Date   

ACLog Field Fill for Names

WA7WS
 

New to ACL.  I am currently in the process of adding my old .adi files to ACLog.
One of the nice features of ACL is auto lookup of names and filling that into the Name field.
Is there a way to get these old non-ACL contacts to include the names?  All are .adi's and are in the log.  All other information was populated properly.
I'm sure if I get into other areas like specific contesting I might like to see other areas populated as well for areas like WAS, WAC, Grid Squares, etc.

Thanks for any help.
Bill


Re: Mass Field Fill

Scott Davis
 

Hi Bill,

Thanks for your e-mail.  I think ADIF Master is probably the best solution.  More details are here:


http://www.n3fjp.com/faq.html#q63

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: N7GHG <chipz40@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Dec 1, 2020 8:45 am
Subject: [N3FJPSoftwareUsers] Mass Field Fill

Not sure how to title it.. But, I have just imported a lot of contacts into ACL from a different computer.  All are in .adi format.  They have populated ACL correctly.
However, I have added a field in ACL that I would like to be in all of my new files.  Is there a way to mass populate a range of fields as you would in something like a text edit format without using text edit?  In other words.. something like typing the information on one line and doing whatever magic to fill the rest of the column from a specific record to another record.. let's say 100 records.

Hoping so... or it would take a couple of days of nonstop copy and paste.

Thanks, Bill


Re: Can't connect to LOTW for downloads

Larry Banks
 

It’s now up to a 13 hour delay.  The CQ WW DX contest is one of the largest.  If you uploaded your Qs before last night at about 7PM, your confirmations ought to be there.  I always check the queue before I log into LoTW: http://www.arrl.org/logbook-queue-status

73 -- Larry -- W1DYJ

 

From: Paul AC9O
Sent: Monday, November 30, 2020 23:41
Subject: Re: [N3FJPSoftwareUsers] Can't connect to LOTW for downloads
 
The LoTW web site is severely overwhelmed at this time. Big contest uploads being processed.  Wait a couple days. It was over 10 hours behind  today. 


Mass Field Fill

WA7WS
 

Not sure how to title it.. But, I have just imported a lot of contacts into ACL from a different computer.  All are in .adi format.  They have populated ACL correctly.
However, I have added a field in ACL that I would like to be in all of my new files.  Is there a way to mass populate a range of fields as you would in something like a text edit format without using text edit?  In other words.. something like typing the information on one line and doing whatever magic to fill the rest of the column from a specific record to another record.. let's say 100 records.

Hoping so... or it would take a couple of days of nonstop copy and paste.

Thanks, Bill


Re: Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

Scott Davis
 

Thanks for the good report George!  Lord willing, Chis and I will likely do a global release of all our software, with the latest features, in January.

Thanks again!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Nov 30, 2020 11:33 pm
Subject: Re: [N3FJPSoftwareUsers] Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

Hi Scott,

As expected my favorite cluster did crash several times over the weekend.  Each time I received the anticipated audio alert and the software changed to the secondary cluster.   I'm sold!  This update is ready.

73, George K4GM

On 11/25/2020 5:45 AM, Scott Davis via groups.io wrote:
Awesome George, thanks loads for the great report!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Nov 24, 2020 11:09 pm
Subject: Re: [N3FJPSoftwareUsers] Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

Hi Scott,

As a follow up to my previous email I did more testing.   Because of my business I have access to numerous wireless WIFI routers which connect wirelessly to cell towers.   I set up two other WIFI routers in addition to the one I normally use and switched from one to the other and so on  seriatim several times.  Each time I switched networks I heard the audio notification that ACLog was trying to reconnect to the cluster and each time it did successfully!!   Just thought I would confirm that the beta was working A-OK.   My cluster has not gone down yet but it may be overloaded and grind to a halt this weekend.   If I ever notice a re-connect to a second cluster I will advise.    I really appreciate this improvement.... in fact, one of my most appreciated.  

73, George K4GM


On 11/24/2020 7:22 AM, Scott Davis via groups.io wrote:
Thanks so much for the good report George!

It has been difficult to test here as I rarely lose connection, so I really appreciate the reports from you all.

Thanks again!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Nov 23, 2020 8:13 pm
Subject: Re: [N3FJPSoftwareUsers] Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

Scott,

You have done an excellent job on the auto reconnect feature.   Today I installed the beta and left the PC all afternoon until a few minutes ago (7 hrs).   When I returned my preferred cluster was still there and ACLog was still downloading spots.   For the last month or so I have been plagued by quick disconnect of the cluster, usually after only a couple of hours.   Thanks!    I have not had a disconnect yet so can't speak to that, but I will do so if and when one occurs.

73, George K4GM


On 11/19/2020 5:07 PM, Scott Davis via groups.io wrote:
Hi Gang,

I've been working on enhancing the DX Spotting reconnect functionality in my software.  In addition to automatically attempting a reconnect with your currently selected DX Spotting Telnet host, if the reconnect attempt fails, it will then try the next host in your list.

This is a difficult function to test, as aside from unplugging and replugging the LAN cable to simulate a disconnect, it is tough to simulate all the scenarios causing a disconnection.  I think the best way to test this is for as many of us to run AC Log, as much as possible and see what occurs if / when the Telnet site you happen to be connected to goes down.

If you would like to help test this feature, would you please uninstall your current version of AC Log from Windows Control Panel and then install this version:


It will say Beta 6.7.1 in the title bar.

Then click Settings > DX Spotting > Configure and check the Auto Reconnect option here:

Capture.JPG


If you have the ability to simulate a connection loss, awesome.  Otherwise, just let AC Log roll and see what happens.  There will be a text to speech voice letting you know if there is a reconnect attempt or a new site is tried.  You will also see text on the DX Spotting set up form of the attempts.

If you leave the PC, make a note of the host you are connected to and see if it is still the same site when you return.

Thanks in advance for your help with this!

Please let me know how you make out!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...




Re: ENIGMA WRAPPED IN...

Scott Davis
 

Hi Phil,

Thanks for your e-mail.  Responses inserted:

-----Original Message-----
From: Phil, WF3W <WF3W@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Nov 30, 2020 6:08 pm
Subject: [N3FJPSoftwareUsers] ENIGMA WRAPPED IN...

Good day group,
 
I am rabidly ashamed of my lack of intuition BUT, as of 11 30 this instant, I am cognizant of more than ONE confirmed QSO. Under that penumbra, I must pose the following queries, all on the DOWNLOAD side:
 
  1. what does CONFIRMED SINCE download?
**  QSOs confirmed by the other station since the date entered.
  1. what does ALL SINCE download?
**  All QSOs since the date entered.
  1. what does ALL CONFIRMED connote when I receive ONE confirmation, in 28 years of QSO?
**  The most like cause  is that you aren't running AC Log 6.7.

I ask these because they drive me nuts PLUS I am afraid of breaking LoTW's computer:
 
  • what does a REAL TIME upload do as opposed to UL which takes nanoseconds?
**  Real Time upload will upload the QSO as soon as you press enter from the main form.
  • WHY wud I want an EOF tag?
**  To ensure you received a complete download from LoTW.
  • what does RAW DATA contain, extra, that is of use?
**  Used for debugging.
  • precisely what does OVERWRITE EXISTING DATA write over?
**  Replaces existing data.  Not recommended.

I and my dearth of intuition thank-you.

**  Much of this is covered in far more detail on this page and in this video here:

http://www.n3fjp.com/lotwhelp.html

**  Enjoy

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
73
 
Phil



Re: Can't connect to LOTW for downloads

Paul AC9O
 

The LoTW web site is severely overwhelmed at this time. Big contest uploads being processed.  Wait a couple days. It was over 10 hours behind  today. 


Re: Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

K4GM-George
 

Hi Scott,

As expected my favorite cluster did crash several times over the weekend.  Each time I received the anticipated audio alert and the software changed to the secondary cluster.   I'm sold!  This update is ready.

73, George K4GM

On 11/25/2020 5:45 AM, Scott Davis via groups.io wrote:
Awesome George, thanks loads for the great report!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Nov 24, 2020 11:09 pm
Subject: Re: [N3FJPSoftwareUsers] Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

Hi Scott,

As a follow up to my previous email I did more testing.   Because of my business I have access to numerous wireless WIFI routers which connect wirelessly to cell towers.   I set up two other WIFI routers in addition to the one I normally use and switched from one to the other and so on  seriatim several times.  Each time I switched networks I heard the audio notification that ACLog was trying to reconnect to the cluster and each time it did successfully!!   Just thought I would confirm that the beta was working A-OK.   My cluster has not gone down yet but it may be overloaded and grind to a halt this weekend.   If I ever notice a re-connect to a second cluster I will advise.    I really appreciate this improvement.... in fact, one of my most appreciated.  

73, George K4GM


On 11/24/2020 7:22 AM, Scott Davis via groups.io wrote:
Thanks so much for the good report George!

It has been difficult to test here as I rarely lose connection, so I really appreciate the reports from you all.

Thanks again!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K4GM-George <k4gm@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Nov 23, 2020 8:13 pm
Subject: Re: [N3FJPSoftwareUsers] Please Test DX Spotting Reconnect in AC Log 6.7.1 Beta!

Scott,

You have done an excellent job on the auto reconnect feature.   Today I installed the beta and left the PC all afternoon until a few minutes ago (7 hrs).   When I returned my preferred cluster was still there and ACLog was still downloading spots.   For the last month or so I have been plagued by quick disconnect of the cluster, usually after only a couple of hours.   Thanks!    I have not had a disconnect yet so can't speak to that, but I will do so if and when one occurs.

73, George K4GM


On 11/19/2020 5:07 PM, Scott Davis via groups.io wrote:
Hi Gang,

I've been working on enhancing the DX Spotting reconnect functionality in my software.  In addition to automatically attempting a reconnect with your currently selected DX Spotting Telnet host, if the reconnect attempt fails, it will then try the next host in your list.

This is a difficult function to test, as aside from unplugging and replugging the LAN cable to simulate a disconnect, it is tough to simulate all the scenarios causing a disconnection.  I think the best way to test this is for as many of us to run AC Log, as much as possible and see what occurs if / when the Telnet site you happen to be connected to goes down.

If you would like to help test this feature, would you please uninstall your current version of AC Log from Windows Control Panel and then install this version:


It will say Beta 6.7.1 in the title bar.

Then click Settings > DX Spotting > Configure and check the Auto Reconnect option here:

Capture.JPG


If you have the ability to simulate a connection loss, awesome.  Otherwise, just let AC Log roll and see what happens.  There will be a text to speech voice letting you know if there is a reconnect attempt or a new site is tried.  You will also see text on the DX Spotting set up form of the attempts.

If you leave the PC, make a note of the host you are connected to and see if it is still the same site when you return.

Thanks in advance for your help with this!

Please let me know how you make out!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...




Can't connect to LOTW for downloads

Bill Seward
 

I've suddenly developed a problem downloading data from LOTW in ACL 6.7. I seem to be able to upload OK, but not download. I updated TQSL to version 2.5.7. I've double-checked my login info in ACL. I can log into the LOTW web site. LOTW shows as up on Down For Me. I'm attaching captures of the 2 error messages. The first message is a 503-Server Unavailable, the second indicates an incorrect response from the server or username/password. Suggestions?


Re: Error message "Error Scanning ADIF log Invalid ADIF Header

Kevin Gray
 

Look here and see if it is the same problem that was reported back in October.

 

WSJT is not exporting their ADIF header to ADIF spec, causing the first call sign to drop.  Please see this remedy here:

 

https://groups.io/g/N3FJPSoftwareUsers/message/44327

 

Kevin , N9VPV

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel - N7GCO - Cheney, WA
Sent: Monday, November 30, 2020 5:54 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Error message "Error Scanning ADIF log Invalid ADIF Header

 

When using AC Log with WSJT-X and JT ALert, I am now getting this error message:


ANy suggestions on how to fix it?


Error message "Error Scanning ADIF log Invalid ADIF Header

Mel - N7GCO - Cheney, WA
 

When using AC Log with WSJT-X and JT ALert, I am now getting this error message:


ANy suggestions on how to fix it?


ENIGMA WRAPPED IN...

Phil, WF3W <WF3W@...>
 

Good day group,
 
I am rabidly ashamed of my lack of intuition BUT, as of 11 30 this instant, I am cognizant of more than ONE confirmed QSO. Under that penumbra, I must pose the following queries, all on the DOWNLOAD side:
 
  1. what does CONFIRMED SINCE download?
  2. what does ALL SINCE download?
  3. what does ALL CONFIRMED connote when I receive ONE confirmation, in 28 years of QSO?
I ask these because they drive me nuts PLUS I am afraid of breaking LoTW's computer:
 
  • what does a REAL TIME upload do as opposed to UL which takes nanoseconds?
  • WHY wud I want an EOF tag?
  • what does RAW DATA contain, extra, that is of use?
  • precisely what does OVERWRITE EXISTING DATA write over?
I and my dearth of intuition thank-you.
 
73
 
Phil



Re: FW: ACLOG

JoAnn Donaldson
 

I am too stuck in the Queue. With the RTTY Contest a couple of weeks ago, I waited a couple of days before I looked to see if my file was listed in my account. Once I saw my file, I had ACLog do a download and WHAM confirmed contacts and the rest were Green with a Y for sent.

JoAnn
AB8YZ


On Monday, November 30, 2020, 04:14:37 PM CST, K8TS <dalecole3502@...> wrote:


That number seems high.  Even with the pandemic.  Usually only about 7-8K for each of the contests.  Total a little under 20k combined.

10k would be more believable.

Dale K8TS

 

Sent from Mail for Windows 10

 

From: KC7QY
Sent: Monday, November 30, 2020 4:40 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] FW: ACLOG

 

Jerry,

The LoTW Log Queue shows a 10 hour backlog in processing logs as of this afternoon. There were over 19k logs in the que.

JIm KC7QY

 


DXCC credits consolidation and tracking

Bo W4GHV
 

I shouldn't mention this here but still hope there is a solution.
I use the good ol' ACL and try to keep up with my DSCC credits, QSLs, etc. 
But getting it and LOTW or CLULOG to agree is impossible.

I thought LOTW contacts automatically went toward your DXCC certificate, but I did something there and it cost me $36 to get some credits. A fee and 10 cents per credit.
Anxious to see if that bumps up my credits.
Keeping track of the paperwork is a chore. Mailing DX QSLs & $, sending to the bureau, etc 

Some like the HRD logger. Is it any good? If so I'll import ACL into it periodically to 'balance the budget'
Help appreciated. 
--
73, Bo W4GHV since '54
https://www.qrz.com/db/W4GHV


Re: FW: ACLOG

K8TS
 

That number seems high.  Even with the pandemic.  Usually only about 7-8K for each of the contests.  Total a little under 20k combined.

10k would be more believable.

Dale K8TS

 

Sent from Mail for Windows 10

 

From: KC7QY
Sent: Monday, November 30, 2020 4:40 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] FW: ACLOG

 

Jerry,

The LoTW Log Queue shows a 10 hour backlog in processing logs as of this afternoon. There were over 19k logs in the que.

JIm KC7QY

 


Re: FW: ACLOG

KC7QY
 

Jerry,

The LoTW Log Queue shows a 10 hour backlog in processing logs as of this afternoon. There were over 19k logs in the que.

JIm KC7QY


Re: FW: ACLOG

Larry Banks
 

At this moment it is 11 hours after this weekend’s CQ WW CW.  Check here:  http://www.arrl.org/logbook-queue-status

73 -- Larry -- W1DYJ

 

Sent: Monday, November 30, 2020 16:21
Subject: Re: [N3FJPSoftwareUsers] FW: ACLOG
 
Perhaps not, there was a backlog of 5-6 hours in LOTW right after the SSB Sweepstakes. I would say to try again in a while.
 
73 de Joe KJ8O
 
Survivor of the 2011 CQWW DX contest when the LOTW backlog ran for almost a week.
 
On Mon, Nov 30, 2020, 1:17 PM Jerry W1IE <jfk@...> wrote:

GA Scott,

 

This morning after I had done my processing for the CQWWCW contest, I started up the N3FJP logging software to upload the ADIF file. Much to my surprised, the program presented itself as a “newly installed program in that I had to provide a password (which I had) and then do the setup. It also created a brand-new empty database.

 

Since I use Microsoft’s file History program, it was not difficult to jump back to Nov. 27th and download the files. There all seem quite well and I uploaded the ADIF file with no problems. I then opened the LOTW in your software and did an update. I waited until late this afternoon and did a query on LOTW expecting 400+ entries to be returned with the “Sent” value to be a “Y”. But nothing came back. Tried several times even changing the QSO RX DATE and still no joy. The following is what I did received.

 

 

Retrieving records from LoTW.  Please wait for a response from the LoTW server...

 

LoTW Data received...

 

ARRL Logbook of the World Status Report

Generated at 2020-11-30 20:55:00

for w1ie

Query:

     OWNCALL: W1IE

    QSL ONLY: NO

QSO RX SINCE: 2020-11-27 00:00:00 (user supplied value)

 

<PROGRAMID:4>LoTW

<APP_LoTW_NUMREC:1>0

 

<eoh>

 

<APP_LoTW_EOF>

 

 

 

Complete download confirmed...

 

Processing...

 

 

Processing complete.  Updates, if any, have been incorporated into your database.  Please click Done to proceed.

 

Have I completely “messed” up my installation of your software?

 

Best regards,

 

Jerry Knowlton, W1IE

 

 

 


Re: FW: ACLOG

Lou Everett, Sr. <loueverettsr@...>
 

Yes!  More than likely a lot of processing to go on.  Wait until late tonight or tomorrow morning.

Lou WA5LOU


On Mon, Nov 30, 2020 at 4:22 PM Joseph Miller <kj8o.ham@...> wrote:
Perhaps not, there was a backlog of 5-6 hours in LOTW right after the SSB Sweepstakes. I would say to try again in a while.

73 de Joe KJ8O

Survivor of the 2011 CQWW DX contest when the LOTW backlog ran for almost a week.

On Mon, Nov 30, 2020, 1:17 PM Jerry W1IE <jfk@...> wrote:

GA Scott,

 

This morning after I had done my processing for the CQWWCW contest, I started up the N3FJP logging software to upload the ADIF file. Much to my surprised, the program presented itself as a “newly installed program in that I had to provide a password (which I had) and then do the setup. It also created a brand-new empty database.

 

Since I use Microsoft’s file History program, it was not difficult to jump back to Nov. 27th and download the files. There all seem quite well and I uploaded the ADIF file with no problems. I then opened the LOTW in your software and did an update. I waited until late this afternoon and did a query on LOTW expecting 400+ entries to be returned with the “Sent” value to be a “Y”. But nothing came back. Tried several times even changing the QSO RX DATE and still no joy. The following is what I did received.

 

 

Retrieving records from LoTW.  Please wait for a response from the LoTW server...

 

LoTW Data received...

 

ARRL Logbook of the World Status Report

Generated at 2020-11-30 20:55:00

for w1ie

Query:

     OWNCALL: W1IE

    QSL ONLY: NO

QSO RX SINCE: 2020-11-27 00:00:00 (user supplied value)

 

<PROGRAMID:4>LoTW

<APP_LoTW_NUMREC:1>0

 

<eoh>

 

<APP_LoTW_EOF>

 

 

 

Complete download confirmed...

 

Processing...

 

 

Processing complete.  Updates, if any, have been incorporated into your database.  Please click Done to proceed.

 

Have I completely “messed” up my installation of your software?

 

Best regards,

 

Jerry Knowlton, W1IE

 

 

 


Re: FW: ACLOG

Joseph Miller
 

Perhaps not, there was a backlog of 5-6 hours in LOTW right after the SSB Sweepstakes. I would say to try again in a while.

73 de Joe KJ8O

Survivor of the 2011 CQWW DX contest when the LOTW backlog ran for almost a week.

On Mon, Nov 30, 2020, 1:17 PM Jerry W1IE <jfk@...> wrote:

GA Scott,

 

This morning after I had done my processing for the CQWWCW contest, I started up the N3FJP logging software to upload the ADIF file. Much to my surprised, the program presented itself as a “newly installed program in that I had to provide a password (which I had) and then do the setup. It also created a brand-new empty database.

 

Since I use Microsoft’s file History program, it was not difficult to jump back to Nov. 27th and download the files. There all seem quite well and I uploaded the ADIF file with no problems. I then opened the LOTW in your software and did an update. I waited until late this afternoon and did a query on LOTW expecting 400+ entries to be returned with the “Sent” value to be a “Y”. But nothing came back. Tried several times even changing the QSO RX DATE and still no joy. The following is what I did received.

 

 

Retrieving records from LoTW.  Please wait for a response from the LoTW server...

 

LoTW Data received...

 

ARRL Logbook of the World Status Report

Generated at 2020-11-30 20:55:00

for w1ie

Query:

     OWNCALL: W1IE

    QSL ONLY: NO

QSO RX SINCE: 2020-11-27 00:00:00 (user supplied value)

 

<PROGRAMID:4>LoTW

<APP_LoTW_NUMREC:1>0

 

<eoh>

 

<APP_LoTW_EOF>

 

 

 

Complete download confirmed...

 

Processing...

 

 

Processing complete.  Updates, if any, have been incorporated into your database.  Please click Done to proceed.

 

Have I completely “messed” up my installation of your software?

 

Best regards,

 

Jerry Knowlton, W1IE

 

 

 


FW: ACLOG

Jerry W1IE
 

GA Scott,

 

This morning after I had done my processing for the CQWWCW contest, I started up the N3FJP logging software to upload the ADIF file. Much to my surprised, the program presented itself as a “newly installed program in that I had to provide a password (which I had) and then do the setup. It also created a brand-new empty database.

 

Since I use Microsoft’s file History program, it was not difficult to jump back to Nov. 27th and download the files. There all seem quite well and I uploaded the ADIF file with no problems. I then opened the LOTW in your software and did an update. I waited until late this afternoon and did a query on LOTW expecting 400+ entries to be returned with the “Sent” value to be a “Y”. But nothing came back. Tried several times even changing the QSO RX DATE and still no joy. The following is what I did received.

 

 

Retrieving records from LoTW.  Please wait for a response from the LoTW server...

 

LoTW Data received...

 

ARRL Logbook of the World Status Report

Generated at 2020-11-30 20:55:00

for w1ie

Query:

     OWNCALL: W1IE

    QSL ONLY: NO

QSO RX SINCE: 2020-11-27 00:00:00 (user supplied value)

 

<PROGRAMID:4>LoTW

<APP_LoTW_NUMREC:1>0

 

<eoh>

 

<APP_LoTW_EOF>

 

 

 

Complete download confirmed...

 

Processing...

 

 

Processing complete.  Updates, if any, have been incorporated into your database.  Please click Done to proceed.

 

Have I completely “messed” up my installation of your software?

 

Best regards,

 

Jerry Knowlton, W1IE

 

 

 

1721 - 1740 of 46856