Date   

Re: Edit Fields Displayed error, again

James Goff <goffmaine@...>
 

Kimberly and Rick:  Thanks. The ACLBETA.exe did the trick!
73, W1JHG
-Jim

James H. Goff
207-944-3297 (c)
 


On Tue, Feb 23, 2021 at 10:00 AM Rick Markey, KN3C <kn3c@...> wrote:
Jim,

I had the exact issue on two computers, and the Beta resolved it.  I did a complete uninstall and removed the user directories so everything was fresh.

Rick, KN3C

On 2/23/2021 09:57, James Goff wrote:
Thanks, Kimberly. You mention uninstalling the current version. Is that step necessary or can I install BETA right over the existing program?

-Jim

James H. Goff
207-944-3297 (c)
 


On Mon, Feb 22, 2021 at 7:29 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:



Be well and enjoy!

73, Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff
207-944-3297 (c)
 


Re: Edit Fields Displayed error, again

James Goff <goffmaine@...>
 

Rick:  That did it!  Many thanks!
73, W1JHG
-Jim

James H. Goff
207-944-3297 (c)
 


On Tue, Feb 23, 2021 at 10:00 AM Rick Markey, KN3C <kn3c@...> wrote:
Jim,

I had the exact issue on two computers, and the Beta resolved it.  I did a complete uninstall and removed the user directories so everything was fresh.

Rick, KN3C

On 2/23/2021 09:57, James Goff wrote:
Thanks, Kimberly. You mention uninstalling the current version. Is that step necessary or can I install BETA right over the existing program?

-Jim

James H. Goff
207-944-3297 (c)
 


On Mon, Feb 22, 2021 at 7:29 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:



Be well and enjoy!

73, Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff
207-944-3297 (c)
 


Re: Alert for Countries Needed

Bo W4GHV
 

Butch,  An interesting topic that begs fancy solutions.
I've tried customizing my profile on ve7cc cluster and using ve7cc as my dx spots. 
Using it along with clublog and Win4icom I've had decent results.
I haven't refined this and use JTALERT and ACL to help with audible alerts. 
I guess I need a consise summary of the best way to do this, for this old scrambled brain.
I'm 80 and need to wipe out the remaining 100 countries.
--
73, Bo W4GHV since '54
https://www.qrz.com/db/W4GHV


Re: If I Created a POTA Log?

Michael WA7SKG
 

Please keep in mind that World Wide Flora and Fauna (WWFF) and Parks On The Air (POTA) are two distinctly different programs with different requirements and park numbers.

Michael WA7SKG

Scott Davis via groups.io wrote on 2/23/21 8:01 AM:

Hi All,
While I've had lots of great reports from folks who have configured AC Log for POTA as detailed here:
How do I configure AC Log for proper ADIF output for WWFF Parks on the Air (POTA)? <http://www.n3fjp.com/faq.html#q107>
http://www.n3fjp.com/faq.html#q107
I continue to receive requests for a dedicated POTA logger.
When I create contest specific applications, I know exactly what I want them to do, but I've not operated POTA much, I don't know what you would like to see and what a stand alone application built on a contest software template would do, that would be superior to how AC Log supports POTA already.
If you all can collectively brainstorm a clear and specific vision of what that would look like, if time and tide allow, I will consider a POTA specific application.  The main caveat is that I must be able to adapt an existing contest template (at least in terms of states / sections worked and / or any lists, such as the ARRL DX software format).
In short, if you can nail down and agree on something clear and specific, that is obtainable from my existing templates and is superior to how AC Log supports POTA, while I can't promise, I will try.
I am looking forward to seeing what emerges from the consensus of your brainstorming!
73, Scott
N3FJP
_http://www.n3fjp.com_ <http://www.n3fjp.com/>


If I Created a POTA Log?

Scott Davis
 


Hi All,

While I've had lots of great reports from folks who have configured AC Log for POTA as detailed here:


http://www.n3fjp.com/faq.html#q107

I continue to receive requests for a dedicated POTA logger.

When I create contest specific applications, I know exactly what I want them to do, but I've not operated POTA much, I don't know what you would like to see and what a stand alone application built on a contest software template would do, that would be superior to how AC Log supports POTA already.

If you all can collectively brainstorm a clear and specific vision of what that would look like, if time and tide allow, I will consider a POTA specific application.  The main caveat is that I must be able to adapt an existing contest template (at least in terms of states / sections worked and / or any lists, such as the ARRL DX software format).  

In short, if you can nail down and agree on something clear and specific, that is obtainable from my existing templates and is superior to how AC Log supports POTA, while I can't promise, I will try.

I am looking forward to seeing what emerges from the consensus of your brainstorming!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


Re: Edit Fields Displayed error, again

Rick Markey, KN3C <kn3c@...>
 

Jim,

I had the exact issue on two computers, and the Beta resolved it.  I did a complete uninstall and removed the user directories so everything was fresh.

Rick, KN3C

On 2/23/2021 09:57, James Goff wrote:
Thanks, Kimberly. You mention uninstalling the current version. Is that step necessary or can I install BETA right over the existing program?

-Jim

James H. Goff
207-944-3297 (c)
 


On Mon, Feb 22, 2021 at 7:29 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:



Be well and enjoy!

73, Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff
207-944-3297 (c)
 


Re: Edit Fields Displayed error, again

James Goff <goffmaine@...>
 

Thanks, Kimberly. You mention uninstalling the current version. Is that step necessary or can I install BETA right over the existing program?

-Jim

James H. Goff
207-944-3297 (c)
 


On Mon, Feb 22, 2021 at 7:29 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:



Be well and enjoy!

73, Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff
207-944-3297 (c)
 


Re: Bearing, Distant and Cont.

Scott Davis
 

Hi Dennis,

Thanks for your e-mail. You will find more information here:

The AC Log bearing and distance doesn’t seem to work properly for stateside QSOs?

http://www.n3fjp.com/faq.html#q21

Be well and enjoy!

73, Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dennis Wage <dwage@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 7:39 pm
Subject: [N3FJPSoftwareUsers] Bearing, Distant and Cont.

Is there anyway to make these three values be calculated from the info received from QRZ?
So that they are more precise.

Dennis M. Wage (W9BOQ)

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net


Re: Editing my Log

Jim Hamlin
 

Thanx John, I didnt even realize there was a contest ID field, since its normally off my screen.  Guess I'll move to where the default "other" column is.  And another thanx for the tip on qso party log manipulation.

Sent from my Verizon, Samsung Galaxy smartphone


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of John Huber <n8fyl@...>
Sent: Monday, February 22, 2021 7:35:33 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Editing my Log
 
Jim / W8JRH

An ADIF import of the raw (that is not altered at all) ADIF file exported from N1MM+ populates the ACLog "Contest-ID" field.  Is that not sufficient for some reason?  I have thousands of ACLog entries from N1MM+ and they have always populated the Contest-ID field for me.

For state QSO parties where county is part of the exchange, I process the N1MM+ ADIF file through the AD1C "ADIF County Conversion" tool to transform the contest logged county format to a valid ADIF "CNTY" field.  Then I import that into ACLog.
--
73,  John / N8FYL


Bearing, Distant and Cont.

Dennis Wage
 

Is there anyway to make these three values be calculated from the info received from QRZ?
So that they are more precise.

Dennis M. Wage (W9BOQ)

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net


Re: Editing my Log

John Huber
 

Jim / W8JRH

An ADIF import of the raw (that is not altered at all) ADIF file exported from N1MM+ populates the ACLog "Contest-ID" field.  Is that not sufficient for some reason?  I have thousands of ACLog entries from N1MM+ and they have always populated the Contest-ID field for me.

For state QSO parties where county is part of the exchange, I process the N1MM+ ADIF file through the AD1C "ADIF County Conversion" tool to transform the contest logged county format to a valid ADIF "CNTY" field.  Then I import that into ACLog.
--
73,  John / N8FYL


Re: Edit Fields Displayed error, again

Scott Davis
 

Hi Jim,

Thanks for your e-mail. Sorry you have run into trouble. Please try uninstalling your current version and give this beta a try:



Be well and enjoy!

73, Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Goff <goffmaine@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Feb 22, 2021 3:09 pm
Subject: [N3FJPSoftwareUsers] Edit Fields Displayed error, again

After disabling DX Spotting and selecting "Edit Fields Displayed Position and Tab Order", the box "Please First Set Form size to 100%" opens. I choose "Yes" to having the system update the settings. The "Complete Reset" box opens and I select "OK". The program closes. When I re-open ACLog, the problem is not resolved and continues with a 'looping' of the same two boxes. This happened several weeks ago. Only a re-installation of the program solved the issue.  Comments and suggestions welcome!

73, W1JHG

-Jim

James H. Goff
207-944-3297 (c)
 


Re: Great contest, thanks to the N3FJP log used at N0GM

Scott Davis
 

Hi George,

Thanks so much for your kind words. Scott really appreciates your encouragement. It's great to hear about all the functions you find useful in the "heat of the contest"! Our thoughts and prayers for a speedy recovery from your fall.

Be well and enjoy!

73, Scott, N3FJP & Kimberly, KA3SEQ

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: George Merkle N0GM <grmjunior@...>
To: AC Log Group <n3fjpsoftwareusers@groups.io>
Sent: Mon, Feb 22, 2021 12:28 pm
Subject: [N3FJPSoftwareUsers] Great contest, thanks to the N3FJP log used at N0GM

Scott & Kimberly,
Thank you for making such a great log!  Operating this contest was such a delight, especially since I slipped on ice last week and broke my hand and knee cap, so was pretty much confined to the ham shack (no, I didn't plan this!).

CTRL-H function to store calls and frequencies enabled me to bag Cuba, Venezuela, and Curacao in the last 12 minutes of the contest, as I toggled between them.  (So much easier than stacked VFOs on my Yaseu FTDX3000, which require keeping a paper track of which VFO is where.)  Dupe function and Super Check again made it so much easier, especially for those 40 wpm computer generated CQ's barely audible, and this time, the DX spotting feature actually enabled me to log some contacts I otherwise would have missed.

I started out the contest with a stack of blank paper on my desk to keep notes, but only used 2 or 3 sheets for 242 QSO's, a tribute to the efficacy of your program.  Have already successfully uploaded the log to the ARRL and imported it into ACL for LOTW.

Bravo Zulu (Well Done) from this one time Navy radioman.
George N0GM
San Antonio TX


Re: Editing my Log

Michael WA7SKG
 

Hi Jim,

Since you are importing an ADIF file, that is the easiest place to edit it. Open your adi file in Notepad. If the Comment field is there, it will be something like <COMMENT:0>. However, if it is blank, it likely will not be there at all. Here are the steps to add your requested field:

-Open the file in Notepad
-At the end of the first contact, highlight <EOR>
-Hit ctrl-H, <EOR> should show up in the Find what box
-In the Replace with box, enter <COMMENT:7>WWCW DX <EOR>
-Click the Replace All button
-Click Cancel to close the Replace box
-Save the file and close Notepad
-Import the corrected file into ACLog

All the imported contacts should now show WWCW DX in the Comments section.

HTH,
73,
Michael WA7SKG



Jim Hamlin wrote on 2/22/21 2:09 PM:

Thanx Larry.  I imported my N1mm+ adif log file from the wwcw dx contest, and need to fill the comment field which is blank.
73.   Jim / W8JRH
Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android <https://aka.ms/ghei36>
------------------------------------------------------------------------
*From:* N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Larry Banks via groups.io <larryb.w1dyj=verizon.net@groups.io>
*Sent:* Monday, February 22, 2021 4:42:55 PM
*To:* N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
*Subject:* Re: [N3FJPSoftwareUsers] Editing my Log
Hi Jim (call?),
If you are using the contest logger it is part of writing the ADIF file, which when pulled into ACLog will be in the comments field.
73 -- Larry -- W1DYJ
*From:* Jim Hamlin <mailto:Jhamlin2015@outlook.com>
*Sent:* Monday, February 22, 2021 15:04
*To:* n3fjpsoftwareusers@groups.io <mailto:n3fjpsoftwareusers@groups.io>
*Subject:* [N3FJPSoftwareUsers] Editing my Log
What's the easiest way to populate multiple log entries, in the "comments" area, with a constant like "WW CW"?


Re: Editing my Log

Larry Banks
 

Hi Jim,
 
I’m actually surprised that N1MM+ doesn’t have the ability to add a comment, however the ADIF fields for the two loggers could be different.  In the past when I have used N1MM (due to a lack of a certain contest in Scott’s suite) I have edited the N1MM ADIF with Notepad before importing it.  ADIF Master will also allow you to do this.  You could edit the N1MM+ ADIF for the ARRLDXCW and re-import it, or export the ADIF from ACLog, edit it, and re-import it.  Be sure to delete the Qs from ACLog before re-importing then so you don’t have dupes.
 
I also edit the ADIF from one of Scott’s contest logs when I am at my Maine QTH to add the location before importing it into my ACLog using Notepad.

73 -- Larry -- W1DYJ

 

From: Jim Hamlin
Sent: Monday, February 22, 2021 17:09
Subject: Re: [N3FJPSoftwareUsers] Editing my Log
 
Thanx Larry.  I imported my N1mm+ adif log file from the wwcw dx contest, and need to fill the comment field which is blank.
73.   Jim / W8JRH
 
Sent from my Verizon, Samsung Galaxy smartphone


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Larry Banks via groups.io <larryb.w1dyj@...>
Sent: Monday, February 22, 2021 4:42:55 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Editing my Log
 
Hi Jim (call?),
 
If you are using the contest logger it is part of writing the ADIF file, which when pulled into ACLog will be in the comments field.

73 -- Larry -- W1DYJ

 
From: Jim Hamlin
Sent: Monday, February 22, 2021 15:04
Subject: [N3FJPSoftwareUsers] Editing my Log
 
What's the easiest way to populate multiple log entries, in the "comments" area, with a constant like "WW CW"?

Virus-free. www.avg.com


Re: Editing my Log

Jim Hamlin
 

Thanx Larry.  I imported my N1mm+ adif log file from the wwcw dx contest, and need to fill the comment field which is blank.
73.   Jim / W8JRH

Sent from my Verizon, Samsung Galaxy smartphone


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Larry Banks via groups.io <larryb.w1dyj@...>
Sent: Monday, February 22, 2021 4:42:55 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Editing my Log
 
Hi Jim (call?),
 
If you are using the contest logger it is part of writing the ADIF file, which when pulled into ACLog will be in the comments field.

73 -- Larry -- W1DYJ

 
Sent: Monday, February 22, 2021 15:04
Subject: [N3FJPSoftwareUsers] Editing my Log
 
What's the easiest way to populate multiple log entries, in the "comments" area, with a constant like "WW CW"?

Virus-free. www.avg.com


Re: Editing my Log

Larry Banks
 

Hi Jim (call?),
 
If you are using the contest logger it is part of writing the ADIF file, which when pulled into ACLog will be in the comments field.

73 -- Larry -- W1DYJ

 

From: Jim Hamlin
Sent: Monday, February 22, 2021 15:04
Subject: [N3FJPSoftwareUsers] Editing my Log
 
What's the easiest way to populate multiple log entries, in the "comments" area, with a constant like "WW CW"?

Virus-free. www.avg.com


Re: Alert for Countries Needed

Butch McCollough
 

ok.....perhaps I just haven't had any 'New' countries come up yet on the Cluster.  I'll keep an eye on it.  Thanks for your input.

73,

Butch...K3AFR



On 2/22/2021 15:23, Pat Whelton wrote:

It’s kind of a passive thing (I guess that’s a good word).  In-other-words I’ll be sitting at the desk trading stocks or something and I’ll hear Kimberly say “Needed Spot” or something like that and if I’m not interested I keep on making another million dollars but if I am interested I say “to hell with money I’d rather work DX”.  I then fire up the rig, click on the spot and work a new country on a new band.

 

It doesn’t have anything to do with entering the call in your log.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Butch McCollough
Sent: Monday, February 22, 2021 2:16 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Alert for Countries Needed

 

Pat does it alert you automatically when it appears on the DX Cluster or when you enter the call sign into the log?

Butch...K3AFR

 

On 2/22/2021 15:03, Pat Whelton wrote:

Hmmm!!!  Seems to alert me all the time.  My alerts went way down because I have over 300 confirmed but then I made a change in the alerting system to alert me if the country was new to the band and now every now and then I get an alert.

 

Sorry it doesn’t work for you.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Butch McCollough
Sent: Monday, February 22, 2021 1:47 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Alert for Countries Needed

 

Oh....and also.....it doesn't alert when it appears on the DX Cluster.

Butch...K3AFR


Re: Alert for Countries Needed

Pat Whelton
 

It’s kind of a passive thing (I guess that’s a good word).  In-other-words I’ll be sitting at the desk trading stocks or something and I’ll hear Kimberly say “Needed Spot” or something like that and if I’m not interested I keep on making another million dollars but if I am interested I say “to hell with money I’d rather work DX”.  I then fire up the rig, click on the spot and work a new country on a new band.

 

It doesn’t have anything to do with entering the call in your log.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Butch McCollough
Sent: Monday, February 22, 2021 2:16 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Alert for Countries Needed

 

Pat does it alert you automatically when it appears on the DX Cluster or when you enter the call sign into the log?

Butch...K3AFR

 

On 2/22/2021 15:03, Pat Whelton wrote:

Hmmm!!!  Seems to alert me all the time.  My alerts went way down because I have over 300 confirmed but then I made a change in the alerting system to alert me if the country was new to the band and now every now and then I get an alert.

 

Sorry it doesn’t work for you.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Butch McCollough
Sent: Monday, February 22, 2021 1:47 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Alert for Countries Needed

 

Oh....and also.....it doesn't alert when it appears on the DX Cluster.

Butch...K3AFR


Re: Alert for Countries Needed

Butch McCollough
 

Pat does it alert you automatically when it appears on the DX Cluster or when you enter the call sign into the log?

Butch...K3AFR


On 2/22/2021 15:03, Pat Whelton wrote:

Hmmm!!!  Seems to alert me all the time.  My alerts went way down because I have over 300 confirmed but then I made a change in the alerting system to alert me if the country was new to the band and now every now and then I get an alert.

 

Sorry it doesn’t work for you.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Butch McCollough
Sent: Monday, February 22, 2021 1:47 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Alert for Countries Needed

 

Oh....and also.....it doesn't alert when it appears on the DX Cluster.

Butch...K3AFR

5521 - 5540 of 52338