Date   

Re: Passwords

Joseph Miller
 

Depending on which service you use for e-mail, some will let you create and name folders for saving your e-mails. I have been doing it that way for years and it's quick as I have a single place to look.

My other thought is to print Scott's email and keep it in a handy place.

Best wishes es 73

Joe KJ8O



On Sun, Sep 6, 2020, 7:09 AM Joe K7JOE via groups.io <k7joe=yahoo.com@groups.io> wrote:
does anyone  have a best practice for the passwords 
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?   

Joe 


Re: Passwords

Mel Marcus
 

I used to have the same problem. I have a folder in my email for N3FJP so what i did was make a subfolder that I call KEYS. I put Scott and Kims email with the keys/passwords in that subfolder. also in that folder are direct correspondence I might have with Scott and Kim

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] Passwords
From: "Scott Davis via groups.io" <SNKDavis@...>
Date: Sun, September 06, 2020 9:50 am
To: "N3FJPSoftwareUsers@groups.io" <N3FJPSoftwareUsers@groups.io>

Hi Joe,

Thanks for your e-mail.  You only need to enter the passwords once.  The only time you should have to reference the password list after that is when to move to a new PC, so keep them around for that eventuality, but otherwise, you should not regularly need to refer to the list.

If you ever do lose your password list, you can e-mail us direct and Kimberly will send you another list.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Sep 6, 2020 10:32 am
Subject: Re: [N3FJPSoftwareUsers] Passwords

A long time ago I printed my N3FJP password list out and placed it in a folder in my file cabinet. I also took a picture of that page with my iPhone and saved that to a secure folder in the phone and on my station computer - and backed it up to a thumb drive. 

Sent from Geoff’s iPhone X

On Sep 6, 2020, at 07:09, Joe K7JOE via groups.io <k7joe@...> wrote:

does anyone  have a best practice for the passwords 
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?   

Joe 


Re: Passwords

Scott Davis
 

Hi Joe,

Thanks for your e-mail.  You only need to enter the passwords once.  The only time you should have to reference the password list after that is when to move to a new PC, so keep them around for that eventuality, but otherwise, you should not regularly need to refer to the list.

If you ever do lose your password list, you can e-mail us direct and Kimberly will send you another list.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Sep 6, 2020 10:32 am
Subject: Re: [N3FJPSoftwareUsers] Passwords

A long time ago I printed my N3FJP password list out and placed it in a folder in my file cabinet. I also took a picture of that page with my iPhone and saved that to a secure folder in the phone and on my station computer - and backed it up to a thumb drive. 

Sent from Geoff’s iPhone X

On Sep 6, 2020, at 07:09, Joe K7JOE via groups.io <k7joe@...> wrote:

does anyone  have a best practice for the passwords 
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?   

Joe 


Re: Passwords

Jr - VE9ZZ
 

Joe your passwords are supposed to be stored in the folders that were installed for each contest. Look in your Documents folder there should be a folder named Affirmatech, then inside the N3FJP folder should be folders of each contest. I believe the password for each one should be where they belong. if they are not stored there then your program missed something.
VE9ZZ Jr

--
----- CW Forever -----
Fidel Jr - VE9ZZ
SKCC #17223
NAQCC #8776
CC #109


Re: Passwords

K7GA
 

A long time ago I printed my N3FJP password list out and placed it in a folder in my file cabinet. I also took a picture of that page with my iPhone and saved that to a secure folder in the phone and on my station computer - and backed it up to a thumb drive. 

Sent from Geoff’s iPhone X

On Sep 6, 2020, at 07:09, Joe K7JOE via groups.io <k7joe@...> wrote:

does anyone  have a best practice for the passwords 
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?   

Joe 


Re: Passwords

Larry Banks
 

Hi Joe,
 
I never have this issue.  There is something amiss with your setup.  I wish I had an answer for you.  Are you using the latest version of each contest?

73 -- Larry -- W1DYJ

 

Sent: Sunday, September 06, 2020 9:13
Subject: [N3FJPSoftwareUsers] Passwords
 
does anyone  have a best practice for the passwords
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?  

Joe 


Re: Passwords

kc6mie
 

I just printed them out so it’s available

Stephen Spencer

On Sep 6, 2020, at 7:09 AM, Joe K7JOE via groups.io <k7joe@...> wrote:

does anyone  have a best practice for the passwords 
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?   

Joe 


Passwords

Joe K7JOE
 

does anyone  have a best practice for the passwords 
Every time I load a contest I have to hunt for the email with passwords.   No way to go to a universal password is there ?   

Joe 


Re: Maybe wrong place for ?

n0dpr@comcast.netLEhU9NJpW <n0dpr@...>
 

David,
This is the best response I ever received from a question I asked on any group I subscribe to.
Brad

Sent from Xfinity Connect App



------ Original Message ------

From: Dave via groups.io
To: n3fjp
Sent: September 5, 2020 at 5:57 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

YES, I am a 1, 2, 3 kind of person. Very helpful seeing an explanation this way.

Dave KC3AM

On 09/05/2020 13:30, JoAnn Donaldson via groups.io wrote:
To get WSJT-X and JTAlert to interface with the N3FJP log

1. Fire up ACLog
2. Fire up WSIT-X
3. Fire up JTAlert
4. In JTAlert select Settings
5. Select Manage Settings
6. Select Logging
7. Select ACLog
8. Check Enable ACLogging
9. Check the two boxs below enable
10. Select Auto or manual
11. fill out the boxes for the selection
12. Select Log Type at bottom of screen.

When you click on a station in WSJT-X, it will send data to JTAlert.
JTAlert will then send data to the N3FJP Log

In operation when you get the popup after the RR73 is sent. When you click log it will log to the
internal log and send the Log entry to N3FJP  log and it will log the contact.

Hope I did not miss a step or if unclear then read the published text files or post another question here

JoAnn Donaldson - AB8YZ

On Saturday, September 5, 2020, 12:17:11 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:


This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>




--
Hams should be seen as well as heard, 73, Dave KC3AM


Re: Maybe wrong place for ?

Dave
 

YES, I am a 1, 2, 3 kind of person. Very helpful seeing an explanation this way.

Dave KC3AM

On 09/05/2020 13:30, JoAnn Donaldson via groups.io wrote:
To get WSJT-X and JTAlert to interface with the N3FJP log

1. Fire up ACLog
2. Fire up WSIT-X
3. Fire up JTAlert
4. In JTAlert select Settings
5. Select Manage Settings
6. Select Logging
7. Select ACLog
8. Check Enable ACLogging
9. Check the two boxs below enable
10. Select Auto or manual
11. fill out the boxes for the selection
12. Select Log Type at bottom of screen.

When you click on a station in WSJT-X, it will send data to JTAlert.
JTAlert will then send data to the N3FJP Log

In operation when you get the popup after the RR73 is sent. When you click log it will log to the
internal log and send the Log entry to N3FJP  log and it will log the contact.

Hope I did not miss a step or if unclear then read the published text files or post another question here

JoAnn Donaldson - AB8YZ

On Saturday, September 5, 2020, 12:17:11 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:


This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>




--
Hams should be seen as well as heard, 73, Dave KC3AM


Re: Maybe wrong place for ?

n0dpr@comcast.netLEhU9NJpW <n0dpr@...>
 

Good point Jim, I guess one way to look at it is that we should have access to many Elmer’s in today’s technical world. And, it gives those with knowledge the opportunity to become an Elmer to those of us who struggle with certain issues.
Keep up the good work.
Brad

Sent from Xfinity Connect App



------ Original Message ------

From: Jim Shorney
To: n3fjp
Sent: September 5, 2020 at 4:00 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

Yes! There does seem to be a lack of intellectual curiosity regarding exploring the menu system of the software of the day and saying "oooh, what does THAT do?". I suppose people are afraid of breaking things. Whatever did hams do before the internet? With only a copy of the "handbook", our own ingenuity, and hopefully a helpful Elmer or two we still managed to get signals on the air! :D 73 -Jim NU0C On Sat, 05 Sep 2020 16:20:43 -0400 "Gary Woods" wrote: > I often find out useful things about software by rummaging about the > menus. The more cautious might want to stash a backup copy of the > appropriate config file(s) somewhere, especially of one's typing > (never great, and age has not improved) is a bit dodgy.


Re: Maybe wrong place for ?

Jim Shorney
 

Yes! There does seem to be a lack of intellectual curiosity regarding exploring the menu system of the software of the day and saying "oooh, what does THAT do?". I suppose people are afraid of breaking things. Whatever did hams do before the internet? With only a copy of the "handbook", our own ingenuity, and hopefully a helpful Elmer or two we still managed to get signals on the air! :D

73

-Jim
NU0C



On Sat, 05 Sep 2020 16:20:43 -0400
"Gary Woods" <garygarlic@earthlink.net> wrote:

I often find out useful things about software by rummaging about the
menus. The more cautious might want to stash a backup copy of the
appropriate config file(s) somewhere, especially of one's typing
(never great, and age has not improved) is a bit dodgy.


Re: Maybe wrong place for ?

Gary Woods
 

On Sat, 5 Sep 2020 17:11:08 +0000 (UTC), you wrote:

A simple yes answer would have sufficed, as you didn't ask for any details, but Gary was also kind enough to elaborate and let you know that there is easy documentation to accomplish what you want to do.
At the risk of prolonging this thread:
I often find out useful things about software by rummaging about the
menus. The more cautious might want to stash a backup copy of the
appropriate config file(s) somewhere, especially of one's typing
(never great, and age has not improved) is a bit dodgy.
Oh, an impolite reply might have been "RTFM."
--
Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver
fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: ACLog

JoAnn Donaldson
 

Thanks, I went and changed the font for the TEXT and now the two clocks are not cut off at the bottom.

JoAnn Donaldson - AB8YZ

On Saturday, September 5, 2020, 9:31:22 AM CDT, Scott Davis via groups.io <snkdavis@...> wrote:


Hi JoAnn,

Thanks for your e-mail.  Yes, to change the fonts, click Settings > Appearance > Colors and Fonts.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Fri, Sep 4, 2020 4:22 pm
Subject: [N3FJPSoftwareUsers] ACLog

I do not run ACLog in Full Screen as i want to also run other Ham Radio Apps. I noticed that the bottom of the UTC is cut off, if I have the App not in Full Screen. is here a way to correct this? I tried moving the Comment Block down a bit but the UTC is still cut off. I also move both the Local and UTC up a tad but UTC is still cut off the bottom. Is there way to change the Font of the Local and UTC?

JoAnn Donaldson - AB8YZ


Re: Maybe wrong place for ?

n0dpr@comcast.netLEhU9NJpW <n0dpr@...>
 

👍

Sent from Xfinity Connect App



------ Original Message ------

From: JoAnn Donaldson via groups.io
To: n3fjp
Sent: September 5, 2020 at 1:09 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

Brad
NØDPR

Feel free to ask ANY Question you may have. it is NOT intuitive with those two programs on how to interface them with other Loggers.

JoAnn donaldson - AB8YZ

On Saturday, September 5, 2020, 1:03:05 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:


Don't worry about it Brad.  Ask as many as you want to ask.  This is a GREAT group, here.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:22 PM n0dpr@... <n0dpr@...> wrote:
I get it. I will try and limit my comments to only a question.
I’m sorry if I offended anyone, I’m just a not very techie old guy trying to learn a new skill.
73
Brad

Sent from Xfinity Connect App



------ Original Message ------

From: Lou Everett, Sr.
To: n3fjp
Sent: September 5, 2020 at 12:17 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>





Re: Maybe wrong place for ?

JoAnn Donaldson
 

Brad
NØDPR

Feel free to ask ANY Question you may have. it is NOT intuitive with those two programs on how to interface them with other Loggers.

JoAnn donaldson - AB8YZ

On Saturday, September 5, 2020, 1:03:05 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:


Don't worry about it Brad.  Ask as many as you want to ask.  This is a GREAT group, here.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:22 PM n0dpr@... <n0dpr@...> wrote:
I get it. I will try and limit my comments to only a question.
I’m sorry if I offended anyone, I’m just a not very techie old guy trying to learn a new skill.
73
Brad

Sent from Xfinity Connect App



------ Original Message ------

From: Lou Everett, Sr.
To: n3fjp
Sent: September 5, 2020 at 12:17 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>





Re: QRZ.com checked...,

Randy Allen
 

Or GridTracker?


Re: Maybe wrong place for ?

Lou Everett, Sr. <loueverettsr@...>
 

Don't worry about it Brad.  Ask as many as you want to ask.  This is a GREAT group, here.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:22 PM n0dpr@... <n0dpr@...> wrote:
I get it. I will try and limit my comments to only a question.
I’m sorry if I offended anyone, I’m just a not very techie old guy trying to learn a new skill.
73
Brad

Sent from Xfinity Connect App



------ Original Message ------

From: Lou Everett, Sr.
To: n3fjp
Sent: September 5, 2020 at 12:17 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>





Re: Maybe wrong place for ?

n0dpr@comcast.netLEhU9NJpW <n0dpr@...>
 

Your awesome, it works perfectly, thanks so much for your help.
73
Brad
NØDPR

Sent from Xfinity Connect App



------ Original Message ------

From: ARRL
To: n3fjp
Sent: September 5, 2020 at 12:40 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

Thank you JoAnn,
I appreciate your answer, very clear and helpful. Probably the best answer I ever got from a question that I asked on any forum.
73
Brad
NØDPR

Sent from Xfinity Connect App



------ Original Message ------

From: JoAnn Donaldson via groups.io
To: n3fjp
Sent: September 5, 2020 at 12:30 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

To get WSJT-X and JTAlert to interface with the N3FJP log

1. Fire up ACLog
2. Fire up WSIT-X
3. Fire up JTAlert
4. In JTAlert select Settings
5. Select Manage Settings
6. Select Logging
7. Select ACLog
8. Check Enable ACLogging
9. Check the two boxs below enable
10. Select Auto or manual
11. fill out the boxes for the selection
12. Select Log Type at bottom of screen.

When you click on a station in WSJT-X, it will send data to JTAlert.
JTAlert will then send data to the N3FJP Log

In operation when you get the popup after the RR73 is sent. When you click log it will log to the
internal log and send the Log entry to N3FJP  log and it will log the contact.

Hope I did not miss a step or if unclear then read the published text files or post another question here

JoAnn Donaldson - AB8YZ

On Saturday, September 5, 2020, 12:17:11 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:


This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>





Re: Maybe wrong place for ?

n0dpr@comcast.netLEhU9NJpW <n0dpr@...>
 

Thank you JoAnn,
I appreciate your answer, very clear and helpful. Probably the best answer I ever got from a question that I asked on any forum.
73
Brad
NØDPR

Sent from Xfinity Connect App



------ Original Message ------

From: JoAnn Donaldson via groups.io
To: n3fjp
Sent: September 5, 2020 at 12:30 PM
Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?

To get WSJT-X and JTAlert to interface with the N3FJP log

1. Fire up ACLog
2. Fire up WSIT-X
3. Fire up JTAlert
4. In JTAlert select Settings
5. Select Manage Settings
6. Select Logging
7. Select ACLog
8. Check Enable ACLogging
9. Check the two boxs below enable
10. Select Auto or manual
11. fill out the boxes for the selection
12. Select Log Type at bottom of screen.

When you click on a station in WSJT-X, it will send data to JTAlert.
JTAlert will then send data to the N3FJP Log

In operation when you get the popup after the RR73 is sent. When you click log it will log to the
internal log and send the Log entry to N3FJP  log and it will log the contact.

Hope I did not miss a step or if unclear then read the published text files or post another question here

JoAnn Donaldson - AB8YZ

On Saturday, September 5, 2020, 12:17:11 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:


This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU




On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>




4541 - 4560 of 48076