Date   

Re: SDQP log missing

Scott Davis
 

Hi Dale,

Thanks for your e-mail.  To see the default location of your log file, click File > Show File Locations.  If you clicked File > Save As and saved to another location, you'll need to remember the file name you gave it and where you saved it.

The default location in AC Log is:

C:\Users\YourWindowsUserProfile\My Documents\Affirmatech\N3FJP Software\ACLog\NameYouGaveYourContestLog.mdb

AC Log isn't designed for contesting and therefore will not create the Cabrillo file, score your log, etc.  In the future, always use the proper contest program for each contest.  You'll find the South Dakota QSO Party software here:

http://www.n3fjp.com/stateqsoparty.html

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 12, 2020 10:00 am
Subject: Re: [N3FJPSoftwareUsers] SDQP log missing

Dale,

Assuming that you used the South Dakota QSO Party software, look here:

C:\Users\Username\Documents\Affirmatech\N3FJP Software\SD-QSO-Party-OutOfState

Hope this helps.

Steve, AI3KS
On 20/10/12 09:42, Dale Martin wrote:
This morning, I went to open the SDQP log I created in ACL yesterday. Nothing. No log anywhere.  It was my first time creating a contest log in ACL. Where does the contest log data go? The Loggiing seemed to log my QSOs in spite not being connected to a radio. N1MM was using the port for PAQP.
 
Any suggestions to locate the SDQP log would be appreciated.
 
73,
Dale, kg5u


Re: SDQP log missing

AI3KS
 

If that is the case, then change the last directory entry to ACLog.

On 20/10/12 10:03, Lou Everett, Sr. wrote:
He did say he used ACL.  

On Mon, Oct 12, 2020 at 10:01 AM AI3KS <AI3KS.01@...> wrote:
Dale,

Assuming that you used the South Dakota QSO Party software, look here:

C:\Users\Username\Documents\Affirmatech\N3FJP Software\SD-QSO-Party-OutOfState

Hope this helps.

Steve, AI3KS
On 20/10/12 09:42, Dale Martin wrote:

This morning, I went to open the SDQP log I created in ACL yesterday. Nothing. No log anywhere.  It was my first time creating a contest log in ACL. Where does the contest log data go? The Loggiing seemed to log my QSOs in spite not being connected to a radio. N1MM was using the port for PAQP.

 

Any suggestions to locate the SDQP log would be appreciated.

 

73,

Dale, kg5u




Re: SDQP log missing

Lou Everett, Sr. <loueverettsr@...>
 

He did say he used ACL.  

On Mon, Oct 12, 2020 at 10:01 AM AI3KS <AI3KS.01@...> wrote:
Dale,

Assuming that you used the South Dakota QSO Party software, look here:

C:\Users\Username\Documents\Affirmatech\N3FJP Software\SD-QSO-Party-OutOfState

Hope this helps.

Steve, AI3KS
On 20/10/12 09:42, Dale Martin wrote:

This morning, I went to open the SDQP log I created in ACL yesterday. Nothing. No log anywhere.  It was my first time creating a contest log in ACL. Where does the contest log data go? The Loggiing seemed to log my QSOs in spite not being connected to a radio. N1MM was using the port for PAQP.

 

Any suggestions to locate the SDQP log would be appreciated.

 

73,

Dale, kg5u



Re: SDQP log missing

Lou Everett, Sr. <loueverettsr@...>
 

Did you bring up that particular log or did u just let it default to the regular log file?

Lou WA5LOU

On Mon, Oct 12, 2020 at 9:43 AM Dale Martin <kg5u@...> wrote:

This morning, I went to open the SDQP log I created in ACL yesterday. Nothing. No log anywhere.  It was my first time creating a contest log in ACL. Where does the contest log data go? The Loggiing seemed to log my QSOs in spite not being connected to a radio. N1MM was using the port for PAQP.

 

Any suggestions to locate the SDQP log would be appreciated.

 

73,

Dale, kg5u


Re: SDQP log missing

AI3KS
 

Dale,

Assuming that you used the South Dakota QSO Party software, look here:

C:\Users\Username\Documents\Affirmatech\N3FJP Software\SD-QSO-Party-OutOfState

Hope this helps.

Steve, AI3KS

On 20/10/12 09:42, Dale Martin wrote:

This morning, I went to open the SDQP log I created in ACL yesterday. Nothing. No log anywhere.  It was my first time creating a contest log in ACL. Where does the contest log data go? The Loggiing seemed to log my QSOs in spite not being connected to a radio. N1MM was using the port for PAQP.

 

Any suggestions to locate the SDQP log would be appreciated.

 

73,

Dale, kg5u



SDQP log missing

Dale Martin, KG5U
 

This morning, I went to open the SDQP log I created in ACL yesterday. Nothing. No log anywhere.  It was my first time creating a contest log in ACL. Where does the contest log data go? The Loggiing seemed to log my QSOs in spite not being connected to a radio. N1MM was using the port for PAQP.

 

Any suggestions to locate the SDQP log would be appreciated.

 

73,

Dale, kg5u


Re: 705

Scott Davis
 

Hi Larry,

Thanks for the good report!

Are you saying the 705 and the 7610 use the same 98 rig ID?  Did you change the default rig ID in your 705 to 98 from some other value?

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 12, 2020 8:39 am
Subject: [N3FJPSoftwareUsers] 705

I should have "proof read it better

Should have read 705 add changed to 98h.. and 705 creates..

SRY

Larry

On 10/12/2020 8:22 AM, Larry Stowell K1ZW wrote:
>
> Scott & Steve
>
> Very easy I changed the CI-V address to 98h same as my 7610. The 705
> greats to more com ports, so that's all I changed, com port.
>
> I was surprised that the 705 doesn't have a baud rate setting.
>
> Everything should be that easy
>
> 73 Larry K1ZW
>
>






705

Larry Stowell K1ZW
 

I should have "proof read it better

Should have read 705 add changed to 98h.. and 705 creates..

SRY

Larry

On 10/12/2020 8:22 AM, Larry Stowell K1ZW wrote:

Scott & Steve

Very easy I changed the CI-V address to 98h same as my 7610. The 705 greats to more com ports, so that's all I changed, com port.

I was surprised that the 705 doesn't have a baud rate setting.

Everything should be that easy

73 Larry K1ZW


Re: IC-705

Larry Stowell K1ZW
 

Scott & Steve

Very easy I changed the CI-V address to 98h same as my 7610. The 705 greats to more com ports, so that's all I changed, com port.

I was surprised that the 705 doesn't have a baud rate setting.

Everything should be that easy

73 Larry K1ZW


On 10/11/2020 11:51 AM, Scott Davis via groups.io wrote:

Thanks Steve, yes, that should do it.

Larry, please let us know how you make out.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 11:01 am
Subject: Re: [N3FJPSoftwareUsers] IC-705

Scott, Larry,

Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual.

Think I would try setting it up as a 7300, change the address and see what happens.

Steve, AI3KS

On 20/10/11 10:36, Scott Davis via groups.io wrote:
Hi Larry,

Thanks for your e-mail.  What is the rig ID and cat specifications for the 705 from your manual?

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 10:32 am
Subject: [N3FJPSoftwareUsers] IC-705

Has anybody interfaced an Icom IC-705 yet???
 I need help

73 Larry K1ZW


Re: Flex Radio

Dave Hamm, K4EET
 

Hi JoAnn,

The FlexRadio series is a great lineup! I have a FLEX-6500 and am very pleased with its superior performance. The main difference in digital operations from your Yaesu FT-1000MP is that you no longer need a modem like Tigertronics' SignaLink or West Mountain Radio's RIGblaster between your computer and your transceiver. The FlexRadio series connects directly to your computer. Read the article that Scott, KA2K, referenced in his post. Let us know if you have any questions.

73, Dave K4EET


Re: IC-705

Scott Davis
 

Hi Larry,

Thanks for the good report!  From the PAQP software, on the rig interface page, while the program is polling your 705, click Save Settings under the Rig List.

Start AC Log and click Load Settings and select the file you saved.

That will do the trick.

Please click the Copy to Clipboard button on the rig interface form and send along your 705 settings, so that I can add them to the web site.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 6:51 pm
Subject: Re: [N3FJPSoftwareUsers] IC-705

Scott & Steve
I got it working in the PAQSOP but not in N3FJP I'll look closer tomorrow.
and let you know( I really like the 705)'
73 Larry K1ZW
On 10/11/2020 11:51 AM, Scott Davis via groups.io wrote:
Thanks Steve, yes, that should do it.

Larry, please let us know how you make out.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 11:01 am
Subject: Re: [N3FJPSoftwareUsers] IC-705

Scott, Larry,

Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual.

Think I would try setting it up as a 7300, change the address and see what happens.

Steve, AI3KS

On 20/10/11 10:36, Scott Davis via groups.io wrote:
Hi Larry,

Thanks for your e-mail.  What is the rig ID and cat specifications for the 705 from your manual?

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 10:32 am
Subject: [N3FJPSoftwareUsers] IC-705

Has anybody interfaced an Icom IC-705 yet???
 I need help

73 Larry K1ZW


Re: IC-705

Larry Stowell K1ZW
 

Scott & Steve

I got it working in the PAQSOP but not in N3FJP I'll look closer tomorrow.

and let you know( I really like the 705)'

73 Larry K1ZW

On 10/11/2020 11:51 AM, Scott Davis via groups.io wrote:
Thanks Steve, yes, that should do it.

Larry, please let us know how you make out.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 11:01 am
Subject: Re: [N3FJPSoftwareUsers] IC-705

Scott, Larry,

Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual.

Think I would try setting it up as a 7300, change the address and see what happens.

Steve, AI3KS

On 20/10/11 10:36, Scott Davis via groups.io wrote:
Hi Larry,

Thanks for your e-mail.  What is the rig ID and cat specifications for the 705 from your manual?

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 10:32 am
Subject: [N3FJPSoftwareUsers] IC-705

Has anybody interfaced an Icom IC-705 yet???
 I need help

73 Larry K1ZW


Re: Winkeyer Issue #contest

Scott Davis
 

Hi Ron,

Thanks for your e-mail.  The CW keying code in all my software is identical.  Make sure you have the correct port selected here:

Capture.JPG

That will likely do the trick.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: k6jta@...
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 6:01 pm
Subject: [N3FJPSoftwareUsers] Winkeyer Issue #contest

Using info gained here on the reflector, I was able to set up my ICOM 7600 and Winkeyer for the California QSO Party.  Now I am setting up for the ARRL Nov Sweeps.  Have put all the same info in N3FJP software, did rig interface and Winkeryer set up.  In ARRL Nov Sweeps, when I hit an F Key it keys a sidetone, but will not key the transmitter.  What and I doing wrong?
Thank
Ron
K6JTA


Winkeyer Issue #contest

k6jta@...
 

Using info gained here on the reflector, I was able to set up my ICOM 7600 and Winkeyer for the California QSO Party.  Now I am setting up for the ARRL Nov Sweeps.  Have put all the same info in N3FJP software, did rig interface and Winkeryer set up.  In ARRL Nov Sweeps, when I hit an F Key it keys a sidetone, but will not key the transmitter.  What and I doing wrong?
Thank
Ron
K6JTA


Re: Flex Radio

Scott - KA2K
 

https://groups.io/g/FlexRadioSmartSDR


Re: Flex Radio

Lester Shields
 

It does not have any soundcard modems (psk, ft-8, etc,) built in. You still have to use a computer. 

Les


Obtaining frequency data from the contest loggers

Scott - KA2K
 

I use the PST Rotator Steppir utility to pull freq data from ACLog to control my Steppir antenna - works fine. I am not familiar with the internals of these applications and am not actually sure how the freq info exchange takes place but It seems that only ACLog makes frequency data available to PST Rotator and the contest loggers do not. Am I overlooking something or is this just the way it is?
Thanks


Flex Radio

JoAnn Donaldson
 

I am looking at buying a new Radio and so far all my research is pointing to the Flex. does it have FT8 built in or do I just interface it like I have done with my FT1000MP?

JoAnn - AB8YZ


Re: IC-705

Scott Davis
 

Thanks Steve, yes, that should do it.

Larry, please let us know how you make out.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AI3KS <AI3KS.01@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 11:01 am
Subject: Re: [N3FJPSoftwareUsers] IC-705

Scott, Larry,

Just took a quick look at the manual. It looks a lot like the 7300. The default ID is A4. The major difference I see is that there are two ports, one for CI-V (Port one) and one for rtty decode and DV data. This is on Page 8-14 of the basic manual.

Think I would try setting it up as a 7300, change the address and see what happens.

Steve, AI3KS

On 20/10/11 10:36, Scott Davis via groups.io wrote:
Hi Larry,

Thanks for your e-mail.  What is the rig ID and cat specifications for the 705 from your manual?

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Stowell K1ZW <wa2fif@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Oct 11, 2020 10:32 am
Subject: [N3FJPSoftwareUsers] IC-705

Has anybody interfaced an Icom IC-705 yet???
 I need help

73 Larry K1ZW


Re: Addding a feature

Jim Shorney
 

JoAnn, did you look at the W3DJS Python script? It is easy to set up and just plain works. To quote:

"wsjtx_to_n3fjp is a Python script which listens to the UDP output from WSJT-X to what would ordinarily go to the N1MM+ Logger broadcasts and parses and reformats that log data to the TCP input of N3FJP so that QSOs can be automatically logged for Linux users of digital amateur radio."

If you run Windows you will need to install a version of Python. If you have Linux you probably already have it.

https://github.com/dslotter/wsjtx_to_n3fjp/

I've been using it for several months without a single hiccup. It can log on the same computer, cross platform, or over a network.

73

-Jim
NU0C



On Sat, 10 Oct 2020 23:43:27 +0000 (UTC)
"JoAnn Donaldson via groups.io" <joannplano2005=yahoo.com@groups.io> wrote:

Scott,    I am NOT the programmer for this App, I am only reporting what it does. But it does send the logged contact via TCP/IP.  Is there not a way that ACLog could not read this transmission and use the data to log the contact?
JoAnn Donaldson - AB8YZ

3781 - 3800 of 47985