files back into ACLog to update the ACLog entries. Then.....
I import the LoTW updates into my QRZ log directly from LoTW with a couple of easy key strokes. Then...
Each night when I close my ACLog it automatically saves the ACLog mdb file to my DropBox account.
Occasionally I will upload my log to eQSL for any folks that prefer that logging technique.

The mdb file in my DropBox account is my primary backup file stored offsite. If a disaster happens (i.e. Fire, theft, tornado or computer failure etc.) I can easily get my ACLog file back in the original file format that ACLog understands.

73
Bob - W8RES



On 2022-05-19 15:26, JoAnn Donaldson via groups.io wrote:
I not only log in ACLog but also LOTW, eqSL, and QRZ.COM. If for some reason, the HD crashes, I can get a copy off one of these sites to repopulate the New ACLog.

JoAnn
AB8YZ

On Thursday, May 19, 2022, 10:24:01 AM CDT, Russ Johnson <radiok3pi@...> wrote:


Oh yeah definitely 

Too much work for that!

I keep a printed copy of contest logs as a back up 


On May 19, 2022, at 11:19 AM, Pat Whelton <pwhelton@...> wrote:



Hey Russ.  I’m like you a belt and suspenders guy.  I log to ACLog and to paper logs.  The only thing I do not log to the paper log is contests.  I just place a note in the paper log to look in ACLog for the contest contacts and import the logs.  Old school I guess.

 

Regards,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Russ Johnson
Sent: Wednesday, May 18, 2022 1:02 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Armed Forces QSL

 

I actually double log.   After it goes into N3FJP, it gets entered into ARRL Mini Log. I modify columns some and use the adjacent reverse side for comments.

 

 Stuff happens.  

 

 

On Wed, May 18, 2022 at 1:09 PM Christopher Scibelli via groups.io <nu1oscar=aol.com@groups.io> wrote:

On Wed, May 18, 2022 at 09:12 AM, Wes Stewart wrote:

The only problem has been that when I upload my log to Clublog, it protests the calls.


That will happen with any logging system setup for amateur radio.  The MARS calls use a different format.

I have some old ARRL logbooks that I used before the advent of computer logs.  I still have a few blank books.  I simply use one of those books for anything out of the ordinary.  I used it for this year's AFD QSOs.  I use it for Shortwave stations I find interesting, etc., etc.

I'm glad I bought a bunch of those books when I placed my last order, but I'm always a bit surprised by the number of hams who still write down their QSOs.  I'd have thought most everybody would be using logging programs by now, but that's not the case.

Chris  NU1O

--


“Focus on the signal… not the noise”



Re: Armed Forces QSL

JoAnn Donaldson
 

I not only log in ACLog but also LOTW, eqSL, and QRZ.COM. If for some reason, the HD crashes, I can get a copy off one of these sites to repopulate the New ACLog.

JoAnn
AB8YZ

On Thursday, May 19, 2022, 10:24:01 AM CDT, Russ Johnson <radiok3pi@...> wrote:


Oh yeah definitely 

Too much work for that!

I keep a printed copy of contest logs as a back up 


On May 19, 2022, at 11:19 AM, Pat Whelton <pwhelton@...> wrote:



Hey Russ.  I’m like you a belt and suspenders guy.  I log to ACLog and to paper logs.  The only thing I do not log to the paper log is contests.  I just place a note in the paper log to look in ACLog for the contest contacts and import the logs.  Old school I guess.

 

Regards,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Russ Johnson
Sent: Wednesday, May 18, 2022 1:02 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Armed Forces QSL

 

I actually double log.   After it goes into N3FJP, it gets entered into ARRL Mini Log. I modify columns some and use the adjacent reverse side for comments.

 

 Stuff happens.  

 

 

On Wed, May 18, 2022 at 1:09 PM Christopher Scibelli via groups.io <nu1oscar=aol.com@groups.io> wrote:

On Wed, May 18, 2022 at 09:12 AM, Wes Stewart wrote:

The only problem has been that when I upload my log to Clublog, it protests the calls.


That will happen with any logging system setup for amateur radio.  The MARS calls use a different format.

I have some old ARRL logbooks that I used before the advent of computer logs.  I still have a few blank books.  I simply use one of those books for anything out of the ordinary.  I used it for this year's AFD QSOs.  I use it for Shortwave stations I find interesting, etc., etc.

I'm glad I bought a bunch of those books when I placed my last order, but I'm always a bit surprised by the number of hams who still write down their QSOs.  I'd have thought most everybody would be using logging programs by now, but that's not the case.

Chris  NU1O

--


“Focus on the signal… not the noise”


Re: QSL S and R

Scott Davis
 

Hi Jeff,

Thanks for your follow up.  You hadn't mentioned in your initial post that you had done an All Since download.  In fact, not doing a subsequent download is the number one reason, by far, for folks not receiving confirmations.  More details on that are here:


https://www.n3fjp.com/faq.html#q32

For your records to be marked as Sent to LoTW in AC Log (L in the Sent Confirmed By field), the following criteria must be met:

1. Your records must be successfully uploaded to LoTW.
2. Your records must be successfully downloaded from LoTW
3. The callsign must match the call of the station worked.
4. The band must match the band of the station worked.
5. The date and time in AC Log must match the date and time on the LoTW record.

Note that to speed processing, once AC Log finds a match, it doesn't continue searching your log for more matches, so if you have two or more contacts with the same station on the same band at the same time (such as working county line stations in a state QSO party), only one of the QSOs will be automatically marked.  When that occurs, just edit the unmarked contact and mark it manually.

Enjoy!

73, Scott
N3FJP


Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Freedman <k7jfjeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, May 19, 2022 9:29 am
Subject: Re: [N3FJPSoftwareUsers] QSL S and R

Obviously … like several different since dates.
--
Jeff Freedman, K7JF
Gig Harbor, Washington


Re: Armed Forces QSL

Russ Johnson
 

Oh yeah definitely 

Too much work for that!

I keep a printed copy of contest logs as a back up 


On May 19, 2022, at 11:19 AM, Pat Whelton <pwhelton@...> wrote:



Hey Russ.  I’m like you a belt and suspenders guy.  I log to ACLog and to paper logs.  The only thing I do not log to the paper log is contests.  I just place a note in the paper log to look in ACLog for the contest contacts and import the logs.  Old school I guess.

 

Regards,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Russ Johnson
Sent: Wednesday, May 18, 2022 1:02 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Armed Forces QSL

 

I actually double log.   After it goes into N3FJP, it gets entered into ARRL Mini Log. I modify columns some and use the adjacent reverse side for comments.

 

 Stuff happens.  

 

 

On Wed, May 18, 2022 at 1:09 PM Christopher Scibelli via groups.io <nu1oscar=aol.com@groups.io> wrote:

On Wed, May 18, 2022 at 09:12 AM, Wes Stewart wrote:

The only problem has been that when I upload my log to Clublog, it protests the calls.


That will happen with any logging system setup for amateur radio.  The MARS calls use a different format.

I have some old ARRL logbooks that I used before the advent of computer logs.  I still have a few blank books.  I simply use one of those books for anything out of the ordinary.  I used it for this year's AFD QSOs.  I use it for Shortwave stations I find interesting, etc., etc.

I'm glad I bought a bunch of those books when I placed my last order, but I'm always a bit surprised by the number of hams who still write down their QSOs.  I'd have thought most everybody would be using logging programs by now, but that's not the case.

Chris  NU1O

--


“Focus on the signal… not the noise”

1521 - 1540 of 55629