Date   

Re: ANAN 7000DLE SETTINGS

Mike Seguin
 

Set PowerSDR to emulate a TS-2000. That should work fine.

On 10/8/2020 7:18 AM, Doug WA2DX via groups.io wrote:
Hi, sorry I wasn't clear. I would like to use the N3FJP logging program with my Anan radio. However, that radio is not listed in the Rig Interface Settings. So I'm hopeful that someone may have successfully found a combination of settings that allow logging from the Anan.
--

73,
Mike, N1JEZ
"A closed mouth gathers no feet"


Re: ANAN 7000DLE SETTINGS

Doug WA2DX
 

Hi, sorry I wasn't clear. I would like to use the N3FJP logging program with my Anan radio. However, that radio is not listed in the Rig Interface Settings. So I'm hopeful that someone may have successfully found a combination of settings that allow logging from the Anan. 


Re: ANAN 7000DLE Settings

Scott Davis
 

Hi Doug,

Thanks for your e-mail.  Sorry, I am not familiar with the Apache radios.  If they don't use the protocols of an existing rig, they are not supported in my software.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Doug WA2DX via groups.io <dougmay6@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Oct 7, 2020 4:03 pm
Subject: [N3FJPSoftwareUsers] ANAN 7000DLE Settings

I would appreciate some help determining the settings for an Anan 7000DLE or any similar Apache SDR radio. Thanks.

Doug/WA2DX


ANAN 7000DLE Settings

Doug WA2DX
 

I would appreciate some help determining the settings for an Anan 7000DLE or any similar Apache SDR radio. Thanks.

Doug/WA2DX


Re: ANAN 7000DLE SETTINGS

AB8WD-Willie
 

Doug we need to know of what settings are you needing?


Re: Which contest database to use?

Scott Davis
 

Hi Bain,

Thanks for your e-mail.  To fill in data from your history file, click Settings > History file and enable the function.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bainbridge Cowell via groups.io <baincowell@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Wed, Oct 7, 2020 4:53 pm
Subject: [N3FJPSoftwareUsers] Which contest database to use?

In the N3FJP software, for example the CW Ops contest program, when I start a new weekly “mini-test” (CWT), I have a two choices:
 
  • Start a new contest with the current database file, or
  • Start a new contest with a new database file.
 
I have been using the second option, because when I try the first one I get a warning message that this will delete the previous log in that database file.
 
I would like to choose an option that might “fill in” contact details like name and CW Ops member number when I contact  a station I have worked in previous mini-tests.  Since the ops are running at 25-40 wpm, this would really help me not having to ask for repeats!
 
Any suggestion would be appreciated.
Bain, K8LBQ
 
Sent from Mail for Windows 10
 


Re: Which contest database to use?

Larry Banks
 

Hi Bain,
 
Have you turned on your history file?

73 -- Larry -- W1DYJ

 

Sent: Wednesday, October 07, 2020 16:53
Subject: [N3FJPSoftwareUsers] Which contest database to use?
 

In the N3FJP software, for example the CW Ops contest program, when I start a new weekly “mini-test” (CWT), I have a two choices:

 

  • Start a new contest with the current database file, or
  • Start a new contest with a new database file.

 

I have been using the second option, because when I try the first one I get a warning message that this will delete the previous log in that database file.

 

I would like to choose an option that might “fill in” contact details like name and CW Ops member number when I contact  a station I have worked in previous mini-tests.  Since the ops are running at 25-40 wpm, this would really help me not having to ask for repeats!

 

Any suggestion would be appreciated.

Bain, K8LBQ

 

Sent from Mail for Windows 10

 


ANAN 7000DLE SETTINGS

Doug WA2DX
 

Anyone know what the settings might be for the Anan 7000 or any Apache SDR?  Thanks.

Doug/WA2DX


Which contest database to use?

Bainbridge Cowell
 

In the N3FJP software, for example the CW Ops contest program, when I start a new weekly “mini-test” (CWT), I have a two choices:

 

  • Start a new contest with the current database file, or
  • Start a new contest with a new database file.

 

I have been using the second option, because when I try the first one I get a warning message that this will delete the previous log in that database file.

 

I would like to choose an option that might “fill in” contact details like name and CW Ops member number when I contact  a station I have worked in previous mini-tests.  Since the ops are running at 25-40 wpm, this would really help me not having to ask for repeats!

 

Any suggestion would be appreciated.

Bain, K8LBQ

 

Sent from Mail for Windows 10

 


Rig control using Parallels

James Artz
 

I’m having troubles getting rig control to work using Parallels and Windows 7. Does anyone have any ideas of what I should look for? Macbook Pro / Parallels / Windows 7 / KX3


Re: Uploading log--to Eqsl--

G. lynn moore
 

Problem found and resolved.

Eqsl not accepting password for their site.

Changed password. Works fine now.

Thanks for your time and patience.

Love AClog!!!!

73

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 8:37 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your follow up.  If your attempt to upload to eQSL using AC Log was successful, you will now find Es in the Sent Confirmed By field.  Those QSOs will no longer be sent to eQSL again.

 

Capture.JPG

 

If you are not seeing Es now, your attempt was unsuccessful for some reason.  If that's the case, correct your settings, make sure your Internet software is allowing AC Log to access the QRZ site and try again.

 

As your eQSL uploads are sent, your records will have the E added when you see a response that looks like this on AC Log's eQSL form:

 

Capture2.JPG

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: G. lynn moore <ka7ctt@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Oct 6, 2020 10:48 am
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 

 


Re: Uploading log--to Eqsl--

Scott Davis
 

Hi Lynn,

Thanks for your follow up.  If your attempt to upload to eQSL using AC Log was successful, you will now find Es in the Sent Confirmed By field.  Those QSOs will no longer be sent to eQSL again.

Capture.JPG

If you are not seeing Es now, your attempt was unsuccessful for some reason.  If that's the case, correct your settings, make sure your Internet software is allowing AC Log to access the QRZ site and try again.

As your eQSL uploads are sent, your records will have the E added when you see a response that looks like this on AC Log's eQSL form:

Capture2.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: G. lynn moore <ka7ctt@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Oct 6, 2020 10:48 am
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’
Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.
So??
‘Lynn’ KA7CTT
NNNN
 
 
Sent from Mail for Windows 10
 
From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--
 
Hi Lynn,
 
Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.
 
Enjoy!
73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--
Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN
 


Re: Uploading log--to Eqsl--

Lou Everett, Sr. <loueverettsr@...>
 

I know this.  I was just curious to see if he had tried downloading from eqsl.  I had a similar problem some years back and after I downloaded one time from eqsl all worked fine.
I agree with you there is something else going on here.  But, it's worth a try.

Lou WA5LOU


On Tue, Oct 6, 2020 at 10:53 AM AI3KS <AI3KS.01@...> wrote:
Lou,

You don't need to download from EQSL like LOTW.

From the EQSL dialog box in ACLog:

"When you upload records to eQSL, an 'E' will be added to the Sent Confirmed By field of each record so that it is not duplicated on future uploads.  Similarly, an 'E' will be added to the Received Confirmed By field for records downloaded from eQSL."

Something else is happening here.

Steve, AI3KS

On 20/10/06 10:49, Lou Everett, Sr. wrote:
Have you downloaded from EQSL?

Lou WA5LOU

On Tue, Oct 6, 2020 at 10:48 AM G. lynn moore <ka7ctt@...> wrote:

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 



Re: Uploading log--to Eqsl--

AI3KS
 

Lou,

You don't need to download from EQSL like LOTW.

From the EQSL dialog box in ACLog:

"When you upload records to eQSL, an 'E' will be added to the Sent Confirmed By field of each record so that it is not duplicated on future uploads.  Similarly, an 'E' will be added to the Received Confirmed By field for records downloaded from eQSL."

Something else is happening here.

Steve, AI3KS

On 20/10/06 10:49, Lou Everett, Sr. wrote:
Have you downloaded from EQSL?

Lou WA5LOU

On Tue, Oct 6, 2020 at 10:48 AM G. lynn moore <ka7ctt@...> wrote:

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 



Re: Uploading log--to Eqsl--

Lou Everett, Sr. <loueverettsr@...>
 

Have you downloaded from EQSL?

Lou WA5LOU


On Tue, Oct 6, 2020 at 10:48 AM G. lynn moore <ka7ctt@...> wrote:

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 


Re: Uploading log--to Eqsl--

G. lynn moore
 

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 


Re: Uploading log--to Eqsl--

Scott Davis
 

Hi Lynn,

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN


Re: more 4k monitor woes

Scott Davis
 

Thanks for the good information Chris!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chris Prosser via groups.io <chris@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 12:02 am
Subject: Re: [N3FJPSoftwareUsers] more 4k monitor woes

The menu offset and shrinkage still occurs at 100%. The monitor is landscape. But then the Awards dialog doesn’t have the correct layout, elements overlap and it’s unusable. 

my setup is a multi monitor stress test (somewhat intentionally). The left monitor is secondary and offset, like  |—.  So that means it’s coordinate space is negative and it’s origin is completely negative. The two monitors also have different scales, 150% on the left and 200% on the center. 

thanks for the quick response,
chris


Uploading log--to Eqsl--

G. lynn moore
 

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN


Re: more 4k monitor woes

Chris Prosser
 

The menu offset and shrinkage still occurs at 100%. The monitor is landscape. But then the Awards dialog doesn’t have the correct layout, elements overlap and it’s unusable. 


my setup is a multi monitor stress test (somewhat intentionally). The left monitor is secondary and offset, like  |—.  So that means it’s coordinate space is negative and it’s origin is completely negative. The two monitors also have different scales, 150% on the left and 200% on the center. 


thanks for the quick response,
chris

4241 - 4260 of 48367