|
Re: MULTIPLE LOGS
Phil Whitchurch <phil@...>
Thanks Scott That seems to work OK but I see that the "standard" wording of the comment on the last row of the label has not been saved and I would not want to have to enter this every time. Can this be made to save as a boiler plate text please? Also, Is it possible to configure the QSL label to have (say) a
different colour for the callsign, another for the text and a
third for the Standard message please? 73 for now Phil, G3SWH On 19/08/2020 11:20, Scott Davis via
groups.io wrote:
-- Phil Whitchurch G3SWH and AD5YS www.g3swh.org.uk Work is the curse of the drinking classes.
|
|
|
|
Re: Messsage
Scott Davis
Hi Scott,
Thanks for your e-mail. Please do the following:
- Click Settings > Rig Interface and make sure N3FJP API isn't selected.
- Click Setting > Transmit > CW and make sure N3FJP API isn't selected.
- Click Settings > API and make sure the bottom check box isn't checked.
That will do the trick.
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Scott Thayer <w7sot700@...> To: N3FJPSoftwareUsers@groups.io Sent: Tue, Aug 18, 2020 10:09 pm Subject: [N3FJPSoftwareUsers] Messsage Good evening, having an issue, and just not sure where to start looking - I keep getting this pop-ip running amature contact log
The onlyI have don'e is set things up - so that it gets info from fldigi and WSJT-X, both of those are working great, and the both use port 2237, I don't have anything set up to use poer 1100 and I have followed the suggestions in the pop to fix the problem, neither one those helped me, so hopefully someone out their knows whats going on and can at least point me in the right direction.]
Thanks,
Scott
|
|
|
|
Re: MULTIPLE LOGS
Scott Davis
Hi Phil,
Thanks for your follow up. AC Log will print batches of labels. Just multi select all the labels you wish to print and then click Print QSL Strip.
Thanks again for your interest! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Phil Whitchurch <phil@...> To: N3FJPSoftwareUsers@groups.io Sent: Wed, Aug 19, 2020 5:13 am Subject: Re: [N3FJPSoftwareUsers] MULTIPLE LOGS Thanks again Jim
Yes, I can see that as a possible work around but the major obstacle as far as I can see so far is the inability for the program to be able to print a batch of QSL labels for a single DX callsign. As I said before, I've been using Win-EQF for many years but it is no longer supported and doesn't work well under Windows 10, which is why I'm looking for an alternative. However, as far as QSL management is concerned, this is probably the most important feature of it. 73 for now Phil G3SWH On 19/08/2020 02:19, Jim Shorney wrote: > I was thinking of one account to deal with all your manager work. Of course you would be using a different log file for each call, which is what you would be doing anyway. But your home configuration under your main account would remain unchanged. > > 73 > > -Jim > NU0C > > On Tue, 18 Aug 2020 12:06:57 +0100 > "Phil Whitchurch" <phil@...> wrote: > >> Thanks for the suggestion Jim but with 150+ logs to work with, it looks >> a bit impractical. >> >> 73 for now >> >> Phil, G3SWH >> >> On 16/08/2020 19:05, Jim Shorney wrote: >>> You could use a different Windows user account for your QSL manager activities as described here: >>> >>> http://www.n3fjp.com/faq.html#q92 >>> >>> 73 >>> >>> -Jim >>> NU0C >>> >>> On Sun, 16 Aug 2020 18:38:25 +0100 >>> "Phil Whitchurch" <phil@...> wrote: >>> >>>> Thanks Scott >>>> >>>> So far, it all looks good. >>>> >>>> Is there a way of making my primary log (G3SWH) the default on opening >>>> the program rather than have to select it each time please? >>>> >>>> 73 for now >>>> >>>> Phil, G3SWH >>>> >>>> On 16/08/2020 12:25, Scott Davis via groups.io wrote: >>>>> Hi Phil, >>>>> >>>>> Thanks for your e-mail. Yes, first click File > New > New Database >>>>> and create a new log file for the call sign of the ADIF file you are >>>>> about to import. >>>>> >>>>> Thanks for your interest in my software! >>>>> >>>>> Enjoy! >>>>> >>>>> 73, Scott >>>>> N3FJP >>>>> _http://www.n3fjp.com_ <http://www.n3fjp.com/> >>>>> >>>>> /Serving the Amateur Radio community with contesting and general >>>>> logging software since 1997./ >>>>> >>>>> 1 Peter 3 vs 15: /Always be prepared to give an answer to everyone who >>>>> asks you to give _the reason for <http://www.n3fjp.com/Faith.htm>the >>>>> hope that you have <http://www.n3fjp.com/Faith.htm>_. But do this with >>>>> gentleness and respect/... >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: Phil Whitchurch <phil@...> >>>>> To: N3FJPSoftwareUsers@groups.io >>>>> Sent: Sun, Aug 16, 2020 7:11 am >>>>> Subject: [N3FJPSoftwareUsers] MULTIPLE LOGS >>>>> >>>>> Hi there >>>>> >>>>> I am a potential new user and established QSL manager. I have been >>>>> searching for an alternative to the Win-EQFlogging program that I have >>>>> been using for over 25 years but which is no lomnger supported and does >>>>> not work well under Windows 10. >>>>> >>>>> I have downloaded and installed a trial version of AClog and at first >>>>> sight, it seems to meet my requirements but I am not sure if I can >>>>> import more than one ADI file. I have something approaching 150 >>>>> different log files for various DX callsigns that I need to be able to >>>>> import and manage independently. >>>>> >>>>> Can this be achieved please? >>>>> >>>>> 73 for now and TIA. >>>>> >>>>> -- >>>>> Phil Whitchurch >>>>> G3SWH and AD5YS >>>>> >>>>> www.g3swh.org.uk >>>>> >>>>> Work is the curse of the drinking classes. >>>>> >>>>> >>>>> -- >>>>> This email has been checked for viruses by AVG. >>>>> https://www.avg.com <https://www.avg.com/> >>>>> >>>>> >>>>> >>>>> >>>>> >>> >>> > > > -- Phil Whitchurch G3SWH and AD5YS www.g3swh.org.uk Work is the curse of the drinking classes.
|
|
|
|
Re: DX Spotting Stops
Scott Davis
Hi Mel,
Thanks for your e-mail. The two most common causes for what you describe are:
- You PC going to sleep.
- An Intermittent Internet connection.
You can try enabling the Keep Alive function on the DX Spotting set up form, but with it failing as fast as you describe, you will likely have to remedy your connection to keep the DX Spotting active.
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Mel - N7GCO - Cheney, WA <teammel@...> To: N3FJPSoftwareUsers@groups.io Sent: Tue, Aug 18, 2020 6:55 pm Subject: [N3FJPSoftwareUsers] DX Spotting Stops I love the spotting feature of Scott's programs, but I must have some setting wrong and would appreciate it if someone could give me a clue where to look. I launch the spotting program and it works great and then it quits showing new spots. I have cleared both Scott's programs and port 30 to pass everything through the firewall. If I turn the Spotting program off and then back on it shows new spots, but then a few minutes later it quits updating.
|
|
|
|
Re: Which log do we use for the WW Digi DX Contest
Scott Davis
Hi Mel,
Thanks for your e-mail. I don't currently support the WW Digi DX Contest. Please see this FAQ here:
http://www.n3fjp.com/faq.html#q73
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Mel - N7GCO - Cheney, WA <teammel@...> To: N3FJPSoftwareUsers@groups.io Sent: Tue, Aug 18, 2020 6:51 pm Subject: [N3FJPSoftwareUsers] Which log do we use for the WW Digi DX Contest I was wondering which N3FJP log to use for the World Wide Digi coming up August 29-30?
|
|
|
|
Messsage
Scott Thayer
Good evening, having an issue, and just not sure where to start looking - I keep getting this pop-ip running amature contact log The onlyI have don'e is set things up - so that it gets info from fldigi and WSJT-X, both of those are working great, and the both use port 2237, I don't have anything set up to use poer 1100 and I have followed the suggestions in the pop to fix the problem, neither one those helped me, so hopefully someone out their knows whats going on and can at least point me in the right direction.] Thanks, Scott
|
|
|
|
Re: MULTIPLE LOGS
Phil Whitchurch <phil@...>
Thanks again Jim
toggle quoted messageShow quoted text
Yes, I can see that as a possible work around but the major obstacle as far as I can see so far is the inability for the program to be able to print a batch of QSL labels for a single DX callsign. As I said before, I've been using Win-EQF for many years but it is no longer supported and doesn't work well under Windows 10, which is why I'm looking for an alternative. However, as far as QSL management is concerned, this is probably the most important feature of it. 73 for now Phil G3SWH
On 19/08/2020 02:19, Jim Shorney wrote:
I was thinking of one account to deal with all your manager work. Of course you would be using a different log file for each call, which is what you would be doing anyway. But your home configuration under your main account would remain unchanged. --
Phil Whitchurch G3SWH and AD5YS www.g3swh.org.uk Work is the curse of the drinking classes.
|
|
|
|
Re: Which log do we use for the WW Digi DX Contest
JoAnn Donaldson
I am planning on setting up a Separate Log under ACLog using WSIT-X/JTAlert combo to feed the Log. That way the Grid Code will get Logged without having to enter it. There is really NO Contest Logger for this one. JoAnn - AB8YZ
On Tuesday, August 18, 2020, 5:51:33 PM CDT, Mel - N7GCO - Cheney, WA <teammel@...> wrote:
I was wondering which N3FJP log to use for the World Wide Digi coming up August 29-30?
|
|
|
|
Re: MULTIPLE LOGS
I was thinking of one account to deal with all your manager work. Of course you would be using a different log file for each call, which is what you would be doing anyway. But your home configuration under your main account would remain unchanged.
73 -Jim NU0C On Tue, 18 Aug 2020 12:06:57 +0100 "Phil Whitchurch" <phil@g3swh.org.uk> wrote: Thanks for the suggestion Jim but with 150+ logs to work with, it looks
|
|
|
|
DX Spotting Stops
Mel - N7GCO - Cheney, WA
I love the spotting feature of Scott's programs, but I must have some setting wrong and would appreciate it if someone could give me a clue where to look. I launch the spotting program and it works great and then it quits showing new spots. I have cleared both Scott's programs and port 30 to pass everything through the firewall. If I turn the Spotting program off and then back on it shows new spots, but then a few minutes later it quits updating.
|
|
|
|
Which log do we use for the WW Digi DX Contest
Mel - N7GCO - Cheney, WA
I was wondering which N3FJP log to use for the World Wide Digi coming up August 29-30?
|
|
|
|
Re: SARTG WW Contest
JoAnn Donaldson
W4GHV TU, I will add the WAE Contest Logger to my Contest Folder. JoAnn - AB8YZ - the 1st 2 and last 2 of the alphabet with an Infinity in the middle.
On Monday, August 17, 2020, 8:32:03 PM CDT, Bo W4GHV <bobarr@...> wrote:
The WAE logg program works fine. -- 73, Bo W4GHV since '54
|
|
|
|
Re: MULTIPLE LOGS
Phil Whitchurch <phil@...>
Thanks Scott I'll take that as a "no" then. :-) In my experience, defaulting to the last used log leads to far too many errors of new QSOs being entered in the wrong log, which is why I prefer a nominated default. Also, in view of K7GA's and your comments about the inability of the program to print batches of QSL labels, I'm beginning to think that your program is not for me. However, I will continue to evaluate it for the time being. 73 for now Phil, G3SWH
On 16/08/2020 18:53, Scott Davis via
groups.io wrote:
-- Phil Whitchurch G3SWH and AD5YS www.g3swh.org.uk Work is the curse of the drinking classes.
|
|
|
|
Re: MULTIPLE LOGS
Phil Whitchurch <phil@...>
Thanks for the suggestion Jim but with 150+ logs to work with, it looks a bit impractical.
toggle quoted messageShow quoted text
73 for now Phil, G3SWH
On 16/08/2020 19:05, Jim Shorney wrote:
You could use a different Windows user account for your QSL manager activities as described here: --
Phil Whitchurch G3SWH and AD5YS www.g3swh.org.uk Work is the curse of the drinking classes.
|
|
|
|
Re: SARTG WW Contest
The WAE logg program works fine.
-- 73, Bo W4GHV since '54
|
|
|
|
locked
Re: ;-(
Scott Davis
Hi All,
This thread has detoured from N3FJP Software support, so I am terminating it here. Please feel free to continue direct.
Thanks! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: deni <deni@...> To: N3FJPSoftwareUsers@groups.io Sent: Mon, Aug 17, 2020 3:43 pm Subject: Re: [N3FJPSoftwareUsers] ;-(
Very Happy for you. I have worked WAS in 20 days and only 1 more
for DXCC. Of course, I do not sleep either.
73 - deni On 8/17/2020 1:44 PM, Archibald Delfish
via groups.io wrote:
Took me less than 58 days to work all States and all Continents,
all confirm via LOTW.
All this was FT 8 and FT 4.
All this was done during the COVID lock down.
XS Max
On Aug 17, 2020, at 2:31 PM, Christopher Scibelli via groups.io <nu1oscar@...> wrote:
|
|
|
|
locked
Re: ;-(
deni
Very Happy for you. I have worked WAS in 20 days and only 1 more
for DXCC. Of course, I do not sleep either.
toggle quoted messageShow quoted text
73 - deni
On 8/17/2020 1:44 PM, Archibald Delfish
via groups.io wrote:
Took me less than 58 days to work all States and all Continents, all confirm via LOTW.
|
|
|
|
locked
Re: ;-(
Archibald Delfish
Took me less than 58 days to work all States and all Continents, all confirm via LOTW.
toggle quoted messageShow quoted text
All this was FT 8 and FT 4. All this was done during the COVID lock down. XS Max
On Aug 17, 2020, at 2:31 PM, Christopher Scibelli via groups.io <nu1oscar@...> wrote:
|
|
|
|
locked
Re: ;-(
Christopher Scibelli
I took me 51 QSOs with West Virginia before I finally found a station that confirmed using LoTW. That was about 10 years ago. Maybe things have improved since. 73, Chris NU1O
-----Original Message-----
From: W5DET <w5det@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Sat, Aug 15, 2020 5:40 pm Subject: Re: [N3FJPSoftwareUsers] ;-( Hi Deni, [quote]Also I might like to say that I am very confused by the logging. Looking at rewards I only have 5 states to go for WAS, however I have worked those 5 many times.[/quote] Until the other station confirms the contact, it won't show in your awards count. Also, for WAS it must be confirmed via LOTW or paper QSL Card or ARRL won't accept it. I don't know if the logic in ACL makes that differentiation. 73, Doug, W5DET
|
|
|
|
Re: Changing Font
Fred K2DFC
Thanks Scott, my eyes must have blurred over that line when I was looking. Got everything working just as I like it now.
-- 73 Fred K2DFC
|
|
|
