Date   

Re: IOTA

VG M
 

I thought the question was about IOTA Contest.
If not, Rick is correct. You can track IOTA in ACLog.

73,
Matt - AF2F


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Rick <garciadc@...>
Sent: Wednesday, July 21, 2021 7:12 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] IOTA
 
Go to awards, second option.  IOTA is there to track.  Place it on your front page and it will alert you as all other  subjects. 
Rik K5TIA
 
From: VG M
Sent: Wednesday, July 21, 2021 6:02 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] IOTA
 
IOTA is not supported. I wish it was.
I use EI5DI software.
 
73,
Matt - AF2F

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Mel Marcus <melm@...>
Sent: Wednesday, July 21, 2021 2:13 PM
To: N3FJP Group <n3fjpsoftwareusers@groups.io>
Subject: [N3FJPSoftwareUsers] IOTA
 
Does anyone have any suggestions for doing IOTA with N3FJP products
 
Mel
NE9A


Re: IOTA

Rick
 

Go to awards, second option.  IOTA is there to track.  Place it on your front page and it will alert you as all other  subjects. 
Rik K5TIA
 

From: VG M
Sent: Wednesday, July 21, 2021 6:02 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] IOTA
 
IOTA is not supported. I wish it was.
I use EI5DI software.
 
73,
Matt - AF2F

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Mel Marcus <melm@...>
Sent: Wednesday, July 21, 2021 2:13 PM
To: N3FJP Group <n3fjpsoftwareusers@groups.io>
Subject: [N3FJPSoftwareUsers] IOTA
 
Does anyone have any suggestions for doing IOTA with N3FJP products
 
Mel
NE9A


Re: IOTA

VG M
 

IOTA is not supported. I wish it was.
I use EI5DI software.

73,
Matt - AF2F


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Mel Marcus <melm@...>
Sent: Wednesday, July 21, 2021 2:13 PM
To: N3FJP Group <n3fjpsoftwareusers@groups.io>
Subject: [N3FJPSoftwareUsers] IOTA
 
Does anyone have any suggestions for doing IOTA with N3FJP products

Mel
NE9A


Re: N3FJP Country Files - 21 July 2021

Pat Whelton
 

Fred.  I received three (3) email’s alerting me to and update to the countries list.  One of these emails refers to the DX4WIN program, one refers to ACLog and the other refers to the Country Files.  In addition every time I receive these three (3) emails I also receive an email from N3FJP alerting me to the change.

 

Perhaps you have been deleting these emails?

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Fred, W9KEY
Sent: Wednesday, July 21, 2021 3:41 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] N3FJP Country Files - 21 July 2021

 

Jim - thanks for posting and your continuing work maintaining the list!!  Much appreciated!

As a suggestion to Scott - It would be "nice" if there was some type of automatic AC Log alert generated, advising each time a new Country File was available.

I'm guessing the vast majority of AC Log users probably get that file during their initial program setup --- but never think about or realize newer versions might be available.
I know I didn't until seeing your recent reminders in this Groups.io forum.  I was probably using a 12-18 month old file.  For those just reading this for the first time - Entering "VERSION" into the Call Sign field, followed by the TAB key returns the version file country code name (now "Vanuatu") - then don't forget to hit "ESC" to avoid entering that as a logged QSO.

73 ..... Fred,  W9KEY


Re: Suggest Feature Addition: Expand Recent Contacts (Listed Items)

Larry Banks
 

Hi Fred,
 
You can change the “Last 50” to whatever you wish.  I keep mine at “Last 500.”
 
LIST >> Set List Default Count.

73 -- Larry -- W1DYJ

 
 

Sent: Wednesday, July 21, 2021 17:05
Subject: [N3FJPSoftwareUsers] Suggest Feature Addition: Expand Recent Contacts (Listed Items)
 
Hi Scott - In addition to the existing "Last 50" or "ALL" buttons (top right of main screen), I'd like to have a few more options - perhaps "Last 100", "Last 250", and even maybe "Last 1000".

I'm still a pretty new ham - 3 years now - but approaching 16,000 contacts my Win 10 shack computer is running a pretty old AMD-A10-5700 processor.  I often want to look back farther than only the Last 50 records, but selecting "ALL" results in a 12 second update delay - which will only get worse as my database grows in size.  Having a few more options would sure be nice!

Thanks for considering my request.
73 ..... Fred,  W9KEY


Re: Suggest Feature Addition: Expand Recent Contacts (Listed Items)

Mike Seguin
 

Under List
Select Set List Default Count

Mike

On 7/21/2021 5:05 PM, Fred, W9KEY wrote:
Hi Scott - In addition to the existing "Last 50" or "ALL" buttons (top right of main screen), I'd like to have a few more options - perhaps "Last 100", "Last 250", and even maybe "Last 1000".
I'm still a pretty new ham - 3 years now - but approaching 16,000 contacts my Win 10 shack computer is running a pretty old AMD-A10-5700 processor.  I often want to look back farther than only the Last 50 records, but selecting "ALL" results in a 12 second update delay - which will only get worse as my database grows in size.  Having a few more options would sure be nice!
Thanks for considering my request.
73 ..... Fred,  W9KEY
--
73,
Mike, N1JEZ
"A closed mouth gathers no feet"


Suggest Feature Addition: Expand Recent Contacts (Listed Items)

Fred, W9KEY
 

Hi Scott - In addition to the existing "Last 50" or "ALL" buttons (top right of main screen), I'd like to have a few more options - perhaps "Last 100", "Last 250", and even maybe "Last 1000".

I'm still a pretty new ham - 3 years now - but approaching 16,000 contacts my Win 10 shack computer is running a pretty old AMD-A10-5700 processor.  I often want to look back farther than only the Last 50 records, but selecting "ALL" results in a 12 second update delay - which will only get worse as my database grows in size.  Having a few more options would sure be nice!

Thanks for considering my request.
73 ..... Fred,  W9KEY


Re: N3FJP Country Files - 21 July 2021

Fred, W9KEY
 

Jim - thanks for posting and your continuing work maintaining the list!!  Much appreciated!

As a suggestion to Scott - It would be "nice" if there was some type of automatic AC Log alert generated, advising each time a new Country File was available.

I'm guessing the vast majority of AC Log users probably get that file during their initial program setup --- but never think about or realize newer versions might be available.
I know I didn't until seeing your recent reminders in this Groups.io forum.  I was probably using a 12-18 month old file.  For those just reading this for the first time - Entering "VERSION" into the Call Sign field, followed by the TAB key returns the version file country code name (now "Vanuatu") - then don't forget to hit "ESC" to avoid entering that as a logged QSO.

73 ..... Fred,  W9KEY


Comments not showing up. #aclog

 

Hey Scott and Kimberly. I was uploading some qso's to qrz today. When I do the export I include comments but they are not showing up in my qrz logbook.
Is it qrz the problem??

--
NU4N Dave 73's


Re: Suggestion for a timestamp on the ACLog LoTW Manager 1.9 form #aclog #lotw

Pat Whelton
 

Hi John.  Just a suggestion for checking when your LoTW download is ready:

 

  • Log on to ARRL.COM
  • Go to LoTW and log on to LoTW
  • Click “Your Account”
  • Click “Your Activity”
  • It will show time and date of last upload

 

Based on this information you will know it’s time to do an “All Since” and bring your log up to date.

 

Regards,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of John Huber
Sent: Wednesday, July 21, 2021 12:45 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Suggestion for a timestamp on the ACLog LoTW Manager 1.9 form #aclog #lotw

 

Scott / N3FJP,

As part of a future release after ACLog 7.0.1.6, please consider adding a time stamp on the final message from ACLog after an upload from the LoTW Manager 1.9 form. 

For example, prefix the "Nothing is changed in your log immediately following an upload ..." text with HH:MM:SS so it would read, for example, "12:34:56 Nothing is changed in your log immediately following an upload ...". 

The reason I think this change would be useful is to be able to:

1.  Upload to LoTW.

2.  Check the LoTW Queue - using

3.  Observe the approximate queue processing delay which might be the "ago" value in the "Currently Processing Log Uploaded" column of the LoTW queue query report.  I know this "ago" value can vary during the hour between postings.

4.  WAIT for at least Upload time + the "ago" interval.

5.  Download from LoTW.


Following this process will allow users to guesstimate when their recently uploaded QSO records will be available for download and avoid unnecessary traffic on the LoTW servers.

If the last upload to LoTW date and time happens to be saved somewhere in ACLog data, adding a line to the standard text displayed when opening the LoTW manager form that says something like "Your last upload was on dd-mmm-yyyy at hh:mm:ss." would be useful too for those times when LoTW queue gets many hours long and a user has closed the form after the upload.

Thanks for considering this request.

73,  John / N8FYL


IOTA

Mel Marcus
 

Does anyone have any suggestions for doing IOTA with N3FJP products

Mel
NE9A


Re: Suggestion for a timestamp on the ACLog LoTW Manager 1.9 form #aclog #lotw

Larry Banks
 

Hi John,
 
Something you might want to do to take care of this.  Whenever I upload to LoTW, I keep a simple log:
 
date    UTC    #_uploaded    (after download):     Total # in log    Total # conformed
 
This way I can always refer back to my upload history if need be.  It also allows me to check that all Qs uploaded are in the LoTW dB.

73 -- Larry -- W1DYJ

 

From: John Huber
Sent: Wednesday, July 21, 2021 13:45
Subject: [N3FJPSoftwareUsers] Suggestion for a timestamp on the ACLog LoTW Manager 1.9 form #aclog #lotw
 
Scott / N3FJP,

As part of a future release after ACLog 7.0.1.6, please consider adding a time stamp on the final message from ACLog after an upload from the LoTW Manager 1.9 form. 

For example, prefix the "Nothing is changed in your log immediately following an upload ..." text with HH:MM:SS so it would read, for example, "12:34:56 Nothing is changed in your log immediately following an upload ...". 

The reason I think this change would be useful is to be able to:
1.  Upload to LoTW.
2.  Check the LoTW Queue - using
3.  Observe the approximate queue processing delay which might be the "ago" value in the "Currently Processing Log Uploaded" column of the LoTW queue query report.  I know this "ago" value can vary during the hour between postings.
4.  WAIT for at least Upload time + the "ago" interval.
5.  Download from LoTW.

Following this process will allow users to guesstimate when their recently uploaded QSO records will be available for download and avoid unnecessary traffic on the LoTW servers.

If the last upload to LoTW date and time happens to be saved somewhere in ACLog data, adding a line to the standard text displayed when opening the LoTW manager form that says something like "Your last upload was on dd-mmm-yyyy at hh:mm:ss." would be useful too for those times when LoTW queue gets many hours long and a user has closed the form after the upload.

Thanks for considering this request.

73,  John / N8FYL


Suggestion for a timestamp on the ACLog LoTW Manager 1.9 form #aclog #lotw

John Huber
 

Scott / N3FJP,

As part of a future release after ACLog 7.0.1.6, please consider adding a time stamp on the final message from ACLog after an upload from the LoTW Manager 1.9 form. 

For example, prefix the "Nothing is changed in your log immediately following an upload ..." text with HH:MM:SS so it would read, for example, "12:34:56 Nothing is changed in your log immediately following an upload ...". 

The reason I think this change would be useful is to be able to:
1.  Upload to LoTW.
2.  Check the LoTW Queue - using
3.  Observe the approximate queue processing delay which might be the "ago" value in the "Currently Processing Log Uploaded" column of the LoTW queue query report.  I know this "ago" value can vary during the hour between postings.
4.  WAIT for at least Upload time + the "ago" interval.
5.  Download from LoTW.

Following this process will allow users to guesstimate when their recently uploaded QSO records will be available for download and avoid unnecessary traffic on the LoTW servers.

If the last upload to LoTW date and time happens to be saved somewhere in ACLog data, adding a line to the standard text displayed when opening the LoTW manager form that says something like "Your last upload was on dd-mmm-yyyy at hh:mm:ss." would be useful too for those times when LoTW queue gets many hours long and a user has closed the form after the upload.

Thanks for considering this request.

73,  John / N8FYL


Re: Flex 6600 API Interface #setup

JoAnn Donaldson
 

I have found using the TS-2000 setting and Comm Port 4 (default on Flex) at 38KBaud worked the best.

JoAnn
AB8YZ

On Monday, July 19, 2021, 10:08:30 PM CDT, Dave wo2x <rocketnj@...> wrote:


If you are trying to make the API connection work remote, it won’t. The Flex UDP broadcast traffic on port 4992 will not be forwarded to your remote site where N3FJP is running.

It only works for logging program local to the radio (same subnet).

 

Dave wo2x

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Jack Di Palo
Sent: Monday, July 19, 2021 10:18 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Flex 6600 API Interface #setup

 

Thank you all for the suggestions. I’ll try them when I’m back on-site, but for today I made it work using CAT control via the com ports. Would be nice to get the interface working through Flex API of course.
Thanks,
jack wz1y 


N3FJP Country Files - 21 July 2021

Jim Reisert AD1C
 

There are new country files for ACLog and related software by N3FJP.

To update the country files from the logging program menu, select:

Files -> Download Country Files From AD1C

You should download all three files. When done, you can re-start your
logging program.

Manual installation instructions are here:

https://www.country-files.com/n3fjp-info/

Here are the release notes:

https://www.country-files.com/n3fjp-21-july-2021/

N3FJP - 21 July 2021
Version entity is Vanuatu, YJ

Added/changed Entities/Prefixes/Callsigns:

* EA1RCI/YC is Spain, EA
* EA6LU/P is Balearic Islands, EA6
* I2DMK/MI is Italy, I
* JQ1CJK/P is Ogasawara, JD/o
* KH6JRL is United States, K in CQ zone 3, ITU zone 6
* KH6DLK/0 is United States, K in CQ zone 4, ITU zone 7
* NH7QH, NH7XJ and WP4KBX are all United States, K in CQ zone 5, ITU zone 8
* KH6HQ is Guam, KH2
* KE8CCS is Alaska, KL
* KO4KSF is Puerto Rico, KP4
* OH0SCA/8 and OH6UW/S are both Finland, OH
* RN9N/1 is in ITU zone 19, not ITU zone 29
* RV1CC/P is in ITU zone 29, not ITU zone 19
* R9GM/M, RA9USU/4, RV9WB/M and UB8S/P are all European Russia, UA
* R3OG/2 is Kaliningrad, UA2
* UA9UAX/M is in ITU zone 20, not ITU zone 30
* R5QA/M is in ITU zone 32, not ITU zone 31
* R8MZ/9 is in ITU zone 32, not ITU zone 30
* R8MZ/9 is in CQ zone 23, not CQ zone 18
* RN9N/M, UA9APA/P and UA9CDC/M are all Asiatic Russia, UA9
* R7AB/M and R7AB/P are both Asiatic Russia, UA9 in CQ zone 16
* RA4FRH/9/M is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31
* R800SAN is Asiatic Russia, UA9 in CQ zone 18, ITU zone 32
* UB8JDH/0 is Asiatic Russia, UA9 in CQ zone 19
* R0HQ, R0MR/P, R3BY/P and RU5D/P are all Asiatic Russia, UA9 in CQ zone 19, ITU zone 34
* R0FK/POLE is Asiatic Russia, UA9 in CQ zone 40
* VK4FDJL/8 is Australia, VK in CQ zone 29, ITU zone 55

Removed Entities/Prefixes/Callsigns:

* KK6KO/KC4 in Antarctica, CE9
* EA6LU/P in Spain, EA
* EA5EZ in Balearic Islands, EA6
* R7AB/M, R7AB/P, RN9N/M and UA9APA/P in European Russia, UA
* RV9WB/M and UB8S/P in Asiatic Russia, UA9

If you have any questions, send E-mail to Jim Reisert AD1C (at the
address below) or make a post to the N3FJP software users reflector.

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us


Re: ACLOG not showing PSK #aclog

 

Thanks for the info Scott . 73's Dave

On 7/20/2021 5:38 AM, Scott Davis via groups.io wrote:
Hi Dave,

Thanks for your e-mail.  Yes, on AC Log's rig interface form, after you verify that your rig is being polled properly, choose the options to return mode by frequency and check the check box to return all mapped digital modes.

Enjoy!

73, Scott
N3FJP


Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave Tucker Nu4N <dwtucker19@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jul 19, 2021 4:49 pm
Subject: [N3FJPSoftwareUsers] ACLOG not showing PSK #aclog

I use ACLOG with FLDIGI. I have to change the mode to PSK manually otherwise it shows CW.
Is there a fix for this Scott??

--
NU4N Dave 73's

--
NU4N Dave 73's


Re: ACLOG not showing PSK #aclog

Scott Davis
 

Hi Dave,

Thanks for your e-mail.  Yes, on AC Log's rig interface form, after you verify that your rig is being polled properly, choose the options to return mode by frequency and check the check box to return all mapped digital modes.

Enjoy!

73, Scott
N3FJP


Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave Tucker Nu4N <dwtucker19@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jul 19, 2021 4:49 pm
Subject: [N3FJPSoftwareUsers] ACLOG not showing PSK #aclog

I use ACLOG with FLDIGI. I have to change the mode to PSK manually otherwise it shows CW.
Is there a fix for this Scott??

--
NU4N Dave 73's


Re: Flex 6600 API Interface #setup

Dave wo2x
 

If you are trying to make the API connection work remote, it won’t. The Flex UDP broadcast traffic on port 4992 will not be forwarded to your remote site where N3FJP is running.

It only works for logging program local to the radio (same subnet).

 

Dave wo2x

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Jack Di Palo
Sent: Monday, July 19, 2021 10:18 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Flex 6600 API Interface #setup

 

Thank you all for the suggestions. I’ll try them when I’m back on-site, but for today I made it work using CAT control via the com ports. Would be nice to get the interface working through Flex API of course.
Thanks,
jack wz1y 


Re: Flex 6600 API Interface #setup

Jack Di Palo
 

Thank you all for the suggestions. I’ll try them when I’m back on-site, but for today I made it work using CAT control via the com ports. Would be nice to get the interface working through Flex API of course.
Thanks,
jack wz1y 


ACLOG not showing PSK #aclog

 

I use ACLOG with FLDIGI. I have to change the mode to PSK manually otherwise it shows CW.
Is there a fix for this Scott??

--
NU4N Dave 73's

4841 - 4860 of 54637