Date   

Re: Log Message

Ron Smith <n7rd@...>
 

That has happened to me before, yesterday I noticed it only happened once, and like Scott said I double tapped.

Ron N7RD

On Sun, Jul 12, 2020 at 1:05 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Dale,

Thanks for your e-mail.  Typically it takes less than 100 milliseconds for your log file to be updated.  There are two reasons you might see that error.

1.  When you entered the QSO, you very quickly double tapped the enter key.  If that is the case, all is well.

2.  Something unusual is causing a delay in entry such as a hardware / network delay, or Internet protection software delaying the entry of the previous QSO.

I hope that this helps.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K8TS <dalecole3502@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jul 12, 2020 3:46 pm
Subject: [N3FJPSoftwareUsers] Log Message

I got this message in a previous contest and did not think anything much about it.  Got it one or two times in IARU.
Paraphrasing:
“I am still working on previous entry, please try again”
This pops up when logging the qso.
???
I just kept trucking as there were other stations calling and did not want to waste time on a duplicate contact.
 
Other than that, everything worked flawless as expected.  Thanks for great programs!
Dale K8TS
 
Sent from Mail for Windows 10
 


Re: Log Contact Button + 2

Kevin Gray
 

Art,

Adding to what Scott said about #2, - pressing the “Enter” key on your keyboard does the same thing as clicking the Log Contact button.

(I cant ever remember clicking the Log Contact button. Hihih)

 

73 Kevin

N9VPV

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Sunday, July 12, 2020 1:55 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Log Contact Button + 2

 

Hi Art,

 

Thanks for your e-mail.  Responses are inserted:

 

1.  Is there a way to increase the size of the "bearing" and "miles" fonts fo those features?

 

**  Yes:  Settings > Appearance > Colors and fonts (make sure you are running a current version of AC Log).

 

2.  Is there a way to increase the size and change the color of the LOG CONTACT button?

 

**  Sorry, no.

 

3.  The COUNTY field does not automatically populate from QRZ.  Is that normal or is there a way to to turn that on?  Thank you!

 

**  All data that arrives from QRZ is added.  Make sure you only have one data source enabled.

 

Enjoy!

 

 

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Art Gribensk <kg4eyg@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 2:48 pm
Subject: [N3FJPSoftwareUsers] Log Contact Button + 2

Scott,

really enjoying tailoring my log.  Really outstanding, especially with my visual impairment.. Couple of questions:

 

1.  Is there a way to increase the size of the "bearing" and "miles" fonts fo those features?

 

2.  Is there a way to increase the size and change the color of the LOG CONTACT button?

 

3.  The COUNTY field does not automatically populate from QRZ.  Is that normal or is there a way to to turn that on?  Thank you!

 

Art Gribensk

 

Art Gribensk


Re: Log Message

Scott Davis
 

Hi Dale,

Thanks for your e-mail.  Typically it takes less than 100 milliseconds for your log file to be updated.  There are two reasons you might see that error.

1.  When you entered the QSO, you very quickly double tapped the enter key.  If that is the case, all is well.

2.  Something unusual is causing a delay in entry such as a hardware / network delay, or Internet protection software delaying the entry of the previous QSO.

I hope that this helps.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: K8TS <dalecole3502@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jul 12, 2020 3:46 pm
Subject: [N3FJPSoftwareUsers] Log Message

I got this message in a previous contest and did not think anything much about it.  Got it one or two times in IARU.
Paraphrasing:
“I am still working on previous entry, please try again”
This pops up when logging the qso.
???
I just kept trucking as there were other stations calling and did not want to waste time on a duplicate contact.
 
Other than that, everything worked flawless as expected.  Thanks for great programs!
Dale K8TS
 
Sent from Mail for Windows 10
 


Log Message

K8TS
 

I got this message in a previous contest and did not think anything much about it.  Got it one or two times in IARU.

Paraphrasing:

“I am still working on previous entry, please try again”

This pops up when logging the qso.

???

I just kept trucking as there were other stations calling and did not want to waste time on a duplicate contact.

 

Other than that, everything worked flawless as expected.  Thanks for great programs!

Dale K8TS

 

Sent from Mail for Windows 10

 


Re: IARU HF contest

Scott Davis
 

Hi Al,

Thanks for your e-mail.  IARU stations are one point, but if you originally entered them with the numerical zone, then the raw score had 5 points assigned (QSO points are assigned on entry).  If you then edited the QSO for the alphabetic identifier, but did not edit the points, that would be the most likely cause.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Al Duncan VE3RRD <ve3rrd@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 3:23 pm
Subject: [N3FJPSoftwareUsers] IARU HF contest

I used the latest version 4.8 of the ARRL IARU HF contest software for
the weekend contest and noticed that it indicated that I had made 113
contacts for 303 QSO points, and with 44 multipliers gave a total score
of 13332.

When I submitted my log to ARRL, it indicated 113 contacts for 293 QSO
points, and 44 multipliers for a total score of 12892.

Could the software not be counting QSO points per contact correctly in
some cases?

73

Al - VE3RRD





IARU HF contest

Al Duncan VE3RRD
 

I used the latest version 4.8 of the ARRL IARU HF contest software for the weekend contest and noticed that it indicated that I had made 113 contacts for 303 QSO points, and with 44 multipliers gave a total score of 13332.

When I submitted my log to ARRL, it indicated 113 contacts for 293 QSO points, and 44 multipliers for a total score of 12892.

Could the software not be counting QSO points per contact correctly in some cases?

73

Al - VE3RRD


Re: Log Contact Button + 2

Scott Davis
 

Hi Art,

Thanks for your e-mail.  Responses are inserted:

1.  Is there a way to increase the size of the "bearing" and "miles" fonts fo those features?

**  Yes:  Settings > Appearance > Colors and fonts (make sure you are running a current version of AC Log).

2.  Is there a way to increase the size and change the color of the LOG CONTACT button?

**  Sorry, no.

3.  The COUNTY field does not automatically populate from QRZ.  Is that normal or is there a way to to turn that on?  Thank you!

**  All data that arrives from QRZ is added.  Make sure you only have one data source enabled.

Enjoy!



73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Art Gribensk <kg4eyg@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 2:48 pm
Subject: [N3FJPSoftwareUsers] Log Contact Button + 2

Scott,
really enjoying tailoring my log.  Really outstanding, especially with my visual impairment.. Couple of questions:

1.  Is there a way to increase the size of the "bearing" and "miles" fonts fo those features?

2.  Is there a way to increase the size and change the color of the LOG CONTACT button?

3.  The COUNTY field does not automatically populate from QRZ.  Is that normal or is there a way to to turn that on?  Thank you!

Art Gribensk

Art Gribensk


Log Contact Button + 2

Art Gribensk <kg4eyg@...>
 

Scott,
really enjoying tailoring my log.  Really outstanding, especially with my visual impairment.. Couple of questions:

1.  Is there a way to increase the size of the "bearing" and "miles" fonts fo those features?

2.  Is there a way to increase the size and change the color of the LOG CONTACT button?

3.  The COUNTY field does not automatically populate from QRZ.  Is that normal or is there a way to to turn that on?  Thank you!

Art Gribensk

Art Gribensk


Re: IARU HQ station Points

kg4wyagi
 

Tim, looking at the rules, looks like 1 point is correct for HQ stations.

7.1. Contacts within your own ITU zone, as well as QSOs with any IARU-member society HQ station or IARU official (counting as the special multiplier), count one point each.

Ed
KG4W

On 7/12/2020 12:04 PM, Tim Thorson wrote:
All,

I finished this weekend's ARRL IARU contest with a handful of "HQ" stations near the end. Later I noticed that the points for the "HQ" stations contacted only reflect 1 point (in most cases) as if it was mistakenly considered a non DX contact.

image.png

It seems that the log entries that have correct points (example Rec 57 above) were the ones where I actually entered/saved the contact first with the default ITU number (by mistake). Then, I corrected the entry with the initials that the HQ station gave (Rec 57 ITUz corrected to "EDR" after it was saved as ITUz 18).  Else, I entered most HQ stations with the initials given for ITUz (which then incorrectly assigned only one point)...

Question: Bug? Feature? and Do I just submit, knowing my Score Statistics are incorrect, but it will be calculated correctly apon UL/processing by ARRL...(?)

Should my work-around be to enter/save with default ITUz and go back (in real time) correct all these?  - If my understanding is off on this, enlighten please.

Thank you Scott and all for the software!

I'm fairly new to this particular contest, it was a surprise to be able to contact more HQ stations (than last year) w/o crazy pileup...

PS - 5 days left to submit logs...

73, Tim  KD6HOF




Re: F Keys Position

BRUCE THOMPSON
 

Scott,

 

Yes, that’s what I am referring to.  Please, in the next update, provide a choice of either vertical or horizontal.  Depending on one’s layout, having a choice would be helpful.

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: July 12, 2020 08:13
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] F Keys Position

 

Hi Bruce,

 

Thanks for your e-mail.  If you are referring to the small form that displays what the F keys are mapped to, sorry, that only displays vertically.

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: BRUCE THOMPSON <ockmrzr@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 10:32 am
Subject: Re: [N3FJPSoftwareUsers] F Keys Position

No not the keyboard!  In AClog you can setup the F key to display on your screen.  The orientation is vertically, I want them to display horizontally on the screen.

 

73 de Bruce, N7TY

Yuma, AZ

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: July 12, 2020 07:29
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] F Keys Position

 

Let me guess, buy a keyboard with horizontal F-Keys?  Seems to me most current day keyboards have the F-Key placement horizontal.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of BRUCE THOMPSON
Sent: Sunday, July 12, 2020 9:16 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] F Keys Position

 

How do I get the F Keys to lay Horizontal, rather than Vertical in ACLog?

 

73 de Bruce, N7TY

Yuma, AZ

 


Re: IARU HQ station Points

Scott Davis
 

Hi Tim,

Thanks for your e-mail.  The software is correct, HQ stations are only one point.  You will find the complete rules here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Tim Thorson <kd6hof@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 12:04 pm
Subject: [N3FJPSoftwareUsers] IARU HQ station Points

All,

I finished this weekend's ARRL IARU contest with a handful of "HQ" stations near the end. Later I noticed that the points for the "HQ" stations contacted only reflect 1 point (in most cases) as if it was mistakenly considered a non DX contact.

image.png

It seems that the log entries that have correct points (example Rec 57 above) were the ones where I actually entered/saved the contact first with the default ITU number (by mistake). Then, I corrected the entry with the initials that the HQ station gave (Rec 57 ITUz corrected to "EDR" after it was saved as ITUz 18).  Else, I entered most HQ stations with the initials given for ITUz (which then incorrectly assigned only one point)...

Question: Bug? Feature? and Do I just submit, knowing my Score Statistics are incorrect, but it will be calculated correctly apon UL/processing by ARRL...(?)

Should my work-around be to enter/save with default ITUz and go back (in real time) correct all these?  - If my understanding is off on this, enlighten please.

Thank you Scott and all for the software!

I'm fairly new to this particular contest, it was a surprise to be able to contact more HQ stations (than last year) w/o crazy pileup...

PS - 5 days left to submit logs...

73, Tim  KD6HOF



IARU HQ station Points

Tim Thorson
 

All,

I finished this weekend's ARRL IARU contest with a handful of "HQ" stations near the end. Later I noticed that the points for the "HQ" stations contacted only reflect 1 point (in most cases) as if it was mistakenly considered a non DX contact.

image.png

It seems that the log entries that have correct points (example Rec 57 above) were the ones where I actually entered/saved the contact first with the default ITU number (by mistake). Then, I corrected the entry with the initials that the HQ station gave (Rec 57 ITUz corrected to "EDR" after it was saved as ITUz 18).  Else, I entered most HQ stations with the initials given for ITUz (which then incorrectly assigned only one point)...

Question: Bug? Feature? and Do I just submit, knowing my Score Statistics are incorrect, but it will be calculated correctly apon UL/processing by ARRL...(?)

Should my work-around be to enter/save with default ITUz and go back (in real time) correct all these?  - If my understanding is off on this, enlighten please.

Thank you Scott and all for the software!

I'm fairly new to this particular contest, it was a surprise to be able to contact more HQ stations (than last year) w/o crazy pileup...

PS - 5 days left to submit logs...

73, Tim  KD6HOF



Re: Media hit: IEEE Spectrum shows N3FJP software in use

Scott Davis
 

Thanks Dave!

We love media hits!  :)

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave <daveb@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 9:51 am
Subject: [N3FJPSoftwareUsers] Media hit: IEEE Spectrum shows N3FJP software in use

https://spectrum.ieee.org/telecom/wireless/the-uncertain-future-of-ham-radio

Picture showing John, AJ7M operating FD 2020 and using our favorite logging software.  (It's worth noting that the picture shows him logging with pen and paper as well.)
 
(please note: if you want to comment about the subject of that article, that is unrelated to
   the subject of supporting N3FJP software, so please follow up at IEEE
    or Facebook or wherever you discuss those things, and not here. Many thanks in advance.)


Re: F Keys Position

Scott Davis
 

Hi Bruce,

Thanks for your e-mail.  If you are referring to the small form that displays what the F keys are mapped to, sorry, that only displays vertically.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: BRUCE THOMPSON <ockmrzr@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jul 12, 2020 10:32 am
Subject: Re: [N3FJPSoftwareUsers] F Keys Position

No not the keyboard!  In AClog you can setup the F key to display on your screen.  The orientation is vertically, I want them to display horizontally on the screen.
 
73 de Bruce, N7TY
Yuma, AZ
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: July 12, 2020 07:29
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] F Keys Position
 
Let me guess, buy a keyboard with horizontal F-Keys?  Seems to me most current day keyboards have the F-Key placement horizontal.
 
73,
 
Pat – KZ5J
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of BRUCE THOMPSON
Sent: Sunday, July 12, 2020 9:16 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] F Keys Position
 
How do I get the F Keys to lay Horizontal, rather than Vertical in ACLog?
 
73 de Bruce, N7TY
Yuma, AZ
 


Re: F Keys Position

BRUCE THOMPSON
 

No not the keyboard!  In AClog you can setup the F key to display on your screen.  The orientation is vertically, I want them to display horizontally on the screen.

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: July 12, 2020 07:29
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] F Keys Position

 

Let me guess, buy a keyboard with horizontal F-Keys?  Seems to me most current day keyboards have the F-Key placement horizontal.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of BRUCE THOMPSON
Sent: Sunday, July 12, 2020 9:16 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] F Keys Position

 

How do I get the F Keys to lay Horizontal, rather than Vertical in ACLog?

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty

 


Re: F Keys Position

Pat Whelton
 

Let me guess, buy a keyboard with horizontal F-Keys?  Seems to me most current day keyboards have the F-Key placement horizontal.

 

73,

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of BRUCE THOMPSON
Sent: Sunday, July 12, 2020 9:16 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] F Keys Position

 

How do I get the F Keys to lay Horizontal, rather than Vertical in ACLog?

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty

 


F Keys Position

BRUCE THOMPSON
 

How do I get the F Keys to lay Horizontal, rather than Vertical in ACLog?

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty

 


Media hit: IEEE Spectrum shows N3FJP software in use

Dave
 

https://spectrum.ieee.org/telecom/wireless/the-uncertain-future-of-ham-radio

Picture showing John, AJ7M operating FD 2020 and using our favorite logging software.  (It's worth noting that the picture shows him logging with pen and paper as well.)

 

(please note: if you want to comment about the subject of that article, that is unrelated to
   the subject of supporting N3FJP software, so please follow up at IEEE
    or Facebook or wherever you discuss those things, and not here. Many thanks in advance.)


Re: IARU Contest log

Jimmy Tyree <jimmy.tyree@...>
 

Will do -Thanks

On Sunday, July 12, 2020, 3:32:52 AM CDT, Art Gribensk <kg4eyg@...> wrote:


How do I change the order of of the log columns?  I looked in the settings and cannot find an option.  Thanks

Art Gribensk

On Sat, Jul 11, 2020, 20:44 Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jimmy,

Thanks for your follow up.  I'm sorry that you are still having trouble.  The rig interface code in all my software is identical and everything has been working fine here all day.  From a working contest program, while polling your rig, click the Save Settings button under the rig list at the lower left.  Start the IARU software and click the load settings button.  That should do the trick.

If that does not correct the problem, please let us know what rig you are interfacing and send a long a screen shot of your settings.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jimmy Tyree via groups.io <jimmy.tyree=yahoo.com@groups.io>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Jul 11, 2020 8:19 pm
Subject: Re: [N3FJPSoftwareUsers] IARU Contest log

Well, I went through it all and I give up. No biggie. Never had an issue with any other contest log. Good luck if your working the contest. 


On Sat, Jul 11, 2020 at 1:00 PM, Scott Davis via groups.io
<SNKDavis=aol.com@groups.io> wrote:
Hi Jimmy,

Thanks for your e-mail.  This FAQ will get you going (applies to band on the contest software as well):



Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jimmy Tyree via groups.io <jimmy.tyree=yahoo.com@groups.io>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Jul 11, 2020 12:56 pm
Subject: [N3FJPSoftwareUsers] IARU Contest log

Log keeps defaulting to 15m? will not stay on any other bed. Have gone through setting and every tab I can find. Switch over to the daily ACL and it works fine?


Re: IARU Contest log

Jimmy Tyree <jimmy.tyree@...>
 

Yes, I had the same idea so I closed down and re started - nothing helped. All works fine for the main / daily log, but this one is haunted - I will uninstall and reload for next year.

On Saturday, July 11, 2020, 8:11:29 PM CDT, Michael WA7SKG <wa7skg@...> wrote:


I had the same problem. Drove me nuts for a bit. Then I discovered I
somehow had two instances of the contest log running. Closed everything
down and restarted and worked fine after that.

Michael WA7SKG


Jimmy Tyree via groups.io wrote on 7/11/20 5:19 PM:
> Well, I went through it all and I give up. No biggie. Never had an issue
> with any other contest log. Good luck if your working the contest.
>
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers⁡_wl=ym⁡_sub1=Internal⁡_sub2=Global_YGrowth⁡_sub3=EmailSignature>
>
>    On Sat, Jul 11, 2020 at 1:00 PM, Scott Davis via groups.io
>    <SNKDavis=aol.com@groups.io> wrote:
>    Hi Jimmy,
>
>    Thanks for your e-mail.  This FAQ will get you going (applies to
>    band on the contest software as well):
>
>    AC Log always inserts CW or SSB in the Mode Field even when I try to
>    change it. <http://www.n3fjp.com/faq.html#q24>
>
>    http://www.n3fjp.com/faq.html#q24
>
>    Enjoy!
>
>    73, Scott
>    N3FJP
>    _http://www.n3fjp.com_ <http://www.n3fjp.com/>
>
>    /Serving the Amateur Radio community with contesting and general
>    logging software since 1997./
>
>    1 Peter 3 vs 15: /Always be prepared to give an answer to everyone
>    who asks you to give _the reason for
>    <http://www.n3fjp.com/Faith.htm>the hope that you have
>    <http://www.n3fjp.com/Faith.htm>_. But do this with gentleness and
>    respect/...
>
>
>    -----Original Message-----
>    From: Jimmy Tyree via groups.io <jimmy.tyree=yahoo.com@groups.io>
>    To: N3FJPSoftwareUsers@groups.io
>    Sent: Sat, Jul 11, 2020 12:56 pm
>    Subject: [N3FJPSoftwareUsers] IARU Contest log
>
>    Log keeps defaulting to 15m? will not stay on any other bed. Have
>    gone through setting and every tab I can find. Switch over to the
>    daily ACL and it works fine?
>
>



4101 - 4120 of 46920