Date   

6.2 to 6.3

n9dms@...
 

Noticing those of us who set up using 6.2 have regular filenames e.g. n9dms.html - we did this just few days before 6.3 became available.  Those who set up after downloading 6.3 get the word "contest" inserted in their web-page filename by default. e.g n9dms-contest.html   The question is, is there any harm to the the Club Score Processor or anything else by using the old file-naming convention that does not have the -contest inserted in it? eg n9dms.html  ?

Is 6.3 compatible with a Mac?  I scanned over that subject here but couldn't really tell what everyone was arguing about.

Thanks very much!!!   '73
N9DMS   Dave



Re: ACLog wants to Upload Old Log Entries

VE3QN
 

Thanks so much, Scott. Nothing could be simpler and that worked like a charm! 73, Bryan


Re: JS8CALL ??

 

yes steve i got it running thanks
73 dave nu4n


Re: Multiple rigs

Tom Ellis
 

 

Nate,

 

This link should get you going in the right direction:

 

http://www.n3fjp.com/faq.html#q105

 

Tom

K5TEE

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Nathan Lee
Sent: Thursday, June 25, 2020 7:21 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Multiple rigs

 

Good morning all.

 

I would like to use a rig dedicated to one band, and another for others. Can they both work on the logger.

Nate



 


Re: Multiple rigs

Scott Davis
 

Hi Nate,

Thanks for your e-mail.  Yes, please see this FAQ here:


http://www.n3fjp.com/faq.html#q105

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Nathan Lee <nathaniel.alee65@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 9:21 am
Subject: [N3FJPSoftwareUsers] Multiple rigs

Good morning all.

I would like to use a rig dedicated to one band, and another for others. Can they both work on the logger.

Nate



Multiple rigs

Nathan Lee <nathaniel.alee65@...>
 

Good morning all.

I would like to use a rig dedicated to one band, and another for others. Can they both work on the logger.

Nate


_._,_._,_



Re: JS8CALL ??

AI3KS
 

Dave,

Yes, there is an option to enable it on the reporting tab.

Steve, AI3KS

On 20/06/25 09:08, Dave Tucker Nu4N wrote:
Does ACLOG inface with JS8CALL. Or do you know of one ?
Thanks Stay Safe you and the xyl
73 Dave NU4N


JS8CALL ??

 

Does ACLOG inface with JS8CALL. Or do you know of one ?
Thanks Stay Safe you and the xyl
73 Dave NU4N


Re: Rig Control

James Artz
 

Thanks, I’m using a mac keyboard. However, I am seeing band mode frequency call sign section and state along the bottom. This is exported to ADIF for logged contacts when I export it?

On Thu, Jun 25, 2020 at 6:56 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your follow up.  To display frequency on the main form of the contest software, press Ctrl + Shift + F.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 7:50 am
Subject: Re: [N3FJPSoftwareUsers] Rig Control

Thank-you. I just don’t see that additional info on my looging screen, so you’re saying it is recording freq, etc., I’m just not seeing it on the window?

On Thu, Jun 25, 2020 at 6:47 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your follow up.  Once you are polling your rig, there is nothing else you have to do.  Your frequency, band and mode will be logged automatically.  You can also click on DX Spots to immediately tune to the spot frequency.

Go ahead and save your settings from the button under the rig list.  Then you can easily transfer it to AC Log.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 7:44 am
Subject: Re: [N3FJPSoftwareUsers] Rig Control

Hi Scott,
I got the software to control my rig, I played with the baud rate settings.
My question is this...will the frequency, power settings, band, etc now register when I log a QSO? If so, is there a video showing the proper setup? I am only using the Field Day software right now.
I want this info to export into my other logging software. If it doesn’t capture this info, the only use I see for rig control is to easily change a frequency. Are there any other features I am missing for rug control?
Thanks for your help!

On Wed, Jun 24, 2020 at 11:09 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I'm not familiar with Macs or the software you mentioned, but if it has control of the com port, my software won't be able to access it.  More details on that are here:



I hope that this helps!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:58 am
Subject: [N3FJPSoftwareUsers] Rig Control

I am trying to set up my KX3 for rig control, and it keeps saying Com4 is not available. I have set up MacLoggerDx on the mac side of my bootcamp, and it uses serial port.
What do I need to do to set up on the windows side of my bootcamp running Window 7 in this software?
Thank-you!
Jim
AC9QN


Re: Rig Control

Scott Davis
 

Hi Jim,

Thanks for your follow up.  To display frequency on the main form of the contest software, press Ctrl + Shift + F.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 7:50 am
Subject: Re: [N3FJPSoftwareUsers] Rig Control

Thank-you. I just don’t see that additional info on my looging screen, so you’re saying it is recording freq, etc., I’m just not seeing it on the window?

On Thu, Jun 25, 2020 at 6:47 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your follow up.  Once you are polling your rig, there is nothing else you have to do.  Your frequency, band and mode will be logged automatically.  You can also click on DX Spots to immediately tune to the spot frequency.

Go ahead and save your settings from the button under the rig list.  Then you can easily transfer it to AC Log.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 7:44 am
Subject: Re: [N3FJPSoftwareUsers] Rig Control

Hi Scott,
I got the software to control my rig, I played with the baud rate settings.
My question is this...will the frequency, power settings, band, etc now register when I log a QSO? If so, is there a video showing the proper setup? I am only using the Field Day software right now.
I want this info to export into my other logging software. If it doesn’t capture this info, the only use I see for rig control is to easily change a frequency. Are there any other features I am missing for rug control?
Thanks for your help!

On Wed, Jun 24, 2020 at 11:09 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I'm not familiar with Macs or the software you mentioned, but if it has control of the com port, my software won't be able to access it.  More details on that are here:



I hope that this helps!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:58 am
Subject: [N3FJPSoftwareUsers] Rig Control

I am trying to set up my KX3 for rig control, and it keeps saying Com4 is not available. I have set up MacLoggerDx on the mac side of my bootcamp, and it uses serial port.
What do I need to do to set up on the windows side of my bootcamp running Window 7 in this software?
Thank-you!
Jim
AC9QN


Re: Rig Control

James Artz
 

Thank-you. I just don’t see that additional info on my looging screen, so you’re saying it is recording freq, etc., I’m just not seeing it on the window?

On Thu, Jun 25, 2020 at 6:47 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your follow up.  Once you are polling your rig, there is nothing else you have to do.  Your frequency, band and mode will be logged automatically.  You can also click on DX Spots to immediately tune to the spot frequency.

Go ahead and save your settings from the button under the rig list.  Then you can easily transfer it to AC Log.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 7:44 am
Subject: Re: [N3FJPSoftwareUsers] Rig Control

Hi Scott,
I got the software to control my rig, I played with the baud rate settings.
My question is this...will the frequency, power settings, band, etc now register when I log a QSO? If so, is there a video showing the proper setup? I am only using the Field Day software right now.
I want this info to export into my other logging software. If it doesn’t capture this info, the only use I see for rig control is to easily change a frequency. Are there any other features I am missing for rug control?
Thanks for your help!

On Wed, Jun 24, 2020 at 11:09 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I'm not familiar with Macs or the software you mentioned, but if it has control of the com port, my software won't be able to access it.  More details on that are here:



I hope that this helps!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:58 am
Subject: [N3FJPSoftwareUsers] Rig Control

I am trying to set up my KX3 for rig control, and it keeps saying Com4 is not available. I have set up MacLoggerDx on the mac side of my bootcamp, and it uses serial port.
What do I need to do to set up on the windows side of my bootcamp running Window 7 in this software?
Thank-you!
Jim
AC9QN


Re: Rig Control

Scott Davis
 

Hi Jim,

Thanks for your follow up.  Once you are polling your rig, there is nothing else you have to do.  Your frequency, band and mode will be logged automatically.  You can also click on DX Spots to immediately tune to the spot frequency.

Go ahead and save your settings from the button under the rig list.  Then you can easily transfer it to AC Log.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 7:44 am
Subject: Re: [N3FJPSoftwareUsers] Rig Control

Hi Scott,
I got the software to control my rig, I played with the baud rate settings.
My question is this...will the frequency, power settings, band, etc now register when I log a QSO? If so, is there a video showing the proper setup? I am only using the Field Day software right now.
I want this info to export into my other logging software. If it doesn’t capture this info, the only use I see for rig control is to easily change a frequency. Are there any other features I am missing for rug control?
Thanks for your help!

On Wed, Jun 24, 2020 at 11:09 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I'm not familiar with Macs or the software you mentioned, but if it has control of the com port, my software won't be able to access it.  More details on that are here:



I hope that this helps!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:58 am
Subject: [N3FJPSoftwareUsers] Rig Control

I am trying to set up my KX3 for rig control, and it keeps saying Com4 is not available. I have set up MacLoggerDx on the mac side of my bootcamp, and it uses serial port.
What do I need to do to set up on the windows side of my bootcamp running Window 7 in this software?
Thank-you!
Jim
AC9QN


Re: Rig Control

James Artz
 

Hi Scott,
I got the software to control my rig, I played with the baud rate settings.
My question is this...will the frequency, power settings, band, etc now register when I log a QSO? If so, is there a video showing the proper setup? I am only using the Field Day software right now.
I want this info to export into my other logging software. If it doesn’t capture this info, the only use I see for rig control is to easily change a frequency. Are there any other features I am missing for rug control?
Thanks for your help!

On Wed, Jun 24, 2020 at 11:09 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I'm not familiar with Macs or the software you mentioned, but if it has control of the com port, my software won't be able to access it.  More details on that are here:



I hope that this helps!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:58 am
Subject: [N3FJPSoftwareUsers] Rig Control

I am trying to set up my KX3 for rig control, and it keeps saying Com4 is not available. I have set up MacLoggerDx on the mac side of my bootcamp, and it uses serial port.
What do I need to do to set up on the windows side of my bootcamp running Window 7 in this software?
Thank-you!
Jim
AC9QN


Re: Possible feature addition to AC Log Web Upload

Scott Davis
 

Thanks for sending along your thoughts and suggestions Matt!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Matt Patterson <W5llmatt@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 12:58 am
Subject: [N3FJPSoftwareUsers] Possible feature addition to AC Log Web Upload

Hi Scott,

I realize this probably wouldn't be on the high priority list but I utilize AC Log's web Upload feature to update my website with my online log.  I was wondering if you could change it to where either the comments field or one of the other fields could be added and displayed after the State column on the web page?  I would just like to be able to add a few notes about each contact and have those appear on the website along with the contact info.  You probably wouldn't want to want to add the comments field to the website as that is where the address info gets put in AC Log  so that's why I mentioned using the other field instead.

73 Matt
W5LL


Re: Possible Changes to Next Version of AClog

Scott Davis
 

Thanks for sending along your thoughts and suggestions Phil!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: philp51 <philp51@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:41 pm
Subject: [N3FJPSoftwareUsers] Possible Changes to Next Version of AClog

Hi Scott, would it be possible to add the option of only hearing spots for New countries instead of Unconfirmed. Also could foreign characters like umlauts,tildes etc. be recognized when logging from QRZ database. Tnx..Phil


Possible feature addition to AC Log Web Upload

Matt Patterson
 

Hi Scott,

I realize this probably wouldn't be on the high priority list but I utilize AC Log's web Upload feature to update my website with my online log.  I was wondering if you could change it to where either the comments field or one of the other fields could be added and displayed after the State column on the web page?  I would just like to be able to add a few notes about each contact and have those appear on the website along with the contact info.  You probably wouldn't want to want to add the comments field to the website as that is where the address info gets put in AC Log  so that's why I mentioned using the other field instead.

73 Matt
W5LL


Re: Trying to set up FT-991 for rig control

nb7o
 

Norm,

 

Check our email.  I just sent you a message.

 

Seven three de Kevin/NB7O


Possible Changes to Next Version of AClog

philp51
 

Hi Scott, would it be possible to add the option of only hearing spots for New countries instead of Unconfirmed. Also could foreign characters like umlauts,tildes etc. be recognized when logging from QRZ database. Tnx..Phil


Re: Grid for a contact in LOTW

vhfer2001 <n7au@...>
 

That was my thought also Scott. And it is listed there in TQSL.
OK I'LL get off here and check with the LOTW desk.

Thanks Scott and everyone else.
Bob
N7AU
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.

On 6/24/20, 5:19 PM "Scott Davis via groups.io" <SNKDavis@...> wrote:
Hi Bob,

Thanks for your e-mail.  Your grid is specified in TQSL, not AC Log.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: vhfer2001 <n7au@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 7:59 pm
Subject: Re: [N3FJPSoftwareUsers] Grid for a contact in LOTW

I think so. What could I be uploading differant? Up loading new contacts. If I change something in the contact than something won't be right unless it is just a name but that doesn't show up either. How do I add the grid to make it shoe up?
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.
On 6/24/20, 4:38 PM "Larry Banks via groups.io" <larryb.w1dyj@...> wrote:
Hi Bob,

Are you selecting the correct LOCATION in the N3FJP LoTW upload screen?

73 -- Larry -- W1DYJ


-----Original Message-----
From: vhfer2001
Sent: Wednesday, June 24, 2020 19:29
To: N3FJPSoftwareusers@groups.io
Subject: [N3FJPSoftwareUsers] Grid for a contact in LOTW

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus








Re: Grid for a contact in LOTW

Scott Davis
 

Hi Bob,

Thanks for your e-mail.  Your grid is specified in TQSL, not AC Log.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: vhfer2001 <n7au@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 7:59 pm
Subject: Re: [N3FJPSoftwareUsers] Grid for a contact in LOTW

I think so. What could I be uploading differant? Up loading new contacts. If I change something in the contact than something won't be right unless it is just a name but that doesn't show up either. How do I add the grid to make it shoe up?
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.
On 6/24/20, 4:38 PM "Larry Banks via groups.io" <larryb.w1dyj@...> wrote:
Hi Bob,

Are you selecting the correct LOCATION in the N3FJP LoTW upload screen?

73 -- Larry -- W1DYJ


-----Original Message-----
From: vhfer2001
Sent: Wednesday, June 24, 2020 19:29
To: N3FJPSoftwareusers@groups.io
Subject: [N3FJPSoftwareUsers] Grid for a contact in LOTW

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus







6001 - 6020 of 48451