Date   

Problem with ACL and SatPC32 interface with Kenwood TS2000

Stephen Malyszka
 

Hi Scott or anyone,

The TS2000 has only one RS232 port. I'm using a virtual port splitter to connect Satpc32 and N3FJP to that port. The TS2000 has 2 receivers. When operating on different uplink and downlink bands (Receiver A set to downlink and Receiver B set to uplink), N3FJP records the received frequency/band (Receiver A) in the log. I wish to have the transmitted uplink frequency/band (Receiver B) recorded in my log. I have configured ACL in the radio settings menu to read Receiver B (FB;) but ACL still reports Receiver A. Any help in fixing this would be appreciated.

Steve
AG2J


Probably my dumb

John AJ1R
 

I enjoy working contests  very informally, just like giving people a few points.
I just use N3FJP standard logger.
I setup the 1st "other" field and  named it "contest,etc".
Recently worked a contest and put the same value in "Other1" for each contact I made.
Now I would like to change the content of "Other1" to a different value for those entries.
How do I do a "search and replace" on the records in my log file.
This probably is simple, but I could  not find a way.

Thanks in advance for any help


Re: Club affiliation when submitting to online score sites

David Hornbaker - N1DCH
 

Thanks figured it out


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via groups.io <SNKDavis@...>
Sent: Monday, January 18, 2021 10:54:55 AM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Club affiliation when submitting to online score sites
 
Hi Dave,

Thanks for your follow up.  Please only respond once to each thread.  Sending similar messages multiple times only creates confusion.

The club data you enter is included with every upload.  You will need to sort that with the COS folks.

Good luck!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Hornbaker - N1DCH <daveho@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jan 18, 2021 10:48 am
Subject: [N3FJPSoftwareUsers] Club affiliation when submitting to online score sites

In the VHF contest scores on https://contestonlinescore.com/scoreboard/?contest_id=135 the club is wrong for my entry.
This is from field day.  In the VHF contest log I had NEWSVHF listed.  Why is the old data showing up and how can i fix it?

thanks
Dave
73


Re: Club affiliation when submitting to online score sites

Scott Davis
 

Hi Dave,

Thanks for your follow up.  Please only respond once to each thread.  Sending similar messages multiple times only creates confusion.

The club data you enter is included with every upload.  You will need to sort that with the COS folks.

Good luck!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Hornbaker - N1DCH <daveho@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jan 18, 2021 10:48 am
Subject: [N3FJPSoftwareUsers] Club affiliation when submitting to online score sites

In the VHF contest scores on https://contestonlinescore.com/scoreboard/?contest_id=135 the club is wrong for my entry.
This is from field day.  In the VHF contest log I had NEWSVHF listed.  Why is the old data showing up and how can i fix it?

thanks
Dave
73


Re: Contest online score club information

Scott Davis
 

Hi Dave,

The club data you enter is included with every upload.  You will need to sort that with the COS folks.

Good luck!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Hornbaker - N1DCH <daveho@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Jan 18, 2021 10:43 am
Subject: [N3FJPSoftwareUsers] Contest online score club information

The club that showed up with my score was old data.
 
This is what I configured:
 
I did change it after I started, but the original value was blank.  How do I change this for future contests?
 
Thanks
73
Dave
 
 
David Hornbaker
N1DCH / WQPQ580
President Minuteman Repeater Association
 


Club affiliation when submitting to online score sites

David Hornbaker - N1DCH
 

In the VHF contest scores on https://contestonlinescore.com/scoreboard/?contest_id=135 the club is wrong for my entry.
This is from field day.  In the VHF contest log I had NEWSVHF listed.  Why is the old data showing up and how can i fix it?

thanks
Dave
73


Contest online score club information

David Hornbaker - N1DCH
 

The club that showed up with my score was old data.

 

This is what I configured:

 

I did change it after I started, but the original value was blank.  How do I change this for future contests?

 

Thanks

73

Dave

 

 

David Hornbaker

N1DCH / WQPQ580

President Minuteman Repeater Association

 


Re: contest online score upload

Scott Davis
 

Hi David,

Thanks for your follow up.  I just took a look on Contest Online Score and it appears everything is fine with your score appearing.  You placed 47th!  Well done!

Capture.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Latour <ve4dla@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jan 18, 2021 10:09 am
Subject: Re: [N3FJPSoftwareUsers] contest online score upload

Thanks Scott, that’s exactly what I did, and got the results described above. 
--
David VE4DL


Re: contest online score upload

David Latour
 

Thanks Scott, that’s exactly what I did, and got the results described above. 
--
David VE4DL


locked Off Topic: Protecting our Frequencies & Our Country

Scott Davis
 

Hi All,

Below is an e-mail I sent to our local club yesterday afternoon.  We are in a unique position to do so something very helpful for our country, by monitoring for illegal activity.  Collectively, I suspect we can provide this service better than anyone else on the planet.

The text is specific to our club, so you will likely want to reword some of this, to make it applicable to your area, before you share it with your local group, but please feel free to use any sections that are pertinent....

-----Original Message-----
From: Scott & Kimberly Davis <snkdavis@...>
Sent: Sun, Jan 17, 2021 4:48 pm
Subject: Everyone, Please Read: Protecting our NEMARC Frequencies & Our Country

Hi All,

I think most of us are still somewhat reeling, sickened and incredulous as to what happened last week in Washington.  Whatever our political beliefs, that behavior is completely and totally unacceptable.

As you probably know, the riot organizers have lost the use of most of the on line forums that they previously relied on for planning and coordination.  What you may not know is that these individuals are now turning to two way radio to further their agenda.  According to a CNN article dated today, the FCC just made the following statement:

https://www.cnn.com/2021/01/17/tech/fcc-radio-extremist-social-media-attack/index.html

"The Bureau has become aware of discussions on social media platforms suggesting that certain radio services regulated by the Commission may be an alternative to social media platforms for groups to communicate and coordinate future activities," the FCC said in its warning Sunday. "Individuals using radios in the Amateur or Personal Radio Services in this manner may be subject to severe penalties, including significant fines, seizure of the offending equipment, and, in some cases, criminal prosecution."

I believe that is occurring in our area.  Earlier this afternoon, I heard a new guy "testing" on 146.595.  I gave him a call and asked the normal, welcoming questions.  It didn't take long for the individual, alluding to the riots, to explain that he and several of his friends were newly licensed in the last few months, so that they could communicate and make plans for certain emergencies / contingencies / meetups, etc.  He went on to explain that they had their own Discord channel, but it that their Discord channel got shut down after the riots.  It is easy to infer the content of their channel if it gave Discord cause to block it.

In addition, episodes of intentional, harmful interference in Harford County are increasing.  It's not limited to the ham bands.  Public service frequencies, such as Harford Fire are also being intentionally interfered with.

So, we have two specific goals:

1.  We do not want these guys on our NEMARC frequencies.

2.  We do not want these guys in our area.


To keep these guys off our frequencies....

We've not been as active on 146.595 lately, so perhaps others have found it easy to slide in.  For us to accomplish goal number 1, we need to make 146.595 less attractive for their purposes.  These guys are looking for frequencies where they can communicate without lots of ears.  If you hear someone new on the frequency, call them.  Be nice and engaging.  First, they might truly be good, new folks (and we sure want them to stay), but if they are guys with nefarious intent, they are not going to want to continually have to go "around" us to plan their stuff.  So, everyone, please monitor 146.595.  If you hear someone new, chat them up every time they are on (but don't invite them to join NEMARC until you are sure they are ok).  They will get tired of us and move to another frequency.

If you start a conversation, ping the rest of us on Discord, so that we can all join in.


To get these guys out of here.....

Guys, you and I are in a unique position to be especially useful in ferreting out these guys and helping to protect our country.  

If we can prove illegal communications are occurring, we can relay that proof to the authorities.  The beauty is, we already have most of the equipment we need to listen for that proof.  My guess is these guys are going to be using unmodified radios, so think Amateur Radio, FRS, GMRS and CB frequencies.  Most of us already have good antennas covering those bands.  All we need are inexpensive analog scanners with those frequencies programmed in.  

If you pick up illegal communication, record it.  Should we obtain solid evidence of planning for illegal activity, I have contacts with ARRL that I know will advise us on how to proceed.

If you don't already have a scanner, I purchased this 500 channel, analog scanner about a year ago.  It is only $99 and is perfect for the application we are describing, covering all the frequencies they would likely use:

https://www.amazon.com/gp/product/B01C73X4FK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

After this is over, you can always use it to monitor local repeaters, simplex, 10 meter repeaters, Harford Fire, etc.

You will want to hook the scanner to a good antenna.  The telescoping whip won't cut it.  I will be using either my 2M / 440 antenna, or a scanner antenna.  There are adapters available to easily hook your existing coax run to your scanner.  It will hear like a champ!

Finally, keep communicating with the group.  If you hear something locally, let others know what frequency(s) to monitor on Discord and e-mail.  Above all, if illegal activity is being discussed, DO NOT ENGAGE or tip your hand.  Just press record.


Let's do our part in this guys.  We can make a difference and help protect our country and uphold the basis and purpose of Amateur Radio.

73, Scott
N3FJP

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


Downloading New Versions

Greg Foster
 

 

 

 

 

 

Greg Foster

Jan 17   

Scott

 

Thanks for the reply. I was able to download with Microsoft Edge and with IE. I also tried the trick from the link using a right click>Save Link in Chrome and it worked. I am using Chrome 87.

 

Anyway, we got the file and we are good to go for Winter Field Day (using Web Upload Contest)!

Greg Foster

VE3PJ

Cell   613-328-6538

 

 

 

 

Has anyone else had problems downloading new versions, in particular winter field Day?

 

I tried some others and got nothing. When I hoover over the download link all I get is a link to the .exe field showing in the lower left of the window and when I click on the link nothing happens. I get the same things on both my Windows 7 and Windows 10 machines

 

Greg Foster

VE3PJ

Cell   613-328-6538

 

 More


 Scott Davis

Jan 17   

 

Hi Greg,

 

Thanks for your e-mail.  If you are using Chrome, depending on your security settings, the browser may not download files from the web.  Check your settings, or Give another browser such as Edge a try.

 

There is more detail in this page here:

 

https://www.ghacks.net/2020/10/08/chrome-is-blocking-downloads-here-is-why/

 

That said, I have not had any trouble with Chrome version 87 here.

 

I hope that this helps!

 

Enjoy!

73, Scott

N3FJP

http://www.n3fjp.com

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

 

Greg Foster

VE3PJ

613-328-6538

 


Re: Resolved - Club Score Processor 1.1 "Could Not Create SSL/TLS Secure Channel"

K5MSK (Michael)
 

Thank you very much for this write-up!  I was having issues as well and this fixed it.
Who knew .NET wasn't configured "out of the box" for secure communications? Not me. I'm a long-time Linux nerd.  :)
Thanks, Charles!
73
Michael


Re: Map display

K8TS
 

Bo,

Was thinking the same thing Saturday.  Would be neat to toggle from all bands to working band.

I find the working band helpful is seeing what my antennas are doing.

However, I am happy with whatever Scott puts out. It’s better than I could do, and looking at some of the others, setting up and understanding them is above my pay grade.

Dale K8TS

 

Sent from Mail for Windows 10

 

From: Bo W4GHV
Sent: Sunday, January 17, 2021 1:05 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Map display

 

No biggie, but is there a way to get the USA worked map to merge all the band's into one map?.
It only shows the active one for the operating band.

But Nice to watch as is.  

I noted it didn't highlight PR on the map when worked. 

Humor only: Also noted the Canadian regions go under the states total. 🤔😂  They are provinces I believe. 

Nice time in the NAQP SSB!  I got 30 states including those in Canada. 😂
--
73, Bo W4GHV since '54
https://www.qrz.com/db/W4GHV

 


Re: contest online score upload

Scott Davis
 

Hi David,

Thanks for your e-mail.  For the online scoreboards, the easiest approach is just using the Score Distributor option.  Here are my settings:

Capture.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Latour <ve4dla@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jan 17, 2021 4:10 pm
Subject: [N3FJPSoftwareUsers] contest online score upload

Hi Scott,
I was in NAQP with your logger yesterday (works a treat) and for the first time I was in a team for the contest. I was asked partway into the day to set up contestonlinescore with the Club info, which I did, and enabled the web upload in the logger. It uploaded my score as it was at that moment, but never updated the score for the rest of the day. What did I do wrong?
I've sent a similar message to the admin of COS, in case it's at their end.
--
David VE4DL


Re: Contest Club Logging

Scott Davis
 

Hi David,

Thanks for your e-mail.  Make sure that you check the Enable check box for your uploads to continue after clicking Settings > Web Upload > N3FJP Formatted.

Complete details are here:

http://www.n3fjp.com/clubscore.html

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Latour <ve4dla@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jan 17, 2021 4:06 pm
Subject: Re: [N3FJPSoftwareUsers] Contest Club Logging

I used it in NAQP yesterday, and had trouble. It uploaded my results as they were when I first logged onto the scoreboard, but never updated it to the end of the contest. I've written the admin there.
--
David VE4DL


contest online score upload

David Latour
 

Hi Scott,
I was in NAQP with your logger yesterday (works a treat) and for the first time I was in a team for the contest. I was asked partway into the day to set up contestonlinescore with the Club info, which I did, and enabled the web upload in the logger. It uploaded my score as it was at that moment, but never updated the score for the rest of the day. What did I do wrong?
I've sent a similar message to the admin of COS, in case it's at their end.
--
David VE4DL


Re: Contest Club Logging

David Latour
 

I used it in NAQP yesterday, and had trouble. It uploaded my results as they were when I first logged onto the scoreboard, but never updated it to the end of the contest. I've written the admin there.
--
David VE4DL


Problem setting up N3FJP and SatPC32 with Kenwood TS2000

Stephen Malyszka
 

The TS2000 has only one RS232 port. I'm using a port splitter to connect Satpc32 and N3FJP to that port. The TS2000 has 2 receivers. When operating on different uplink and downlink bands (receiver A set to downlink and Receiver B set to uplink), N3FJP records the received frequency/band (Receiver A) in the log. I wish to have the transmitted uplink frequency/band (Receiver B) recorded in my log. I have configured N3FJP in the radio settings menu to read receiver B (FB;) but the software ignores it. Any help in fixing this would be appreciated.

Steve
AG2J


Map display

Bo W4GHV
 

No biggie, but is there a way to get the USA worked map to merge all the band's into one map?.
It only shows the active one for the operating band.

But Nice to watch as is.  

I noted it didn't highlight PR on the map when worked. 

Humor only: Also noted the Canadian regions go under the states total. 🤔😂  They are provinces I believe. 

Nice time in the NAQP SSB!  I got 30 states including those in Canada. 😂
--
73, Bo W4GHV since '54
https://www.qrz.com/db/W4GHV


Re: JTAlert & upload API 1100

Patrick Moonen
 

Hi Jim,

Have been testing on 2nd pc and the problem is Onedrive and JTAlert and path to logbook.
If the log is saved in OneDrive, the operation with JTAlert and AClog cannot work.
I have found the solution, you have to enter the path manually and do not save your logbook in OneDrive pad.

First delete the path where AClog stores the log.
Then you create a new log and enter the path yourself, as shown in the photo.
I tdid a clean install of JTAlert and then entered the path.
After that everything works as before with JTDX or WSJT-X upload to AClog via JTAlert.





73 Pat - ON3CQ



3061 - 3080 of 49124