Date   

Re: CAQP Counties

Scott Davis
 

Hi Mel,

Thanks for your follow up.  That check box only controls whether you want the software to auto fill by name or abbreviation.  The software will accept the full name or abbreviation either way.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 5:08 pm
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties


When I check that box it will take the abbreviation but does not autofill the whole county name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "AI3KS" <AI3KS.01@...>
Date: Mon, October 05, 2020 10:05 am
To: N3FJPSoftwareUsers@groups.io

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 


When I check that box it will take the abbreviation but does not autofill the whole county name

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "AI3KS" <AI3KS.01@...>
Date: Mon, October 05, 2020 10:05 am
To: N3FJPSoftwareUsers@groups.io

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 

Scott

I did not know there was a checkbox to do autofill for the counties.  I am going to check it out.

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 3:33 pm
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your follow up.  Please provide a specific example of an abbreviation that the software would not accept.

Thanks in advance.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 10:52 am
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties

Scott

NOt a big deal. when i entered the 4  character abbreviation it did not take. I had to put in the whole string.

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 5:42 am
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  It worked fine here, I can't duplicate what you describe and there were no changes from previous years.  Please provide a specific example of an abbreviation you are unable to enter.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Oct 4, 2020 8:52 pm
Subject: [N3FJPSoftwareUsers] CAQP Counties

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Scott Davis
 

Hi Mel,

Thanks for your follow up.  Please provide a specific example of an abbreviation that the software would not accept.

Thanks in advance.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Oct 5, 2020 10:52 am
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties

Scott

NOt a big deal. when i entered the 4  character abbreviation it did not take. I had to put in the whole string.

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 5:42 am
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  It worked fine here, I can't duplicate what you describe and there were no changes from previous years.  Please provide a specific example of an abbreviation you are unable to enter.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Oct 4, 2020 8:52 pm
Subject: [N3FJPSoftwareUsers] CAQP Counties

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: more 4k monitor woes

Jay
 

Chris, 
I too see the same issues with my 4K monitors; the awards dialog box, the LOTW upload screen, and the VHF contest software all look similar to your pic of the awards dialog box.
The only way to fix it was to blow it up almost to the full size of the monitor, which takes up entirely too much room - My plan to move to 4K was to see more things on the monitor at once, not less - so I am still dealing with how to position the logging software and still see everything else. All of my monitors run the same resolution and settings. AClogs visual elements don't scale well on 4K.

- Jay N1AV


On Mon, Oct 5, 2020 at 6:54 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Chris,

I would be curious if the problem persists at 100% in landscape mode?

I am at a loss on the top level menus being one size and the sub level menus being another.  

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chris Prosser via groups.io <chris=nart.org@groups.io>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 5, 2020 12:16 am
Subject: [N3FJPSoftwareUsers] more 4k monitor woes

Hi Folks,

I've been digging through the multimonitor and 4K threads and it's not clear to my if my situation is supported. I just started trying the program today and I like what I can get to so far.

My setup: left monitor, portrait mode 1440 x 2560. Scale at 150%. Don't plan on using AC Log on it.
Center monitor, landscape mode, 3840 x 2160. Scale at 200%.

Running with my monitor scale at 100% isn't an option due to other software I use the requires the scale increase to be operable.

Problem #1: Menu's show up unscaled and offset (possibly just the unscaled localtion) with the shadow showing up offset by the origin of the window (I think). Here's me clicking on the Awards menu.



The awards form has font scaling issues, making it unusable. Unfortunately if I change form scaling to 50%, then the main window is too small.



I can find a compromise if the form size is 80%. The Awards dialog is huge, filling up the 4k display, but workable.

But the menus are still very difficult to use.

I am a desktop application programmer by trade, and about a decade ago I had to spend a lot of time adapting our software to work correctly in all these use cases. My colleague ended up creating a new view framework and we had to port our code to it. It was not fun. I have another program from a different programmer that is having similar menu item issues and I wonder if you all are using the same framework under the hood.

Practically, if I set the form size to 80% I can get everything usable from a font size and dialog layout perspective, but the menus are still broken.

Is that something you are tracking?

I apologize in advance for slow replies during the work week. I will not have time to poke at this again until the weekend.

thanks,
chris


Re: CAQP Counties

W4SSF
 

Ya I did the same thing but I just ended up clicking on the county and worked the qso. I figured that I could change things after the contest was over knowing I wouldn't have that many entries. I called a friend and told him of the problem after my first qso and he said don't worry about it, that it would convert to the right format when I made my cabrillo file. What a relief lol. 


On Mon, Oct 5, 2020 at 10:57 AM Mel Marcus <melm@...> wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

AI3KS
 

Mel,

Under settings, do you have "Use Abbreviations to Autofill County" checked?

Steve, AI3KS

On 20/10/05 10:56, Mel Marcus wrote:
Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 

Stan

It did that. but I thought when we were logging the call, all i had to do was enter the abbreviation and it would change it to the full name

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "W4SSF" <1stanswanson@...>
Date: Mon, October 05, 2020 8:45 am
To: N3FJPSoftwareUsers@groups.io

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

Mel Marcus
 

Scott

NOt a big deal. when i entered the 4  character abbreviation it did not take. I had to put in the whole string.

Mel

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Mon, October 05, 2020 5:42 am
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Mel,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  It worked fine here, I can't duplicate what you describe and there were no changes from previous years.  Please provide a specific example of an abbreviation you are unable to enter.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Oct 4, 2020 8:52 pm
Subject: [N3FJPSoftwareUsers] CAQP Counties

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Re: CAQP Counties

K8TS
 

I had some minor problems with counties also.  I have them written down.   I will try to recreate them today.  It also had to do with the county code.

Dale K8TS

 

Sent from Mail for Windows 10

 

From: W4SSF
Sent: Monday, October 5, 2020 9:47 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] CAQP Counties

 

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 

 

On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

 

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

 

Mel

NE9A

 


Re: Any way to change the columns included in the Net Manager

Scott Davis
 

Hi Casper,

Thanks for your e-mail.  Sorry, the Net Manager form isn't currently user customizable.

I'm sorry that I didn't have the answer that you were looking for but thanks for the suggestion!

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Casper Fagerberg <ko4dqi@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 5, 2020 9:52 am
Subject: [N3FJPSoftwareUsers] Any way to change the columns included in the Net Manager

Hi Scott,

I got the AClog mainly to help me with running my nets during the week.  For the most part it does an excellent job , but i am wondering if there is a way to configure the columns used in the Net/roundtable manager?

Our club tracks City for demographic purposes as our repeater reached across 2 different states. I managed to get the City field included in the main component of AClog but i do not see any way to edit the setup for the Net Manager?

Am I missing something or is it just not possible ?

Regards,

Casper , KO4DQI


Any way to change the columns included in the Net Manager

Casper Fagerberg <ko4dqi@...>
 

Hi Scott,

I got the AClog mainly to help me with running my nets during the week.  For the most part it does an excellent job , but i am wondering if there is a way to configure the columns used in the Net/roundtable manager?

Our club tracks City for demographic purposes as our repeater reached across 2 different states. I managed to get the City field included in the main component of AClog but i do not see any way to edit the setup for the Net Manager?

Am I missing something or is it just not possible ?

Regards,

Casper , KO4DQI


Re: more 4k monitor woes

Scott Davis
 

Hi Chris,

I would be curious if the problem persists at 100% in landscape mode?

I am at a loss on the top level menus being one size and the sub level menus being another.  

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chris Prosser via groups.io <chris@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 5, 2020 12:16 am
Subject: [N3FJPSoftwareUsers] more 4k monitor woes

Hi Folks,

I've been digging through the multimonitor and 4K threads and it's not clear to my if my situation is supported. I just started trying the program today and I like what I can get to so far.

My setup: left monitor, portrait mode 1440 x 2560. Scale at 150%. Don't plan on using AC Log on it.
Center monitor, landscape mode, 3840 x 2160. Scale at 200%.

Running with my monitor scale at 100% isn't an option due to other software I use the requires the scale increase to be operable.

Problem #1: Menu's show up unscaled and offset (possibly just the unscaled localtion) with the shadow showing up offset by the origin of the window (I think). Here's me clicking on the Awards menu.



The awards form has font scaling issues, making it unusable. Unfortunately if I change form scaling to 50%, then the main window is too small.



I can find a compromise if the form size is 80%. The Awards dialog is huge, filling up the 4k display, but workable.

But the menus are still very difficult to use.

I am a desktop application programmer by trade, and about a decade ago I had to spend a lot of time adapting our software to work correctly in all these use cases. My colleague ended up creating a new view framework and we had to port our code to it. It was not fun. I have another program from a different programmer that is having similar menu item issues and I wonder if you all are using the same framework under the hood.

Practically, if I set the form size to 80% I can get everything usable from a font size and dialog layout perspective, but the menus are still broken.

Is that something you are tracking?

I apologize in advance for slow replies during the work week. I will not have time to poke at this again until the weekend.

thanks,
chris


Re: more 4k monitor woes

Scott Davis
 

Thanks for the report Wilbur.  Are you also using two different monitors, each with different dimensions?  


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: AB8WD via groups.io <AB8WD@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 5, 2020 6:58 am
Subject: Re: [N3FJPSoftwareUsers] more 4k monitor woes

I have the same issue for months quit using aclog went to hrd when it could not be fixed following.


Re: CAQP Counties

W4SSF
 

It should convert the full name counties to the right 4 digit abbreviations when you make your cabrillo file. 


On Sun, Oct 4, 2020 at 8:52 PM Mel Marcus <melm@...> wrote:
I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


Parallels use

James Artz
 

I’m trying to set up rig control in parallels. I had to upgrade my hard drive, I used boot camp on the old hard drive, and was able to set up rig control. On my new drive, I’m using Parallels, and can’t get rig control to work in this software or JS8CALL either. I’m stumped. Anyone know if these products can work in a virtual environment?


Re: more 4k monitor woes

AB8WD-Willie
 

I have the same issue for months quit using aclog went to hrd when it could not be fixed following.


Re: more 4k monitor woes

Scott Davis
 

Hi Chris,

Thanks for your e-mail.  I'm sorry that you have run into trouble.  I did work on the software back in 2019 to display properly on a 4K monitors and I thought I had most of the bugs worked out.  While I did have a second monitor connected, it was 1920 by 1080 and not the primary monitor.  I really didn't focus on two monitor configurations.  Yours is the first problem report since I updated the code, so I think most typical setups are okay.

Unfortunately, following my testing, my 4K monitor was repurposed and I no longer have access to it for testing, but I will keep your comments in mind for the future.

Thanks for your interest in my software!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Chris Prosser via groups.io <chris@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 5, 2020 12:16 am
Subject: [N3FJPSoftwareUsers] more 4k monitor woes

Hi Folks,

I've been digging through the multimonitor and 4K threads and it's not clear to my if my situation is supported. I just started trying the program today and I like what I can get to so far.

My setup: left monitor, portrait mode 1440 x 2560. Scale at 150%. Don't plan on using AC Log on it.
Center monitor, landscape mode, 3840 x 2160. Scale at 200%.

Running with my monitor scale at 100% isn't an option due to other software I use the requires the scale increase to be operable.

Problem #1: Menu's show up unscaled and offset (possibly just the unscaled localtion) with the shadow showing up offset by the origin of the window (I think). Here's me clicking on the Awards menu.



The awards form has font scaling issues, making it unusable. Unfortunately if I change form scaling to 50%, then the main window is too small.



I can find a compromise if the form size is 80%. The Awards dialog is huge, filling up the 4k display, but workable.

But the menus are still very difficult to use.

I am a desktop application programmer by trade, and about a decade ago I had to spend a lot of time adapting our software to work correctly in all these use cases. My colleague ended up creating a new view framework and we had to port our code to it. It was not fun. I have another program from a different programmer that is having similar menu item issues and I wonder if you all are using the same framework under the hood.

Practically, if I set the form size to 80% I can get everything usable from a font size and dialog layout perspective, but the menus are still broken.

Is that something you are tracking?

I apologize in advance for slow replies during the work week. I will not have time to poke at this again until the weekend.

thanks,
chris


Re: CAQP Counties

Scott Davis
 

Hi Mel,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  It worked fine here, I can't duplicate what you describe and there were no changes from previous years.  Please provide a specific example of an abbreviation you are unable to enter.

Thanks!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Oct 4, 2020 8:52 pm
Subject: [N3FJPSoftwareUsers] CAQP Counties

I had a minor problem with the CAQP out of state. It is not stop me from working the contest.

the county field would not take the abbreviation so i had to enter the full name of the county. did i do something foolish.

Mel
NE9A


more 4k monitor woes

Chris Prosser
 

Hi Folks,

I've been digging through the multimonitor and 4K threads and it's not clear to my if my situation is supported. I just started trying the program today and I like what I can get to so far.

My setup: left monitor, portrait mode 1440 x 2560. Scale at 150%. Don't plan on using AC Log on it.
Center monitor, landscape mode, 3840 x 2160. Scale at 200%.

Running with my monitor scale at 100% isn't an option due to other software I use the requires the scale increase to be operable.

Problem #1: Menu's show up unscaled and offset (possibly just the unscaled localtion) with the shadow showing up offset by the origin of the window (I think). Here's me clicking on the Awards menu.



The awards form has font scaling issues, making it unusable. Unfortunately if I change form scaling to 50%, then the main window is too small.



I can find a compromise if the form size is 80%. The Awards dialog is huge, filling up the 4k display, but workable.

But the menus are still very difficult to use.

I am a desktop application programmer by trade, and about a decade ago I had to spend a lot of time adapting our software to work correctly in all these use cases. My colleague ended up creating a new view framework and we had to port our code to it. It was not fun. I have another program from a different programmer that is having similar menu item issues and I wonder if you all are using the same framework under the hood.

Practically, if I set the form size to 80% I can get everything usable from a font size and dialog layout perspective, but the menus are still broken.

Is that something you are tracking?

I apologize in advance for slow replies during the work week. I will not have time to poke at this again until the weekend.

thanks,
chris

3761 - 3780 of 47865