1. N3FJPSoftwareUsers@groups.io
   Date   
Re: Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

AI3KS
 

Scott

It couldn't have been easier!

Steve, AI3KS

On 20/10/21 06:22, Scott Davis via groups.io wrote:
Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Re: Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Dan Morris
 

Scott - I must say, that was about the easiest one can get.  It came up and said there was an upgrade, pressed the upgrade button, shut down, download upgrade, restarted and now it says ver 0.9 and the previous log came right back in.

Like you said EZPZ.  Thanks so much my friend.

Dan Morris  KZ3T

I live to live for Him!



On Oct 21, 2020, at 6:22 AM, Scott Davis via groups.io <SNKDavis@...> wrote:

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Re: Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Larry Stowell K1ZW
 

Wow

That was painless very smooth no hiccups.

73 Larry K1ZW

On 10/21/2020 6:22 AM, Scott Davis via groups.io wrote:
Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Re: Phase II: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Scott Davis
 

Hi Gang,

We are ready for Phase II, which if all goes well, will be EZPZ.  Please:

1.  Start version 0.8 of the WW Digi DX software you installed yesterday.   If all goes well, it will alert you to a new version and give you the option to upgrade.

2.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 yesterday should come right up).

3.  Please us know how you make out!!!

Thanks in advance for completing the test!  I'm very eager to hear how you make out!

By the way, as always, the addition of the WW Digi DX software is free to package users.  Please just e-mail us direct for your password.

Thanks again!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Tue, Oct 20, 2020 10:19 am
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):

http://www.n3fjp.com/programs/WWDIGIDX.exe

2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Re: Python Script

Scott Davis
 

Thanks loads JoAnn!  :)

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 19, 2020 5:47 pm
Subject: [N3FJPSoftwareUsers] Python Script

I attempted to use the Python Script with JTDX in order to be able to Log Contacts to my N3FJp ACLogger that resides on another computer. An error was discovered that would not allow the Script to work with JTDX. I contacted  Dave Slotter, W3DJS and we worked out the kinks.



 
 
 
 
Dave sent me an email saying
I put in a change to support JTDX. You can pick up the updated script here: https://github.com/dslotter/wsjtx_to_n3fjp
 
This will correct the error. Now it works on both JTDX and WSJT-X.
 
JoAnn - AB8YZ
 
Re: New Windows 10 Update

Scott Davis
 

Awesome, thanks for the good report Mark!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mark Nelson <aa6dx7388@...>
To: N3FJPSoftwareUsers@groups.io Group Moderators <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Oct 20, 2020 11:33 pm
Subject: [N3FJPSoftwareUsers] New Windows 10 Update


Just an FYI...ACL seems to be working swell in the newest version of Windows 10... 10/20/2020   --- 73 Mark  AA6DX
Re: Com 3 Port problem fixed``

Scott Davis
 

Thanks for the good report Jeff!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff KB6CA <jeffgin@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 20, 2020 7:27 pm
Subject: [N3FJPSoftwareUsers] Com 3 Port problem fixed``

Scott,  my computer guru friend had the answer:  unplug my desktop PC and plug it back in.  The error msg went away and my links with DX Spotting now works again.
 
Jeff KB6CA
New Windows 10 Update

Mark Nelson
 


Just an FYI...ACL seems to be working swell in the newest version of Windows 10... 10/20/2020   --- 73 Mark  AA6DX
Com 3 Port problem fixed``

Jeff KB6CA
 

Scott,  my computer guru friend had the answer:  unplug my desktop PC and plug it back in.  The error msg went away and my links with DX Spotting now works again.

 

Jeff KB6CA
Re: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

JoAnn Donaldson
 

I have 23 entries. I also got this when I told it to install.Inline image
I told it to go ahead and it installed OK. Each time I fire it up it asks for a Serial Number Code. I just bypass this and it runs OK.

JoAnn - AB8YZ


On Tuesday, October 20, 2020, 3:42:44 PM CDT, Scott Davis via groups.io <snkdavis@...> wrote:


Thanks Dave and all who have replied direct.

We will try Phase II in the morning!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave via groups.io <kc3am@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 20, 2020 4:15 pm
Subject: Re: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Scott,

I have entered 31 contacts and it closed down as it should.
When I started I did get the windows warning and chose to run anyway.
Ready for phase II

Dave KC3AM

On 10/20/2020 10:19, Scott Davis via groups.io wrote:
Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

--
Hams should be seen as well as heard, 73, Dave KC3AM
Get "Denied" msg

Jeff KB6CA
 

Hi Scott,

 

When I bring up ACL I now get “Access to the port “Com 3” is denied.  Up to this afternoon I’ve just clicked OK on the message and ACL works fine as usual.  This has been happening for the last few days.  However, this afternoon, I’ve gone through the same routine to bring up ACL and have encountered another problem.  ACL is working fine, but now, when I click on a station in the DX Spotting Window, nothing happens.  I checked on my QRZ connection just to make sure that was working correctly, and it is, the images come up fine.

 

I don’t believe I’ve changed anything on ACL. 

 

Thanks.

 

Jeff KB6CA
Re: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Scott Davis
 

Thanks Dave and all who have replied direct.

We will try Phase II in the morning!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave via groups.io <kc3am@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 20, 2020 4:15 pm
Subject: Re: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Scott,

I have entered 31 contacts and it closed down as it should.
When I started I did get the windows warning and chose to run anyway.
Ready for phase II

Dave KC3AM

On 10/20/2020 10:19, Scott Davis via groups.io wrote:
Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

--
Hams should be seen as well as heard, 73, Dave KC3AM
Re: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Dave
 

Scott,

I have entered 31 contacts and it closed down as it should.
When I started I did get the windows warning and chose to run anyway.
Ready for phase II

Dave KC3AM

On 10/20/2020 10:19, Scott Davis via groups.io wrote:
Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

--
Hams should be seen as well as heard, 73, Dave KC3AM
Re: LOTW upload not working.

Scott Davis
 

Hi Dave,

Thanks for your e-mail.  This FAQ will get you going:


http://www.n3fjp.com/faq.html#q32

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave Tucker Nu4N <dwtucker19@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 20, 2020 1:58 pm
Subject: [N3FJPSoftwareUsers] LOTW upload not working.

After a qso I auto up load to eqsl. No problem. But it does not autolog LOTW, nor shows a LOTW when I do an Edit call.
I go to LOTW website and search the call and it shows it has been uploaded.
Any thoughts Scott ??
Dave NU4N 73

Re: LOTW upload not working.

Dave Tucker Nu4N
 

Ok Mel tnx for the reply. I just upgraded to 6.7 from 6.5.version, Doing the same as before. Oh Well no biggie just thought there was some thing I was doing wrong. 73 Dave NU4N
Re: LOTW upload not working.

Mel Marcus
 

Dave

I think i know what is happening. When I first send a contact to LOTW the contact is in black, just showing I had a contact, but has really been sent to the LOTW queue. LOTW will process the contact when it has time. after it has been accepted it shows in qso in LOTW, but for you to see a green contact, you will have to download since, that will turn your contact line to green and show a qsl sent,. if the contact has already submitted his LOTW it will come back with qls sent and received and the line will be blue. if it is only/still green than at a later time you can do the confirmed since and if the contact has finally upload the contact information, it will change to blue.

Mel
NE9A


-------- Original Message --------
Subject: [N3FJPSoftwareUsers] LOTW upload not working.
From: "Dave Tucker Nu4N" <dwtucker19@...>
Date: Tue, October 20, 2020 12:58 pm
To: N3FJPSoftwareUsers@groups.io

After a qso I auto up load to eqsl. No problem. But it does not autolog LOTW, nor shows a LOTW when I do an Edit call.
I go to LOTW website and search the call and it shows it has been uploaded.
Any thoughts Scott ??
Dave NU4N 73

LOTW upload not working.

Dave Tucker Nu4N
 

After a qso I auto up load to eqsl. No problem. But it does not autolog LOTW, nor shows a LOTW when I do an Edit call.
I go to LOTW website and search the call and it shows it has been uploaded.
Any thoughts Scott ??
Dave NU4N 73
Re: ACLog and Windows

Archibald Delfish
 

I wanna know too!
73 de N2NWK

On Oct 20, 2020, at 12:39 PM, Dan Morris <dbmorris315@gmail.com> wrote:

Anyone running VMWare Fusion and windows on a MAC and using ACLog please let me know as I have a question off list for you. Thanks

Dan Morris KZ3T
dbmorris315@gmail.com
Re: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Scott Davis
 

Hi Mel,

Please e-mail us directly for your password and Kimberly will get that out to you.

Thanks for your testing!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Oct 20, 2020 1:16 pm
Subject: Re: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Scott

Which password should I use.

Mel
NE9A
-------- Original Message --------
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi
Software! (I REALLY Need Your Help This Time)
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Tue, October 20, 2020 9:19 am
To: "n3fjpsoftwareusers@groups.io" <n3fjpsoftwareusers@groups.io>

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
Re: PLEASE Test New Install Method & WW Digi Software! (I REALLY Need Your Help This Time)

Mel Marcus
 

Scott

Which password should I use.

Mel
NE9A

-------- Original Message --------
Subject: [N3FJPSoftwareUsers] PLEASE Test New Install Method & WW Digi
Software! (I REALLY Need Your Help This Time)
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Tue, October 20, 2020 9:19 am
To: "n3fjpsoftwareusers@groups.io" <n3fjpsoftwareusers@groups.io>

Hi All,

There's been lots going on at N3FJP Software headquarters!  Chris, KB3KCN and I are developing a new installation method that will affect all our software and we are adding support for the WW Digi contest, too!

We are at a point in the process where we really need your help testing both.  Briefly:

- We have been vetted and granted a code signing certificate.  Future releases of our software, including the WW Digi software that we need you to test now, will be digitally signed as Affirmatech Inc.  You will still see the Windows SmartScreen window right after new releases, but it should reduce other warnings you receive, depending on the Internet protection software that you use.

-  Each program will automatically alert you when an upgrade is available.

-  The upgrade path will be far easier - literally one click - after you install the next release of each of our programs.  No more need to uninstall from Windows Control Panel!


Your Testing Steps:

Everything is working fine here, but we really need as many folks testing this as possible.  We definitely want any anomalies with test contest data, not any real data, so please help us with the following test:

1.  Please install the WW Digi software (it will install as version 0.8):


2.  Enter some test contacts (and give the WW Digi software a good test while you are at it)

3.  Let me know that you have entered some test data (either here or direct (snkdavis@...)) and that you are ready for Phase II of the test.

4.  I will make a change on the web site, after I have heard from enough folks for a good test, so that the software knows an upgrade is available next time you start it,

5.  I will ask you to start the software when we are ready for Phase II.  If all goes well, it will alert you to a new version and give you the option to upgrade.

6.  Click the upgrade button (it should restart automatically as 0.9 and the test QSOs you entered in 0.8 should come right up).

7.  Please us know how you make out!!!

All, please give this a go.  Thanks in advance!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
2601 - 2620 of 46962