Date   

Re: Uploading log--to Eqsl--

G. lynn moore
 

Problem found and resolved.

Eqsl not accepting password for their site.

Changed password. Works fine now.

Thanks for your time and patience.

Love AClog!!!!

73

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 8:37 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your follow up.  If your attempt to upload to eQSL using AC Log was successful, you will now find Es in the Sent Confirmed By field.  Those QSOs will no longer be sent to eQSL again.

 

Capture.JPG

 

If you are not seeing Es now, your attempt was unsuccessful for some reason.  If that's the case, correct your settings, make sure your Internet software is allowing AC Log to access the QRZ site and try again.

 

As your eQSL uploads are sent, your records will have the E added when you see a response that looks like this on AC Log's eQSL form:

 

Capture2.JPG

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: G. lynn moore <ka7ctt@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Oct 6, 2020 10:48 am
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 

 


Re: Uploading log--to Eqsl--

Scott Davis
 

Hi Lynn,

Thanks for your follow up.  If your attempt to upload to eQSL using AC Log was successful, you will now find Es in the Sent Confirmed By field.  Those QSOs will no longer be sent to eQSL again.

Capture.JPG

If you are not seeing Es now, your attempt was unsuccessful for some reason.  If that's the case, correct your settings, make sure your Internet software is allowing AC Log to access the QRZ site and try again.

As your eQSL uploads are sent, your records will have the E added when you see a response that looks like this on AC Log's eQSL form:

Capture2.JPG

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: G. lynn moore <ka7ctt@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Oct 6, 2020 10:48 am
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’
Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.
So??
‘Lynn’ KA7CTT
NNNN
 
 
Sent from Mail for Windows 10
 
From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--
 
Hi Lynn,
 
Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.
 
Enjoy!
73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--
Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN
 


Re: Uploading log--to Eqsl--

Lou Everett, Sr. <loueverettsr@...>
 

I know this.  I was just curious to see if he had tried downloading from eqsl.  I had a similar problem some years back and after I downloaded one time from eqsl all worked fine.
I agree with you there is something else going on here.  But, it's worth a try.

Lou WA5LOU


On Tue, Oct 6, 2020 at 10:53 AM AI3KS <AI3KS.01@...> wrote:
Lou,

You don't need to download from EQSL like LOTW.

From the EQSL dialog box in ACLog:

"When you upload records to eQSL, an 'E' will be added to the Sent Confirmed By field of each record so that it is not duplicated on future uploads.  Similarly, an 'E' will be added to the Received Confirmed By field for records downloaded from eQSL."

Something else is happening here.

Steve, AI3KS

On 20/10/06 10:49, Lou Everett, Sr. wrote:
Have you downloaded from EQSL?

Lou WA5LOU

On Tue, Oct 6, 2020 at 10:48 AM G. lynn moore <ka7ctt@...> wrote:

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 



Re: Uploading log--to Eqsl--

AI3KS
 

Lou,

You don't need to download from EQSL like LOTW.

From the EQSL dialog box in ACLog:

"When you upload records to eQSL, an 'E' will be added to the Sent Confirmed By field of each record so that it is not duplicated on future uploads.  Similarly, an 'E' will be added to the Received Confirmed By field for records downloaded from eQSL."

Something else is happening here.

Steve, AI3KS

On 20/10/06 10:49, Lou Everett, Sr. wrote:
Have you downloaded from EQSL?

Lou WA5LOU

On Tue, Oct 6, 2020 at 10:48 AM G. lynn moore <ka7ctt@...> wrote:

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 



Re: Uploading log--to Eqsl--

Lou Everett, Sr. <loueverettsr@...>
 

Have you downloaded from EQSL?

Lou WA5LOU


On Tue, Oct 6, 2020 at 10:48 AM G. lynn moore <ka7ctt@...> wrote:

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 


Re: Uploading log--to Eqsl--

G. lynn moore
 

There is no ‘E’ in the ‘sent confirmed by field’.. Only ‘L’s’

Just now attempted to send ‘contacts not uploaded’, to Eqsl and again.. sends the entire log.

So??

‘Lynn’ KA7CTT

NNNN

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via groups.io
Sent: Tuesday, October 6, 2020 3:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

 

Hi Lynn,

 

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN

 


Re: Uploading log--to Eqsl--

Scott Davis
 

Hi Lynn,

Thanks for your e-mail.  Once your QSO is successfully uploaded to eQSL from within AC Log, there will be an E in the sent confirmed by field.  AC Log won't attempt to send those contacts again with the All Contacts Not Uploaded command.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: ka7ctt@...
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 2:21 am
Subject: [N3FJPSoftwareUsers] Uploading log--to Eqsl--

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN


Re: more 4k monitor woes

Scott Davis
 

Thanks for the good information Chris!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chris Prosser via groups.io <chris@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Tue, Oct 6, 2020 12:02 am
Subject: Re: [N3FJPSoftwareUsers] more 4k monitor woes

The menu offset and shrinkage still occurs at 100%. The monitor is landscape. But then the Awards dialog doesn’t have the correct layout, elements overlap and it’s unusable. 

my setup is a multi monitor stress test (somewhat intentionally). The left monitor is secondary and offset, like  |—.  So that means it’s coordinate space is negative and it’s origin is completely negative. The two monitors also have different scales, 150% on the left and 200% on the center. 

thanks for the quick response,
chris


Uploading log--to Eqsl--

G. lynn moore
 

Uploading contacts to LoTW works fine. Uploading to Eqsl-- Click on All Contacts not uploaded-- sends the entire log.
Is there a setting I have missed?
Happened with the previous version also. 
Thanks..
'Lynn' KA7CTT
NNNN


Re: more 4k monitor woes

Chris Prosser
 

The menu offset and shrinkage still occurs at 100%. The monitor is landscape. But then the Awards dialog doesn’t have the correct layout, elements overlap and it’s unusable. 


my setup is a multi monitor stress test (somewhat intentionally). The left monitor is secondary and offset, like  |—.  So that means it’s coordinate space is negative and it’s origin is completely negative. The two monitors also have different scales, 150% on the left and 200% on the center. 


thanks for the quick response,
chris


Re: CAQP Counties

Scott Davis
 

Hi Mel,

Thanks for your follow up.  It doesn't matter whether you type the full county name or the abbreviation.  The program will accept the entry either way.

Both abbreviations you sent along work fine:

Capture.JPG

Capture2.JPG

Capture3.JPG

All is well.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 7:08 pm
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties

Scott

Ok the box is unchecked , so when I put in SBEN , also tried SLUI for San Luis Obispo, and the didnot work either. what I think I am hearing is that it should fill the box with San Bernadeno. That does not happen. Am I missing a concept here.

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 4:12 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your follow up.  That check box only controls whether you want the software to auto fill by name or abbreviation.  The software will accept the full name or abbreviation either way.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 5:08 pm
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties


When I check that box it will take the abbreviation but does not autofill the whole county name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "AI3KS" <AI3KS.01@...>
Date: Mon, October 05, 2020 10:05 am
To: N3FJPSoftwareUsers@groups.io

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 

Scott

Ok the box is unchecked , so when I put in SBEN , also tried SLUI for San Luis Obispo, and the didnot work either. what I think I am hearing is that it should fill the box with San Bernadeno. That does not happen. Am I missing a concept here.

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 4:12 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your follow up.  That check box only controls whether you want the software to auto fill by name or abbreviation.  The software will accept the full name or abbreviation either way.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 5:08 pm
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties


When I check that box it will take the abbreviation but does not autofill the whole county name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "AI3KS" <AI3KS.01@...>
Date: Mon, October 05, 2020 10:05 am
To: N3FJPSoftwareUsers@groups.io

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Scott Davis
 

Hi Mel,

Thanks for your follow up.  That check box only controls whether you want the software to auto fill by name or abbreviation.  The software will accept the full name or abbreviation either way.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 5:08 pm
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties


When I check that box it will take the abbreviation but does not autofill the whole county name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "AI3KS" <AI3KS.01@...>
Date: Mon, October 05, 2020 10:05 am
To: N3FJPSoftwareUsers@groups.io

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 


When I check that box it will take the abbreviation but does not autofill the whole county name

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "AI3KS" <AI3KS.01@...>
Date: Mon, October 05, 2020 10:05 am
To: N3FJPSoftwareUsers@groups.io

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 

Scott

I did not know there was a checkbox to do autofill for the counties.  I am going to check it out.

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 3:33 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your follow up.  Please provide a specific example of an abbreviation that the software would not accept.

Thanks in advance.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 10:52 am
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties

Scott

NOt a big deal. when i entered the 4  character abbreviation it did not take. I had to put in the whole string.

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 5:42 am
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  It worked fine here, I can't duplicate what you describe and there were no changes from previous years.  Please provide a specific example of an abbreviation you are unable to enter.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Oct 4, 2020 8:52 pm
Subject: [N3FJPSoftwareUsers] CAQP Counties

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Scott Davis
 

Hi Mel,

Thanks for your follow up.  Please provide a specific example of an abbreviation that the software would not accept.

Thanks in advance.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 10:52 am
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties

Scott

NOt a big deal. when i entered the 4  character abbreviation it did not take. I had to put in the whole string.

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 5:42 am
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  It worked fine here, I can't duplicate what you describe and there were no changes from previous years.  Please provide a specific example of an abbreviation you are unable to enter.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Oct 4, 2020 8:52 pm
Subject: [N3FJPSoftwareUsers] CAQP Counties

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: more 4k monitor woes

Jay
 

Chris, 
I too see the same issues with my 4K monitors; the awards dialog box, the LOTW upload screen, and the VHF contest software all look similar to your pic of the awards dialog box.
The only way to fix it was to blow it up almost to the full size of the monitor, which takes up entirely too much room - My plan to move to 4K was to see more things on the monitor at once, not less - so I am still dealing with how to position the logging software and still see everything else. All of my monitors run the same resolution and settings. AClogs visual elements don't scale well on 4K.

- Jay N1AV


On Mon, Oct 5, 2020 at 6:54 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Chris,

I would be curious if the problem persists at 100% in landscape mode?

I am at a loss on the top level menus being one size and the sub level menus being another.  

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chris Prosser via groups.io <chris=nart.org@groups.io>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 5, 2020 12:16 am
Subject: [N3FJPSoftwareUsers] more 4k monitor woes

Hi Folks,

I've been digging through the multimonitor and 4K threads and it's not clear to my if my situation is supported. I just started trying the program today and I like what I can get to so far.

My setup: left monitor, portrait mode 1440 x 2560. Scale at 150%. Don't plan on using AC Log on it.
Center monitor, landscape mode, 3840 x 2160. Scale at 200%.

Running with my monitor scale at 100% isn't an option due to other software I use the requires the scale increase to be operable.

Problem #1: Menu's show up unscaled and offset (possibly just the unscaled localtion) with the shadow showing up offset by the origin of the window (I think). Here's me clicking on the Awards menu.



The awards form has font scaling issues, making it unusable. Unfortunately if I change form scaling to 50%, then the main window is too small.



I can find a compromise if the form size is 80%. The Awards dialog is huge, filling up the 4k display, but workable.

But the menus are still very difficult to use.

I am a desktop application programmer by trade, and about a decade ago I had to spend a lot of time adapting our software to work correctly in all these use cases. My colleague ended up creating a new view framework and we had to port our code to it. It was not fun. I have another program from a different programmer that is having similar menu item issues and I wonder if you all are using the same framework under the hood.

Practically, if I set the form size to 80% I can get everything usable from a font size and dialog layout perspective, but the menus are still broken.

Is that something you are tracking?

I apologize in advance for slow replies during the work week. I will not have time to poke at this again until the weekend.

thanks,
chris


Re: CAQP Counties

W4SSF
 

Ya I did the same thing but I just ended up clicking on the county and worked the qso. I figured that I could change things after the contest was over knowing I wouldn't have that many entries. I called a friend and told him of the problem after my first qso and he said don't worry about it, that it would convert to the right format when I made my cabrillo file. What a relief lol. 


On Mon, Oct 5, 2020 at 10:57 AM Mel Marcus <melm@...> wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

AI3KS
 

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 

Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A

4261 - 4280 of 48377