1. N3FJPSoftwareUsers@groups.io
   Date   
Re: Change Font Size

Robert Johnston N9FB
 

Scott & Larry, 

Thank you for the head's up that upgrading to AC Log 6.7 yields the answer to my problem!
Eureka, I have found it! :-)

73 Rob N9FB ..
Re: Change Font Size

Scott Davis
 

Hi Rob,

Thanks for your follow up.  You'll find AC Log 6.7 here:

http://www.n3fjp.com/aclog.html

Upgrades are free to registered users.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Robert Johnston N9FB <robj22020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 3:42 pm
Subject: Re: [N3FJPSoftwareUsers] Change Font Size

Hi Scott, 

Thanks for the reply.  I dont have that option (Change Main Form Font) you pointed me to... When i open Appearance > Colors & Fonts , here is what i see: '


please advise,
thanks Rob N9FB

Re: Change Font Size

Larry Banks
 

Hi Rob,
 
Are you running the latest version of ACLog?

73 -- Larry -- W1DYJ

 

Sent: Saturday, October 31, 2020 15:42
Subject: Re: [N3FJPSoftwareUsers] Change Font Size
 
Hi Scott,

Thanks for the reply.  I dont have that option (Change Main Form Font) you pointed me to... When i open Appearance > Colors & Fonts , here is what i see: '


please advise,
thanks Rob N9FB

Re: Change Font Size

Robert Johnston N9FB
 

Hi Scott, 

Thanks for the reply.  I dont have that option (Change Main Form Font) you pointed me to... When i open Appearance > Colors & Fonts , here is what i see: '


please advise,
thanks Rob N9FB
Re: Change Font Size

Scott Davis
 

Hi Rob,

Thanks for your e-mail.  Responses are inserted:




-----Original Message-----
From: Robert Johnston N9FB <robj22020@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 12:57 pm
Subject: Re: [N3FJPSoftwareUsers] Change Font Size


Hi Scott, 
1. Is there any way to change the font of the TIME (UTC and local) -- they are too big right now and so get cut off at the bottom without fitting entirely in the field... 
(My display is a 20" monitor) 



**Click Settings > Appearance > Colors and Fonts and then click this button to adjust the font size:

BearingFont.JPG

2. I would also love to be able to make the 10-10 field wider so that it matches the width of the other fields, but can't find how to do that either. (apologies if i missed it)

**  Sorry, the field widths are currently user customizable.

3. Lastly, is there a way to choose "center" for a header like "Call" or Band?  I like to squeeze columns close together and centering the data keeps it from visually bleeding into adjacent columns . 

**  Sorry, no, the alignment is currently customizable either.

Sorry I was only one for three in answers you were hoping for Rob.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


Thanks and 73, 
Rob N9FB 
Re: Direction - Miles - Continent ???

Scott Davis
 

Hi Clint,

Thanks for your e-mail.  Click Settings > Appearance > Colors and Fonts and then click this button to adjust the font size:

BearingFont.JPG


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Clint Talmadge <clinttalmadge@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 12:27 pm
Subject: [N3FJPSoftwareUsers] Direction - Miles - Continent ???

I just fired up the radio and ACLog for the first time in a while. 

The section where Direction - Miles & Continent has changed font size. 
So tiny I have to get up close to my monitor (32") to read the data.
What did I do to screw it up? 

Clint - W5CPT -  

Re: Country search?

Pat Whelton
 

Hello Scott. Give this a try and see if it works:

- Enter country name in the country field
- Click on the header that says country
- A box should appear that shows Band, CW, DIG, PH

Hope this helps.

Regards,

Pat - KZ5J

-----Original Message-----
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Long
Sent: Saturday, October 31, 2020 11:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Country search?

How do I search for a single particular country in my log so I can see what bands & modes that have worked it on? I know that I can click on the Country heading, but that includes my whole entire log. That’s not what I want. I just want to see where I’ve worked one country. Thanks.


-=-=-=-=-=-=-=-=-=-=-=-
Re: Change Font Size

Robert Johnston N9FB
 


Hi Scott, 

1. Is there any way to change the font of the TIME (UTC and local) -- they are too big right now and so get cut off at the bottom without fitting entirely in the field... 
(My display is a 20" monitor) 



2. I would also love to be able to make the 10-10 field wider so that it matches the width of the other fields, but can't find how to do that either. (apologies if i missed it)

3. Lastly, is there a way to choose "center" for a header like "Call" or Band?  I like to squeeze columns close together and centering the data keeps it from visually bleeding into adjacent columns . 

Thanks and 73, 
Rob N9FB 
Direction - Miles - Continent ???

Clint Talmadge
 

I just fired up the radio and ACLog for the first time in a while. 

The section where Direction - Miles & Continent has changed font size. 
So tiny I have to get up close to my monitor (32") to read the data.
What did I do to screw it up? 

Clint - W5CPT -  
Re: Country search?

Scott Davis
 

Hi Scott,

Thanks for your e-mail.  For a list, type a country in the country field and then tab to the next field.  For a summary, click anywhere on the Blue Country label header.

Capture.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Long <Slong5816@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 12:09 pm
Subject: [N3FJPSoftwareUsers] Country search?

How do I search for a single particular country in my log so I can see what bands & modes that have worked it on? I know that I can click on the Country heading, but that includes my whole entire log. That’s not what I want. I just want to see where I’ve worked one country. Thanks.
Re: Setting for IC 746 Pro

Scott Davis
 

Hi W4OV,

Thanks for your e-mail.  You'll find the successful settings other 746 Pro users have sent along here:

http://www.n3fjp.com/help/righelp.html

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: w4ov@...
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 11:51 am
Subject: [N3FJPSoftwareUsers] Setting for IC 746 Pro

I just picked up an ICom 746Pro  does anyone have the settings handy? (to interface with  N3FJP logging program)

Country search?

Scott Long
 

How do I search for a single particular country in my log so I can see what bands & modes that have worked it on? I know that I can click on the Country heading, but that includes my whole entire log. That’s not what I want. I just want to see where I’ve worked one country. Thanks.
Re: FTDX101MP

Larry Stowell K1ZW
 

Scott you have to click "END TEST"

73 Larry K1ZW

On 10/30/2020 9:20 PM, scott ramesdorfer wrote:

 

Trying to interface program with my new FTDX101MP downloaded recommended driver from Yaesu unzipped and installed. Connected USB cable. Selected rig interface, selected “YAESU NEWER 2”  gave me the option of  com 3 or com 4 … selected com 3 and clicked on test…. Says “Polling Rig’ a lot of different symbols come up but never finishes test.. selecting com 4 gives me an error device attached to the system is not functioning?? Are there settings within my rig that I am missing.. PLEASE HELP !!

                                                           Thank you

                                                       KD2LAZ    (Scott)

 

 

Sent from Mail for Windows 10
Setting for IC 746 Pro

w4ov@...
 

I just picked up an ICom 746Pro  does anyone have the settings handy? (to interface with  N3FJP logging program)
Re: FTDX101MP

Scott Davis
 

Hi Scott,

Thanks for the good report!  Would you please click the Copy to Clipboard button on the rig interface form while polling your rig.  Then reply to this e-mail and click Edit > Paste.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: scott ramesdorfer <scott2464@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Oct 31, 2020 9:52 am
Subject: Re: [N3FJPSoftwareUsers] FTDX101MP

K9CHP FIXED thank you so much!! First shot and it worked! You guys are the best !!
                   KD2LAZ  Scott                            






On Oct 31, 2020, at 9:33 AM, Amir K9CHP <sarlabs@...> wrote:


Probably a bit rate mismatch. Try setting N3FJP to 38xxx (I don't remember the exact number, only one choice in this range) 

--

73 de Amir K9CHP

ARRL, Emergency Coordinator (EC)
Radio Amateurs of Greater Syracuse  www.ragsclub.org
Wilderness SAR (ret.) www.wsar.org
Eagle Valley Search Dogs (ret.) www.evdogs.org

On Sat, Oct 31, 2020, 07:41 Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi All,

If anyone can help Scott, KD2LAZ with his FTDX101MP, that would be super.  

Scott, with proper settings, when you click test, you should see mode and frequency appear.  The polling continues.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: scott ramesdorfer <scott2464@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Oct 30, 2020 9:20 pm
Subject: [N3FJPSoftwareUsers] FTDX101MP

 
Trying to interface program with my new FTDX101MP downloaded recommended driver from Yaesu unzipped and installed. Connected USB cable. Selected rig interface, selected “YAESU NEWER 2”  gave me the option of  com 3 or com 4 … selected com 3 and clicked on test…. Says “Polling Rig’ a lot of different symbols come up but never finishes test.. selecting com 4 gives me an error device attached to the system is not functioning?? Are there settings within my rig that I am missing.. PLEASE HELP !!
                                                           Thank you
                                                       KD2LAZ    (Scott)
 
 
Sent from Mail for Windows 10
Re: FTDX101MP

scott ramesdorfer
 

K9CHP FIXED thank you so much!! First shot and it worked! You guys are the best !!
                   KD2LAZ  Scott                            






On Oct 31, 2020, at 9:33 AM, Amir K9CHP <sarlabs@...> wrote:


Probably a bit rate mismatch. Try setting N3FJP to 38xxx (I don't remember the exact number, only one choice in this range) 

--

73 de Amir K9CHP

ARRL, Emergency Coordinator (EC)
Radio Amateurs of Greater Syracuse  www.ragsclub.org
Wilderness SAR (ret.) www.wsar.org
Eagle Valley Search Dogs (ret.) www.evdogs.org

On Sat, Oct 31, 2020, 07:41 Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi All,

If anyone can help Scott, KD2LAZ with his FTDX101MP, that would be super.  

Scott, with proper settings, when you click test, you should see mode and frequency appear.  The polling continues.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: scott ramesdorfer <scott2464@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Oct 30, 2020 9:20 pm
Subject: [N3FJPSoftwareUsers] FTDX101MP

 
Trying to interface program with my new FTDX101MP downloaded recommended driver from Yaesu unzipped and installed. Connected USB cable. Selected rig interface, selected “YAESU NEWER 2”  gave me the option of  com 3 or com 4 … selected com 3 and clicked on test…. Says “Polling Rig’ a lot of different symbols come up but never finishes test.. selecting com 4 gives me an error device attached to the system is not functioning?? Are there settings within my rig that I am missing.. PLEASE HELP !!
                                                           Thank you
                                                       KD2LAZ    (Scott)
 
 
Sent from Mail for Windows 10
Re: FTDX101MP

Amir K9CHP
 

Probably a bit rate mismatch. Try setting N3FJP to 38xxx (I don't remember the exact number, only one choice in this range) 

--

73 de Amir K9CHP

ARRL, Emergency Coordinator (EC)
Radio Amateurs of Greater Syracuse  www.ragsclub.org
Wilderness SAR (ret.) www.wsar.org
Eagle Valley Search Dogs (ret.) www.evdogs.org

On Sat, Oct 31, 2020, 07:41 Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi All,

If anyone can help Scott, KD2LAZ with his FTDX101MP, that would be super.  

Scott, with proper settings, when you click test, you should see mode and frequency appear.  The polling continues.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: scott ramesdorfer <scott2464@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Oct 30, 2020 9:20 pm
Subject: [N3FJPSoftwareUsers] FTDX101MP

 
Trying to interface program with my new FTDX101MP downloaded recommended driver from Yaesu unzipped and installed. Connected USB cable. Selected rig interface, selected “YAESU NEWER 2”  gave me the option of  com 3 or com 4 … selected com 3 and clicked on test…. Says “Polling Rig’ a lot of different symbols come up but never finishes test.. selecting com 4 gives me an error device attached to the system is not functioning?? Are there settings within my rig that I am missing.. PLEASE HELP !!
                                                           Thank you
                                                       KD2LAZ    (Scott)
 
 
Sent from Mail for Windows 10
Re: FTDX101MP

Scott Davis
 

Hi All,

If anyone can help Scott, KD2LAZ with his FTDX101MP, that would be super.  

Scott, with proper settings, when you click test, you should see mode and frequency appear.  The polling continues.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: scott ramesdorfer <scott2464@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Oct 30, 2020 9:20 pm
Subject: [N3FJPSoftwareUsers] FTDX101MP

 
Trying to interface program with my new FTDX101MP downloaded recommended driver from Yaesu unzipped and installed. Connected USB cable. Selected rig interface, selected “YAESU NEWER 2”  gave me the option of  com 3 or com 4 … selected com 3 and clicked on test…. Says “Polling Rig’ a lot of different symbols come up but never finishes test.. selecting com 4 gives me an error device attached to the system is not functioning?? Are there settings within my rig that I am missing.. PLEASE HELP !!
                                                           Thank you
                                                       KD2LAZ    (Scott)
 
 
Sent from Mail for Windows 10
FTDX101MP

scott ramesdorfer
 

 

Trying to interface program with my new FTDX101MP downloaded recommended driver from Yaesu unzipped and installed. Connected USB cable. Selected rig interface, selected “YAESU NEWER 2”  gave me the option of  com 3 or com 4 … selected com 3 and clicked on test…. Says “Polling Rig’ a lot of different symbols come up but never finishes test.. selecting com 4 gives me an error device attached to the system is not functioning?? Are there settings within my rig that I am missing.. PLEASE HELP !!

                                                           Thank you

                                                       KD2LAZ    (Scott)

 

 

Sent from Mail for Windows 10
Re: LOTW Download Question

Scott Davis
 

Hi Larry,

Thanks for your e-mail.  From that date forward.  It is only necessary to do the All Data Download once when you first start.  Really never, as the original All Since date is prior to any Qs you would have in your log.  Routinely using All Since and Confirmed Since will do the trick.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Krist <roanin2009@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Oct 30, 2020 12:42 pm
Subject: [N3FJPSoftwareUsers] LOTW Download Question

When downloading from LOTW and you put in a date such as 5/1/2020 will
it download all the confirmations that have been made on your account,
or only the ones from that date forward. Reason I ask, is I tried to
download from 1/1/1980 and it will run for a long time, but never
finish, it locks up the program after it begins to process the
information. Thus, is it necessary to do the complete download
periodically or just once.

Larry  N8CWU


--
This email has been checked for viruses by Avast antivirus software.
2381 - 2400 of 46920