1. N3FJPSoftwareUsers@groups.io
   Date   
locked Re: ;-(

deni
 

Very Happy for you.  I have worked WAS in 20 days and only 1 more for DXCC.  Of course, I do not sleep either.

73 - deni

On 8/17/2020 1:44 PM, Archibald Delfish via groups.io wrote:
Took me less than 58 days to work all States and all Continents,  all confirm via LOTW.
All this was FT 8  and FT 4.
All this was done during the COVID lock down.

XS Max

On Aug 17, 2020, at 2:31 PM, Christopher Scibelli via groups.io <nu1oscar@...> wrote:


I took me 51 QSOs with West Virginia before I finally found a station that confirmed using LoTW. That was about 10 years ago.  Maybe things have improved since.

73,

Chris  NU1O
locked Re: ;-(

Archibald Delfish
 

Took me less than 58 days to work all States and all Continents,  all confirm via LOTW.
All this was FT 8  and FT 4.
All this was done during the COVID lock down.

XS Max

On Aug 17, 2020, at 2:31 PM, Christopher Scibelli via groups.io <nu1oscar@...> wrote:


I took me 51 QSOs with West Virginia before I finally found a station that confirmed using LoTW. That was about 10 years ago.  Maybe things have improved since.

73,

Chris  NU1O
_._,_._,_
locked Re: ;-(

Christopher Scibelli
 

I took me 51 QSOs with West Virginia before I finally found a station that confirmed using LoTW. That was about 10 years ago.  Maybe things have improved since.

73,

Chris  NU1O

-----Original Message-----
From: W5DET <w5det@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Aug 15, 2020 5:40 pm
Subject: Re: [N3FJPSoftwareUsers] ;-(

Hi Deni,

[quote]Also I might like to say that I am very confused by the logging. Looking at rewards I only have 5 states to go for WAS, however I have worked those 5 many times.[/quote]

Until the other station confirms the contact, it won't show in your awards count.  Also, for WAS it must be confirmed via LOTW or paper QSL Card or ARRL won't accept it.  I don't know if the logic in ACL makes that differentiation.

73, Doug, W5DET

Re: Changing Font

Fred K2DFC
 

Thanks Scott, my eyes must have blurred over that line when I was looking. Got everything working just as I like it now.

--
73
Fred
K2DFC
Re: ARRL RTTY Roundup Contest Log

Scott Davis
 

Hi JoAnn,

Thanks for your e-mail.  In the contest software, green indicates needed sections that have been spotted.  Click on the section to tune to the spot frequency.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: n3fjpsoftwareusers@groups.io <n3fjpsoftwareusers@groups.io>
Sent: Sun, Aug 16, 2020 4:23 pm
Subject: [N3FJPSoftwareUsers] ARRL RTTY Roundup Contest Log

I just noticed that two of the States are colored GREEN and I have NOT worked those States. So what is going on.
Normally in ACLog GREEN would mean Sent QSL but have not received QSL.

JoAnn Donaldson - AB8YZ
Re: QSL printing

K7GA
 

Roger that Scott. Tks!

Sent from Geoff’s iPhone X

On Aug 16, 2020, at 13:47, Scott Davis via groups.io <SNKDavis@...> wrote:


Hi Geoff,

Thanks for your follow up.  I may have misread your original e-mail.  You can print up to 5 QSOs with the same station on one label.  Just hold Ctrl to multi select.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Aug 16, 2020 4:24 pm
Subject: Re: [N3FJPSoftwareUsers] QSL printing

I get it. That’s exactly what I do now if just replying to one station.  But when I have 10’s or 100’s of QSL queries to answer and highlight all those calls and hit “print labels” it would be nice to also have that feature for those stations I have had multiple contacts with print on one label. As it stands now, if I have a pile of cards to answer, I literally have to do them one at a time, which is ok but labor and time consuming. 

73/Geoff 

Sent from Geoff’s iPhone X

On Aug 16, 2020, at 12:59, Scott Davis via groups.io <SNKDavis@...> wrote:


Hi Geoff,

Thanks for sending along your thoughts and suggestions.  I will give that some thought for the future.

Thanks for your kind words on the software!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 3:09 pm
Subject: [N3FJPSoftwareUsers] QSL printing

Scott,
long time user of your various  logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.  
Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label. 

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station. 
Would it be possible for you to include  the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
Re: Passing ACL database from a shortcut

Lawrence Dobranski
 

Scott,

If I may.

Having a configuration selected by name from the command line might be another option.   This would allow you to start with the ACL database and then over time add other parameters.

I am running multiple rigs and configurations — to select each configuration in ACL requires a lot of mouse clicks and data entry.

Currently I am using two separate machines.  I am considering multiple virtual machines to accomplish this — each with there own instance of ACL in a different configuration.

Thanks for the consideration.

73 de VA3IQ

Lawrence


On Sun, Aug 16, 2020 at 3:20 PM Louis Ricci <wc2w@...> wrote:
Hi Scott,

For those of us with multiple QTH's and/or multiple hams in the same household, this feature would be wonderful.  To make it easier for the casual user,  if the database file name is not specified maybe it would be possible to default to what you have now (LodData.mdb)?

Thanks for giving this some consideration.

Lou
WC2W
Re: SARTG WW Contest

Pat Whelton
 

Great and I’d like one that supports the QRP Fox Hunts.  The Fox Hunts have been going on every Tuesday and Thursday for years.

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of JoAnn Donaldson via groups.io
Sent: Sunday, August 16, 2020 4:06 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] SARTG WW Contest

 

I would like to vote for a Contest Log that supports the SARTG WW Contest. These are very popular contests.

 

JoAnn Donaldson - AB8YZ

_._,_._,_
SARTG WW Contest

JoAnn Donaldson
 

I would like to vote for a Contest Log that supports the SARTG WW Contest. These are very popular contests.

JoAnn Donaldson - AB8YZ
Re: QSL printing

Scott Davis
 

Hi Geoff,

Thanks for your follow up.  I may have misread your original e-mail.  You can print up to 5 QSOs with the same station on one label.  Just hold Ctrl to multi select.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Aug 16, 2020 4:24 pm
Subject: Re: [N3FJPSoftwareUsers] QSL printing

I get it. That’s exactly what I do now if just replying to one station.  But when I have 10’s or 100’s of QSL queries to answer and highlight all those calls and hit “print labels” it would be nice to also have that feature for those stations I have had multiple contacts with print on one label. As it stands now, if I have a pile of cards to answer, I literally have to do them one at a time, which is ok but labor and time consuming. 

73/Geoff 

Sent from Geoff’s iPhone X

On Aug 16, 2020, at 12:59, Scott Davis via groups.io <SNKDavis@...> wrote:


Hi Geoff,

Thanks for sending along your thoughts and suggestions.  I will give that some thought for the future.

Thanks for your kind words on the software!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 3:09 pm
Subject: [N3FJPSoftwareUsers] QSL printing

Scott,
long time user of your various  logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.  
Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label. 

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station. 
Would it be possible for you to include  the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
Re: QSL printing

Jim Shorney
 

Maybe this in the meantime?

https://www.df3cb.com/bv/features.php

73

-Jim
NU0C

On Sun, 16 Aug 2020 20:24:47 +0000
"K7GA" <k7ga@outlook.com> wrote:

I get it. That’s exactly what I do now if just replying to one station. But when I have 10’s or 100’s of QSL queries to answer and highlight all those calls and hit “print labels” it would be nice to also have that feature for those stations I have had multiple contacts with print on one label. As it stands now, if I have a pile of cards to answer, I literally have to do them one at a time, which is ok but labor and time consuming.

73/Geoff

Sent from Geoff’s iPhone X

On Aug 16, 2020, at 12:59, Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:


Hi Geoff,

Thanks for sending along your thoughts and suggestions. I will give that some thought for the future.

Thanks for your kind words on the software!

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com<;https://eur06.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.n3fjp.com%2F&;data=02%7C01%7C%7Ced8ba128fe4d41b63b2508d8421ee023%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637332047655086703&sdata=9shpUvS0C2rLNbc9rb%2FjokNBHH0l%2Fuc%2FrdN%2BUMGk8Dk%3D&reserved=0>

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for <https://eur06.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.n3fjp.com%2FFaith.htm&;data=02%7C01%7C%7Ced8ba128fe4d41b63b2508d8421ee023%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637332047655086703&sdata=mYt5Yf0DedvrH4%2BsJHHGT4hcMJf671fYocHTu7sp1mU%3D&reserved=0> the hope that you have<https://eur06.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.n3fjp.com%2FFaith.htm&;data=02%7C01%7C%7Ced8ba128fe4d41b63b2508d8421ee023%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637332047655086703&sdata=mYt5Yf0DedvrH4%2BsJHHGT4hcMJf671fYocHTu7sp1mU%3D&reserved=0>. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@outlook.com>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 3:09 pm
Subject: [N3FJPSoftwareUsers] QSL printing

Scott,
long time user of your various logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.
Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label.

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station.
Would it be possible for you to include the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
Re: QSL printing

K7GA
 

I get it. That’s exactly what I do now if just replying to one station.  But when I have 10’s or 100’s of QSL queries to answer and highlight all those calls and hit “print labels” it would be nice to also have that feature for those stations I have had multiple contacts with print on one label. As it stands now, if I have a pile of cards to answer, I literally have to do them one at a time, which is ok but labor and time consuming. 

73/Geoff 

Sent from Geoff’s iPhone X

On Aug 16, 2020, at 12:59, Scott Davis via groups.io <SNKDavis@...> wrote:


Hi Geoff,

Thanks for sending along your thoughts and suggestions.  I will give that some thought for the future.

Thanks for your kind words on the software!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 3:09 pm
Subject: [N3FJPSoftwareUsers] QSL printing

Scott,
long time user of your various  logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.  
Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label. 

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station. 
Would it be possible for you to include  the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
ARRL RTTY Roundup Contest Log

JoAnn Donaldson
 

I just noticed that two of the States are colored GREEN and I have NOT worked those States. So what is going on.
Normally in ACLog GREEN would mean Sent QSL but have not received QSL.

JoAnn Donaldson - AB8YZ
Re: QSL printing

Scott Davis
 

Hi Geoff,

Thanks for sending along your thoughts and suggestions.  I will give that some thought for the future.

Thanks for your kind words on the software!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K7GA <k7ga@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 3:09 pm
Subject: [N3FJPSoftwareUsers] QSL printing

Scott,
long time user of your various  logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.  
Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label. 

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station. 
Would it be possible for you to include  the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
Re: QSL printing

Pat Whelton
 

Hi Geoff.  When I have multiple QSOs with the same station and want to send them one QSL with multiple QSOs here’s the procedure I use:

 

  1. Enter call (i.e.:  LZ1QN)
  2. Hit TAB
  3. If you had multiple QSOs with LZ1QN hi-lite the first QSO you want to send a QSL to then hold down the SHIFT key and hi-lite all he other QSOs you want to QSL.
  4. Load labels into printer.
  5. Hit Print QSL
  6. Select label (i.e.: Row 6 Column 2).
  7. Hit Print.

 

In my example I had worked LZ1QN four times but I only wanted 3 QSLs.  My label came out looking like this:

 

Confirming QSOs with LZ1QN

8/6/2020     22:03   20   CW   579

2/21/2016   14:53   15   CW   599

11/29/2015  14:31  15   CW   599

Tnx QSO.  73, Pat – KZ5J

 

Hope this helps.   Your mileage will probably vary but it seems to work for me.  Also you can get more QSOs on the label by decreasing the font size.

 

Good luck.

 

Regards,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of K7GA
Sent: Sunday, August 16, 2020 2:09 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QSL printing

 

Scott,
long time user of your various  logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.  

Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label. 

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station. 

Would it be possible for you to include  the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
Re: Passing ACL database from a shortcut

Louis Ricci
 

Hi Scott,

For those of us with multiple QTH's and/or multiple hams in the same household, this feature would be wonderful.  To make it easier for the casual user,  if the database file name is not specified maybe it would be possible to default to what you have now (LodData.mdb)?

Thanks for giving this some consideration.

Lou
WC2W
QSL printing

K7GA
 

Scott,
long time user of your various  logs - still most happy with looking at the screen and seeing what closely resembles the old paper log sheets of bygone days,
as well as all the great features.  

Have recently been using the label printing feature for QSO info when sending paper QSL cards. If I select one specific callsign I have the option of printing multiple Q’s with that station on just one label. 

However, If I pick multiple stations to print their Q’s, I do not have the option of printing multiple Q’s of one station on one label. It only prints multiple labels for that one station. 

Would it be possible for you to include  the “print all “Q’s on one label” feature if I load multiple stations as well as just one station?

73/Geoff Morse K7GA
Re: MULTIPLE LOGS

Jim Shorney
 

You could use a different Windows user account for your QSL manager activities as described here:

http://www.n3fjp.com/faq.html#q92

73

-Jim
NU0C

On Sun, 16 Aug 2020 18:38:25 +0100
"Phil Whitchurch" <phil@g3swh.org.uk> wrote:

Thanks Scott

So far, it all looks good.

Is there a way of making my primary log (G3SWH) the default on opening
the program rather than have to select it each time please?

73 for now

Phil, G3SWH

On 16/08/2020 12:25, Scott Davis via groups.io wrote:
Hi Phil,

Thanks for your e-mail.  Yes, first click File > New > New Database
and create a new log file for the call sign of the ADIF file you are
about to import.

Thanks for your interest in my software!

Enjoy!

73, Scott
N3FJP
_http://www.n3fjp.com_ <http://www.n3fjp.com/>;

/Serving the Amateur Radio community with contesting and general
logging software since 1997./

1 Peter 3 vs 15: /Always be prepared to give an answer to everyone who
asks you to give _the reason for <http://www.n3fjp.com/Faith.htm>;the
hope that you have <http://www.n3fjp.com/Faith.htm>;_. But do this with
gentleness and respect/...


-----Original Message-----
From: Phil Whitchurch <phil@g3swh.org.uk>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 7:11 am
Subject: [N3FJPSoftwareUsers] MULTIPLE LOGS

Hi there

I am a potential new user and established QSL manager.  I have been
searching for an alternative to the Win-EQFlogging program that I have
been using for over 25 years but which is no lomnger supported and does
not work well under Windows 10.

I have downloaded and installed a trial version of AClog and at first
sight, it seems to meet my requirements but I am not sure if I can
import more than one ADI file.  I have something approaching 150
different log files for various DX callsigns that I need to be able to
import and manage independently.

Can this be achieved please?

73 for now and TIA.

--
Phil Whitchurch
G3SWH and AD5YS

www.g3swh.org.uk

Work is the curse of the drinking classes.


--
This email has been checked for viruses by AVG.
https://www.avg.com <https://www.avg.com/>;
Re: MULTIPLE LOGS

Scott Davis
 

Hi Phil,

Thanks for your follow up.  AC Log always defaults to the last log open.

Thanks for your kind words on the software!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Phil Whitchurch <phil@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 1:38 pm
Subject: Re: [N3FJPSoftwareUsers] MULTIPLE LOGS

Thanks Scott
So far, it all looks good.
Is there a way of making my primary log (G3SWH) the default on opening the program rather than have to select it each time please?
73 for now
Phil, G3SWH
On 16/08/2020 12:25, Scott Davis via groups.io wrote:
Hi Phil,

Thanks for your e-mail.  Yes, first click File > New > New Database and create a new log file for the call sign of the ADIF file you are about to import.

Thanks for your interest in my software!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Phil Whitchurch <phil@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 7:11 am
Subject: [N3FJPSoftwareUsers] MULTIPLE LOGS

Hi there

I am a potential new user and established QSL manager.  I have been
searching for an alternative to the Win-EQFlogging program that I have
been using for over 25 years but which is no lomnger supported and does
not work well under Windows 10.

I have downloaded and installed a trial version of AClog and at first
sight, it seems to meet my requirements but I am not sure if I can
import more than one ADI file.  I have something approaching 150
different log files for various DX callsigns that I need to be able to
import and manage independently.

Can this be achieved please?

73 for now and TIA.

--
Phil Whitchurch
G3SWH and AD5YS


Work is the curse of the drinking classes.


--
This email has been checked for viruses by AVG.




-- 
Phil Whitchurch
G3SWH and AD5YS

www.g3swh.org.uk

Work is the curse of the drinking classes.

Virus-free. www.avg.com

Re: Changing Font

Scott Davis
 

Hi Fred,

Thanks for your e-mail.  This is the option you are looking for:

Change Main Form Font (Bearing, etc.)

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Fred K2DFC via groups.io <k2dfc@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Aug 16, 2020 1:07 pm
Subject: [N3FJPSoftwareUsers] Changing Font

Just upgraded to latest version of ACLog. Would like to make the Font larger for the bearing, miles, cont., and the clocks. Not sure which one in the appearance tab will do that.
--
73
Fred
K2DFC
2861 - 2880 of 46124  
More
Home Messages Hashtags About Features Pricing Updates Terms Help Twitter