Date   

Linux Mint 20

Walter
 

Hello All,

My Windows 7 PC died so I have switched to Linux Mint 20 with Wine.

I have loaded the ACLOG and it opens and has registered.

I have a backed up copy of my log but when I try to load it I get and Error 0  It says it "cannot find table 0"

What do I need to do to get this to work?

Also I cannot connect the rig.  However FlRig and Fldigi both connect to my rig so I know the connection is possible.  Of course the Com ports in Wine do not match the selections needed for Linux 

Has anyone succeeded in connecting to their rig in the ACLog on linux?
Is there a way to get the data through FlRig as Fldigi does?

Thanks for your comments  and help

Walter W9KJO


Re: N3FJPSoftwareUsers] Transfer of QSO from contest logs the ACL vis API

Larry Stowell K1ZW
 

Thanks Steve

I see the selection in the file drop down(xfer API). All is well.

73 Larry K1ZW


On 11/5/2020 9:20 PM, AI3KS wrote:
Larry,

They QSOs won't transfer "real time". The ADI transfer is for after the contest to put the entire contest log into ACLog. The other option is used to tie multiple programs together so that the main program communicates with the rig and cw interfaces.

Hope this makes sense.

Steve, AI3KS

On 20/11/05 18:53, Larry Stowell K1ZW wrote:
I need help also I have ACl check as the server and ARRL ss as client. I entered

some contacts and they don't show up in ACL.? I must have missed something.

73 Larry K1ZW









Re: Sweepstakes Clean Sweep now 84 Sections

Tanner Jones, W9TWJ
 

Looking forward to it - it’s my favorite contest.

Hope to work you again this year Scott under W5RRR.

73,
Tanner


Re: Sweepstakes Clean Sweep now 84 Sections

Scott Davis
 

Hi Bruce,

Thanks for writing.  I added PE immediately after it was announced back in January, so as long as you are running 7.1, you are all set.

http://www.n3fjp.com/Revision/SSRevision.htm

Enjoy Sweepstakes and good luck on your quest for the sweep!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bruce Vanselow N8BV <n8bvbruce@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Nov 6, 2020 12:45 am
Subject: [N3FJPSoftwareUsers] Sweepstakes Clean Sweep now 84 Sections

The following was taken from the ARRL Letter dated 11/5/20

A Sweepstakes "Clean Sweep" Means Working 84 Sections This Year
The ever-popular ARRL November Sweepstakes (SS) weekends are upon us -- one for CW and the other for SSB. This year, participants will have to search out an additional Section. The CW event takes place November 7 - 9 (UTC), and the SSB event is from November 21 - 23 (UTC). Each Sweepstakes leg begins at 2100 UTC on Saturday and runs through 0259 UTC on Monday. Stations may operate 24 of the available 30 hours. An SS Operating Guide package, available via the SS web page, explains how to participate in Sweepstakes. Clubs or public service teams that are considering participating in SS will find
the guide to be a useful source for information. This year marks the 79th SS event, which attracts more than 3,000 entries each fall for both weekends.
The number of ARRL and Radio Amateurs of Canada (RAC) Sections rose to 84 earlier this year with the addition of Prince Edward Island (PE) as a separate entity. The objective of SS -- or "sweeps" -- is to work as many stations in as many of the 84 Sections as possible within 24 hours of operating. The number of Sections worked is a score multiplier, and working all of them -- a "clean sweep" in SS terminology -- is the goal of many SS aficionados, who qualify for a clean sweep coffee mug. Hardcore SS operators try to run up the contact and multiplier counts by operating for the allowed 24 hours.
Some multipliers are rarer and/or harder to work, and these can vary from year to year. For many years, the most difficult SS multiplier was considered to be Northern Territories (NT) in Canada, where J. Allen, VY1JA, in Yukon Territory, was often the only station available. Allen has stepped back from amateur radio, however, owing to health issues. Making a clean sweep also requires working Alaska and Hawaii (or another station in the Pacific Section), as well as Newfoundland/Labrador (NL) and Prince Edward Island (PE) in the other direction. On the rarer side, finding -- and working -- stations in Alberta (AB), North Dakota (ND), Northern New York (NNY), US Virgin Islands (VI), Wyoming (WY), and Delaware (DE) has proven vexing for some SS operators.
Nonetheless, even stations with modest equipment and antennas can
enjoy success. Many stations like to operate in the QRP category (with an output of 5 W or less), although that challenge has been more daunting at this point in the solar cycle.
ARRL November Sweepstakes is the oldest domestic radiosport event (the first was in 1930). The SS contest exchange has deep roots in message-handling protocol and replicates a radiogram preamble. In SS, stations exchange:
  • A consecutive serial number (NR). Operators do not have to add zeros ahead of numbers less than 100.
  • Operating category (Precedence) -- Q for Single Operator, QRP; A for Single Operator, Low Power (up to 150 W output); B for Single Operator, High Power (greater than 150 W output); U for Single Operator, Unlimited, regardless of power; M for Multioperator, regardless of power, and S for School Club.
  • Your call sign.
  • Check (CK) -- the last two digits of the year of first license for either operator or station.
  • Section -- ARRL/RAC Section.
Full contest rules and an Operating Guide that includes examples of log formatting are available on the Sweepstakes web page. The deadline to submit CW entries is November 16. The deadline to submit phone entries is November 30.
Direct questions to the ARRL Contest Program.


Re: AVLog

Scott Davis
 

Hi JoAnn,

Thanks for writing.  On the awards form, enter DIG in the mode field.

Capture.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Nov 5, 2020 9:27 pm
Subject: Re: [N3FJPSoftwareUsers] AVLog

JoAnn,

Don't know if this will do what you want, but I just checked and all of my contacts (contest or not) have something in the Mode (tst) column. If you click on the header, it will sort your contacts by mode. You could then look for DIG and compare the QSOs showing that mode.

Steve, AI3KS

On 20/11/05 20:37, JoAnn Donaldson via groups.io wrote:
I want to track my Digital Contacts. That is FT8/FT4/RTTY/PSK31 and etc. I went into the Amateur Location Worked List. I could not figure out how to track this. I want to compare what I have in my Master Log with what I have in LOTW?

JoAnn
AB8YZ


Sweepstakes Clean Sweep now 84 Sections

Bruce Vanselow N8BV
 

The following was taken from the ARRL Letter dated 11/5/20

A Sweepstakes "Clean Sweep" Means Working 84 Sections This Year

The ever-popular ARRL November Sweepstakes (SS) weekends are upon us -- one for CW and the other for SSB. This year, participants will have to search out an additional Section. The CW event takes place November 7 - 9 (UTC), and the SSB event is from November 21 - 23 (UTC). Each Sweepstakes leg begins at 2100 UTC on Saturday and runs through 0259 UTC on Monday. Stations may operate 24 of the available 30 hours. An SS Operating Guide package, available via the SS web page, explains how to participate in Sweepstakes. Clubs or public service teams that are considering participating in SS will find

the guide to be a useful source for information. This year marks the 79th SS event, which attracts more than 3,000 entries each fall for both weekends.

The number of ARRL and Radio Amateurs of Canada (RAC) Sections rose to 84 earlier this year with the addition of Prince Edward Island (PE) as a separate entity. The objective of SS -- or "sweeps" -- is to work as many stations in as many of the 84 Sections as possible within 24 hours of operating. The number of Sections worked is a score multiplier, and working all of them -- a "clean sweep" in SS terminology -- is the goal of many SS aficionados, who qualify for a clean sweep coffee mug. Hardcore SS operators try to run up the contact and multiplier counts by operating for the allowed 24 hours.

Some multipliers are rarer and/or harder to work, and these can vary from year to year. For many years, the most difficult SS multiplier was considered to be Northern Territories (NT) in Canada, where J. Allen, VY1JA, in Yukon Territory, was often the only station available. Allen has stepped back from amateur radio, however, owing to health issues. Making a clean sweep also requires working Alaska and Hawaii (or another station in the Pacific Section), as well as Newfoundland/Labrador (NL) and Prince Edward Island (PE) in the other direction. On the rarer side, finding -- and working -- stations in Alberta (AB), North Dakota (ND), Northern New York (NNY), US Virgin Islands (VI), Wyoming (WY), and Delaware (DE) has proven vexing for some SS operators.

Nonetheless, even stations with modest equipment and antennas can

enjoy success. Many stations like to operate in the QRP category (with an output of 5 W or less), although that challenge has been more daunting at this point in the solar cycle.

ARRL November Sweepstakes is the oldest domestic radiosport event (the first was in 1930). The SS contest exchange has deep roots in message-handling protocol and replicates a radiogram preamble. In SS, stations exchange:

  • A consecutive serial number (NR). Operators do not have to add zeros ahead of numbers less than 100.

  • Operating category (Precedence) -- Q for Single Operator, QRP; A for Single Operator, Low Power (up to 150 W output); B for Single Operator, High Power (greater than 150 W output); U for Single Operator, Unlimited, regardless of power; M for Multioperator, regardless of power, and S for School Club.

  • Your call sign.

  • Check (CK) -- the last two digits of the year of first license for either operator or station.

  • Section -- ARRL/RAC Section.

Full contest rules and an Operating Guide that includes examples of log formatting are available on the Sweepstakes web page. The deadline to submit CW entries is November 16. The deadline to submit phone entries is November 30.

Direct questions to the ARRL Contest Program.



Re: N3FJPSoftwareUsers] Transfer of QSO from contest logs the ACL vis API

Bill Grover
 

The API link will also tell you if you have worked country or not in your main log.

Bill, N3EYF

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] N3FJPSoftwareUsers] Transfer of QSO
from contest logs the ACL vis API
From: "AI3KS" <AI3KS.01@...>
Date: Thu, November 05, 2020 9:20 pm
To: N3FJPSoftwareUsers@groups.io

Larry,

They QSOs won't transfer "real time". The ADI transfer is for after the contest to put the entire contest log into ACLog. The other option is used to tie multiple programs together so that the main program communicates with the rig and cw interfaces.

Hope this makes sense.

Steve, AI3KS

On 20/11/05 18:53, Larry Stowell K1ZW wrote:
I need help also I have ACl check as the server and ARRL ss as client. I entered

some contacts and they don't show up in ACL.? I must have missed something.

73 Larry K1ZW









Re: AVLog

AI3KS
 

JoAnn,

Don't know if this will do what you want, but I just checked and all of my contacts (contest or not) have something in the Mode (tst) column. If you click on the header, it will sort your contacts by mode. You could then look for DIG and compare the QSOs showing that mode.

Steve, AI3KS

On 20/11/05 20:37, JoAnn Donaldson via groups.io wrote:
I want to track my Digital Contacts. That is FT8/FT4/RTTY/PSK31 and etc. I went into the Amateur Location Worked List. I could not figure out how to track this. I want to compare what I have in my Master Log with what I have in LOTW?

JoAnn
AB8YZ


Re: N3FJPSoftwareUsers] Transfer of QSO from contest logs the ACL vis API

AI3KS
 

Larry,

They QSOs won't transfer "real time". The ADI transfer is for after the contest to put the entire contest log into ACLog. The other option is used to tie multiple programs together so that the main program communicates with the rig and cw interfaces.

Hope this makes sense.

Steve, AI3KS

On 20/11/05 18:53, Larry Stowell K1ZW wrote:
I need help also I have ACl check as the server and ARRL ss as client. I entered

some contacts and they don't show up in ACL.? I must have missed something.

73 Larry K1ZW









AVLog

JoAnn Donaldson
 

I want to track my Digital Contacts. That is FT8/FT4/RTTY/PSK31 and etc. I went into the Amateur Location Worked List. I could not figure out how to track this. I want to compare what I have in my Master Log with what I have in LOTW?

JoAnn
AB8YZ


Re: Frequency Chart on Start-up

Scott Krell
 

Thanks for the response Scott.  Found it, all set.  Can't tell you how many times I looked at the menu options and glanced right over it. 

THANKS,
Scott


N3FJPSoftwareUsers] Transfer of QSO from contest logs the ACL vis API

Larry Stowell K1ZW
 

I need help also I have ACl check as the server and ARRL ss as client. I entered

some contacts and they don't show up in ACL.? I must have missed something.

73 Larry K1ZW


Re: Transfer of QSO from contest logs the ACL vis API

Mel Marcus
 

I already do that, but was told there is a simpler way doing it via API, the export import method has not failed me.

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Transfer of QSO from contest logs the
ACL vis API
From: "Frank MacKenzie-Lamb" <maclamb@...>
Date: Thu, November 05, 2020 11:51 am
To: <N3FJPSoftwareUsers@groups.io>

How about just sampling doing an export on one and import on the other.  MUCH simpler
 
Frank
NG1I
 
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel Marcus
Sent: Wednesday, November 4, 2020 10:21 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Transfer of QSO from contest logs th ACL vis API
 
 
Awhile ago someone suggested that i could transfer contest logs to the ACL via API. I never got a response on how to do. currently i export and adif file from the contest software to the desktop, then i import the adif file into ACL. if there is and easier why, I would appreciate the procedure.
 
Mel NE9A


Re: Frequency Chart on Start-up

Scott Davis
 

Hi Scott,

Thanks for your e-mail.  Deselect this option here:

Capture.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Krell <skrell56@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Nov 5, 2020 1:47 pm
Subject: [N3FJPSoftwareUsers] Frequency Chart on Start-up

Hope someone smarter than I has the easy fix, as I am sure I just need to de-select something.  Whenever I start up ACLog, the Frequency Change window appears.  Just started recently.
Thanks, Scott
K1SMK


Re: CW Contest Exchange speed change

Neil Macklem
 

It appears you are increasing the CW speed by 3 on th 599 but reducing it only 1 on the 8, so every time you run this function you have a net gain of 2. 
If you want to have the 599 with 3 and the 8 only one slower, try adding a space with two sets after the 8 " )) ((

Neil
VE3SST

On Thu, 5 Nov 2020 at 8:46, Osvaldo
<kp4osp@...> wrote:

Hello N3FJP Users,

Hope all are doing well!

I am having a speed problem when setting a speed change on the exchange for a CW contact.  For example I have on the F2 trigger " (((599))) )8( " to send as the exchange for CQ WW.  When I trigger it it works once but the speed keeps increasing every time I use it.  I start at 30wpm and end up at 50 or so depending on how many time I hit F2.  I am currently using an IC-7610 with a winkeyer mini.  Any ideas on how to correct this or am I doing something wrong on my settings?

Thank you!
KP4OSP


Frequency Chart on Start-up

Scott Krell
 

Hope someone smarter than I has the easy fix, as I am sure I just need to de-select something.  Whenever I start up ACLog, the Frequency Change window appears.  Just started recently.
Thanks, Scott
K1SMK


Re: Transfer of QSO from contest logs th ACL vis API

Scott Davis
 

Hi Bill,

Thanks for your e-mail.  All fields containing values in the contest software are transferred to AC Log.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bill Grover <bgrover@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Nov 5, 2020 12:37 pm
Subject: Re: [N3FJPSoftwareUsers] Transfer of QSO from contest logs th ACL vis API

Scott,

is there a way to know what fields from the contest software are transferred and the fields in the ACL they go into?

I have taken Other6 and use it to store which rig I used and Other7 which antenna used.  If I can't put this into the contest DB and transfer it via API is there a way to load a specific value in these fields?

Thanks
Bill, N3EYF 


Re: province/state

Scott Davis
 

Hi Rino,

Thanks for your e-mail.  There is nothing in AC Log that removes existing data.

If you are referring to the Awards form, deselect the option to only show valid entries.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: VE9VIC...Rino <ve9vic@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Nov 5, 2020 12:04 pm
Subject: [N3FJPSoftwareUsers] province/state

For some reason I don't see the Canadian provinces in my column  with the states. Just notice that today, I believe I had them .
--
TS590SG, 100 Watts, off center fed dipole.

73, Rino
VE9VIC


Re: CW Contest Exchange speed change

Scott Davis
 

Hi Osvaldo,

Thanks for your e-mail.  If you have an equivalent number of speed characters (increasing and decreasing), your speed should wind up the same.  I wish I had something insightful to say, but I'm really not sure why you are experiencing that.  Perhaps someone else will have an idea.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Osvaldo <kp4osp@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Nov 5, 2020 8:44 am
Subject: [N3FJPSoftwareUsers] CW Contest Exchange speed change

Hello N3FJP Users,

Hope all are doing well!

I am having a speed problem when setting a speed change on the exchange for a CW contact.  For example I have on the F2 trigger " (((599))) )8( " to send as the exchange for CQ WW.  When I trigger it it works once but the speed keeps increasing every time I use it.  I start at 30wpm and end up at 50 or so depending on how many time I hit F2.  I am currently using an IC-7610 with a winkeyer mini.  Any ideas on how to correct this or am I doing something wrong on my settings?

Thank you!
KP4OSP


Re: Transfer of QSO from contest logs the ACL vis API

Frank MacKenzie-Lamb
 

How about just sampling doing an export on one and import on the other.  MUCH simpler

 

Frank
NG1I

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel Marcus
Sent: Wednesday, November 4, 2020 10:21 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Transfer of QSO from contest logs th ACL vis API

 

 

Awhile ago someone suggested that i could transfer contest logs to the ACL via API. I never got a response on how to do. currently i export and adif file from the contest software to the desktop, then i import the adif file into ACL. if there is and easier why, I would appreciate the procedure.

 

Mel NE9A

3261 - 3280 of 47870